Good D-VXR-OE-01 Exam Dumps Save Your Preparation Time

Category:

Comments:

0 Comments

Post Date:

June 12, 2025

DELL EMC D-VXR-OE-01 dumps questions are an essential tool for anyone looking to pursue the Dell Hyperconverged Infrastructure certification. By using these D-VXR-OE-01 dumps questions as part of your exam preparation, you can gain a deeper understanding of the exam format, identify knowledge gaps, build confidence, get real-time feedback, and stay up-to-date with the latest trends in Dell VxRail Operate v2 Exam. So, if you're serious about achieving D-VXR-OE-01 certification success, be sure to incorporate D-VXR-OE-01 exam dumps questions into your study plan. Test free DELL EMC D-VXR-OE-01 exam dumps below.

Page 1 of 9

1. What is the block size and object level of the vSAN deduplication algorithm?

8 KB per datastore

4 KB per disk group

4 KB per datastore

8 KB per disk group

2. What is the benefit of using VxRail Appliance REST API?

It simplifies hardware upgrades.

It allows for remote management of the system.

It enables automation of routine tasks.

It provides enhanced security features.

3. What is the primary benefit of using the VxRail Plugin for vCenter Server?

It provides a graphical interface for hardware management.

It integrates VxRail management into the vCenter interface.

It enables direct access to VMware support.

It simplifies the installation of third-party applications.

4. SIMULATION

During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is

required to be enabled so the node can be correctly identified in the physical rack.

Use the simulator to enable the System LED for the node.

5. A failure occurs while upgrading a VxRail cluster.

Which log file should be analyzed?

loudmouth.log

platform_svc.log

marvin.log

lcm-web.log

6. Where in the VxRail Plugin can log bundles be generated?

Monitor > VxRail > Issues and alarms

Configure > VxRail >Troubleshooting

Monitor > VxRail > Security

Configure > VxRail > Support

7. SIMULATION

An administrator must upgrade a VxRail cluster 7.0.x at a dark site.

The credentials for the system are:

VxRail Manager username: root

VxRail Manager password:

VMw@r3!123

vCenter Administrator:

[email protected]

vCenter Administrator password:

VMw@r3!123

VCSA username: root

VCSA password: VMw@r3!123

Use the simulator to upgrade the cluster to the latest recommended version.

8. SIMULATION

A VxRail administrator is concerned about security and wants to protect the vSAN storage against unauthorized access (for both data on disk and in flight.)

Use the simulator to enable the relevant services. A vSphere Native Key Provider has already been configured.

9. What authorization method is used tor VxRail API calls?

Auth

HTTP Basic

API Keys

OpenID Connect

10. How is cluster resource contraction performed in a VxRail environment?

By removing physical nodes

By reducing virtual machine allocations

Through decommissioning storage devices

By downgrading software versions

Page 2 of 9

11. What is the role of VMware vSAN in the management of a VxRail cluster?

It manages the hypervisor settings only.

It primarily configures external storage interfaces.

It aggregates server-attached storage to create a shared datastore.

It handles network configurations between VxRail nodes.

12. An environment has two VxRail clusters In vCenter there is only one vSphere Distributed Switch object for both clusters.

Which deployment architecture was used for these clusters?

External vCenter Server with external DNS

External vCenter Server with internal DNS

Internal vCenter Server with external DNS

Internal vCenter Server with internal DNS

13. An administrator wants to implement a disaster recovery solution. Two sites are available. The primary site uses VxRail and the secondary site uses a non-vSAN VMware environment.

Which technology minimizes data loss with the smallest recovery point objective for this scenario?

VMware HA

RecoverPoint for VMs

vSphere Replication

Stretched Cluster

14. An administrator is trying to replace the VxRail Manager Certificate.

Where in the vSphere Client is the option located?

