Good NS0-593 Exam Dumps Save Your Preparation Time

Network Appliance NS0-593 dumps questions are an essential tool for anyone looking to pursue the NetApp Certified Support Engineer (NCSE) certification. By using these NS0-593 dumps questions as part of your exam preparation, you can gain a deeper understanding of the exam format, identify knowledge gaps, build confidence, get real-time feedback, and stay up-to-date with the latest trends in NetApp Certified Support Engineer ONTAP Specialist. So, if you're serious about achieving NS0-593 certification success, be sure to incorporate NS0-593 exam dumps questions into your study plan. Test free Network Appliance NS0-593 exam dumps below.

Page 1 of 2

1. Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS) capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is only responding with one data LIF. DDNS is enabled on the domain controllers.





Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose two.)

Disable the -vserver-fqdn parameter for the SVM DDNS services.

Remove the NFS protocol from the cifs_01 data LI

Enable the -use-secure parameter for the SVM DDNS services.

Enable the -is-enabledparameter for the SVM DDNS services

 Loading...

2. Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an identification of “1.SHFHUXXXXXXXXXX."

What is the cause of the reported Issue?

The shelf has been power cycled.

A new shelf was added to the controller.

The shelf had a disk replaced too quickly.

The shelf was cabled Incorrectly.

 Loading...

3. A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards, the customer found that the directory owner was changed from root to nobody.

In this scenario, which statement is true?

The customer did not configure name services on the SV

The clients must be restarted to start using NFSv4.

The export policy is not configured properly.

The ID mapping domains do not match between the client and server.

 Loading...

4. Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP 9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are placed into the FlexGroup volume.

In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)

-v3-64bit-identifiers

-v4-fsid-change

-v3-fsid-change

-v4-64bit-idantifiers

 Loading...

5. Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.

In this scenario, what Is the cause of this problem?

Newer Snapshot copies than the common snapshot that was chosen for resync were removed automatically at the destination.

The autodelete option removed Snapshot copies before the resync.

Snapshot copies were manually removed from the destination after the resync.

NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.

 Loading...

6. You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet trace.

In this scenario, after you generate the packet trace, where do you find the trace file?

/packet_traces of the node hosting the LIF

/etc/log/packet_traces of the node hosting the LIF

/etc/log/mlog/packet._traces Of all nodes

/vol0/paclcet_traces of the CIFS SVM

 Loading...

7. A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1. You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.





What is the cause of the customer's problem?

The cable is plugged in upside down.

The incorrect cable is used.

The ports are configured for 4x10Gbit instead of 40Gbit.

The port has an incorrect SFP inserted.

 Loading...

8. A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume. When opening the file later from a Windows system, it was not the file that they wanted. The file that they wanted was named TEST~1.TXT.

Which statement explains this behavior?

UNIX name mapping updated the filename.

A Snapshot copy preserved two versions of the file.

Windows Volume Shadow Copy Service stored an older version of the file.

Case Insensitivity of SMB clients caused the file to be displayed with a different name.

 Loading...

9. You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show command for more Information. You notice the "Urge" column has non-zero values.

In this scenario, which statement is true?

The aggregate is completely full.

The constituent volumes are out ofInodes.

The data placement is uneven.

The constituent volumes are completely full.

 Loading...

10. A storage administrator reports that a monitoring toot is reporting that the storage controller reads between 90% to 93% CPU use.

You run the sysstat -m command against thenode in question.





Referring to the exhibit, which statement is correct?

The customer should be advised to exclude certain workflows to reduce use.

High network exempt use could be a problem.

You should immediately investigate further bygathering perfstat data and opening a support case.

The CPU Is not a first-order monitoring metric for ONTA

 Loading...

Page 2 of 2

11. You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination system. They are worried about high CPU and disk usage without any user operations.

In this situation, what should you tell the customer?

Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.

Explain that background tasks such as SnapMirror throttle up in the absence of user workload.

Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.

Explain that only user workload should use the CPU and Investigate further.

 Loading...

12. Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports that the server's FC HBA port Is online, but the LUN does not show up.





Referring to the exhibit, what is the reason for this problem?

The FC service has not been configured on the SV

The zoning on the FC switches Is Incorrect.

The LUN Is not mapped to the correct SCSI I

The esxserver igroup contains incorrect IQNs.

 Loading...

13. A customer with an FC MetroClusterconfiguration that is running NetApp ONTAP 9.8 software experienced a site outage and wants to know why the MetroClusler configuration did not switch over to the other site.

What are two reasons for this problem? (Choose two.)

There was a failed PSU in the switchover site.

The ISLs were down between the sites.

The site had unmirrored aggregates.

An ISL link was not operating at 16Gbps.

 Loading...

14. Which two automation methods does NetApp ONTAP Select support? (Choose two.)

REST

Anslble

Docker

PHP

 Loading...

15. 1.After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is accessed indirectly. The system node run -node -command netstat command shows retransmits and packet drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP 9.8 software.

In this scenario, what is causing this problem?

The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.

AFF A300 and AFF A700 node mixing Isnot supported in ONTAP 9.8 software.

The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.

There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supportedversion.

 Loading...

16. Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer version. After investigating the event logs and the SnapMirror history, you see information about delayed updates of the SnapMirror relationships.

How would your customer prevent such problems in the future?

Quiesce the SnapMirror relationships before upgrading the ONTAP software.

Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.

Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.

Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.

 Loading...

17. You recently discovered the error message shown below in your ONTAP logs.





What should be your first action to correct this Issue?

Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol volume.

Determine the root cause behind the inconsistency before attempting any recovery procedure.

Use the storage takeover command on the storage controller that contains my_data_vol.

Use the wafliron command against my_data_vol to solve the inconsistency on the volume.

 Loading...

 Loading...