Menu > VxRail > Configuration > Certificates

Cluster > Configure > VxRail > Certificate

Cluster > Configure > VxRail > Hosts

Menu > Administration > Certificates > Certificate Management

15. What is the maximum number of disk groups supported by a VxRail P Series node?

16. How is vSAN Health monitored within a VxRail environment?

Through the vSAN Health Check plug-in

Using third-party monitoring tools

Via the VxRail Manager interface

Through direct console access

17. Which resource should an administrator use when beginning a VxRail cluster design?

VxRail Quick Reference List

VxRail Administrator Guide

VMware documentation

VxRail Network Planning Guide

18. How are software updates typically applied in VxRail?

Through direct internet downloads

Via an integrated update manager

Manually from a local server

By using a scheduled script

19. When a RAID-5 storage policy is used, what is the minimum number of VxRail nodes required for vSAN self-healing after a failure?

20. How are updates typically deployed on a VxRail system?

Individually on each node

Simultaneously across all nodes

In a phased manner per cluster

Only manually during off-peak hours

Page 3 of 9

21. What role does the vSAN Storage Policy play in VxRail?

It determines the storage requirements for virtual machines.

It configures network policies for the cluster.

It sets the security standards for data at rest.

It manages the power settings for the hardware.

22. Which of the following is a typical feature of VxRail cluster management via the vCenter plugin?

Dynamic load balancing of storage I/O

Automatic migration of VMs between clusters

Centralized management of multiple clusters

Real-time analytics of user data

23. Where is the VxRail Dashboard located in the vSphere client?

Hosts and Clusters > Monitor > VxRail

Menu > Administration

Menu > VxRail

Hosts and Clusters > Configure > VxRail

24. What is the correct path for editing the Object Repair Time from the vCenter client?

Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host)

Cluster > Monitor > vSAN > Services > Object Repair Timer

Cluster > Configure > vSAN > Services > Advanced Options > Edit

Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host)

25. An application VM must tolerate two faults.

Which VxRail cluster configurations would support this requirement?

FTT=2 with mirroring across a five node Cluster FTT=2 with erasure coding across a six node Cluster

FTT=2 and two Fault domains FTT=2 and mirroring across a four node Cluster

FTT=2 with erasure coding across a five node Cluster FTT=2 with mirroring across a four node Cluster

FTT=2 with mirroring across a three-node cluster. FTT=2 with erasure coding across a four-node cluster.

26. When does vSAN deduplication occur in a VxRail cluster?

During destage from the cache tier to the capacity tier

During writes from the host to the cache tier

During writes from the host to the capacity tier

During destage from the capacity tier to the cache tier

27. Cable VxRail PCIe ports to ToR switches

28. A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.

Where is this information located in the vSphere Client?

Configure > vSAN > Services > Object repair timer

Monitor > vSAN > Resyncing Objects

Monitor > vSAN > Data Migration Pre-Check

Configure > vSAN > Disk Management

29. Which authentication method is used in VxRail API?

JSON Web Token

PSC SSO

SAML

OAuth

30. An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster. The administrator needs more information to resolve the security issues.

What should be used to gather the required information?

Advisories

Event Codes

Health Analyzer

Skyline Health

Page 4 of 9

31. An organization wants to implement a zero data loss protection solution for its virtual machines.

What is the recommended solution when using a VxRail system?

RecoverPoint for VMs

Stretched clusters

PowerProtect software

VMware site recovery

32. Which task would you use the VxRail API to perform?

Check the real-time network traffic statistics.

Automatically expand the storage capacity.

Retrieve system logs for analysis.

Integrate with a third-party monitoring tool.

33. What is a benefit of using a trusted third party or an organization CA in VxRail Manager?

Allows decrypted communication over trusted secured networks

Minimal client configuration for trust relationships

Secured trust relationship between internal and external servers

Eables secure digital trust network verification over unsecured networks

34. How do you perform a VxRail software upgrade?

By downloading the update to a USB and manually installing on each node.

Through an automated process managed by VxRail Manager.

By requesting Dell EMC to remotely install the update.

Installing update packages directly through VMware vCenter.

35. A VxRail administrator has determined that the stretched cluster storage is being consumed by non-critical VMs that do not require failover capabilities. These VMs have no performance or location requirements.

Which 'Site disaster tolerance' storage policy will minimize the storage usage?

1 Failure - RAID-5 (Erasure Coding)

Dual site mirroring (stretched cluster)

None - stretched cluster

No data redundancy

36. Create a VDS with the required number of uplinks.

37. Which VxRail cluster can tolerate a host failure?

Number of Nodes: 3 Compute Utilization: 70%

Number of Nodes: 4 Compute Utilization: 80%

Number of Nodes: 6 Compute Utilization: 85%

Number of Nodes: 12 Compute Utilization: 85%

38. An administrator must shut down a VxRail cluster However the validation process has failed and cannot be completed

What action must be taken to correct the issue?

Turn oft cluster health monitoring

Put all nodes are in maintenance mode.

Disconnect all nodes from external storage

Shut down all client VMs.

39. How are software updates applied in a VxRail environment?

Manually through each node's direct interface

Automatically through VxRail Manager

Via scripts run from vCenter

Through scheduled tasks within the operating system

40. How can the vSAN configuration of a VxRail cluster be validated?

Using the vSphere Web Client

Through VxRail Manager

By checking the physical disk layout

All of the above

Page 5 of 9

41. What is a supported feature when using a vSAN HCI Mesh?

Two-node vSAN clusters

Data in Transit Encryption

vSAN file services

Storage vMotion

42. Which three processes are performed during a VxRail cluster shutdown? (Select 3)

vSphere HA is disabled.

Health monitoring is enabled.

vSphere DRS is disabled.

Client VMs are shut down.

Service VMs are migrated.

43. When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur?

Immediately

Every 5 minutes

Every 60 minutes

As new data is written

44. What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters?

Disabled

Power off and restart VMs

Issue events

Shut down and restart VMs

45. A VxRail cluster is supporting a VDI workload using full clones.

What is the recommended space efficiency setting for this workload?

Deduplication disabled, Compression enabled

Deduplication enabled, Compression disabled

Deduplication enabled, Compression enabled

Deduplication disabled, Compression disabled

46. A VxRail administrator is trying to run a Storage Performance Test for vSAN. However, they do not see that option in vCenter.

What could be the reason?

vSphere version is 6.5.0 EP04

vSphere version is 6.5.0 U1

VxRail Manager version is 4.5.211

VxRail Manager version is 4.5.101

47. A VxRail Cluster has been deployed with four VxRail E560 nodes each using tour integrated NIC ports and the default network profile.

Which vmnics carry the VxRail management traffic, and in what teaming and failover configuration?

vmnic0 and vmnid active/active pair with link aggregation

vmnict and vmnic2 active/standby pair with link aggregation

vmnic0 and vmnid actrve/standby pair with no link aggregation

vmnic0 and vmnic3 active/active pair with no link aggregation

48. What is involved in performing a VxRail Manager File-based Backup?

Exporting appliance configuration settings

Copying all VMs to a secondary storage

Backing up the entire vCenter database

Saving network configuration exclusively

49. A customer requires an All-Flash system, with compression and deduplication, RAID-5/6 capability, and Data at Rest Encryption.

Which vSAN license level should be recommended?

Advanced

Enterprise

Enterprise Plus

Standard

50. For how long is the vSAN Health history of the VxRail system stored?

15 days

60 days

30 days

45 days

Page 6 of 9

51. In a VxRail G560 node, which integrated NIC port is the Active port for vSAN traffic?

Uplink 1

Uplink 2

Uplink 3

Uplink 4

52. What API is used to perform tasks in a VxRail environment?

SOAP API

VxRail REST API

vSphere API

vSAN API

53. How does VxRail support cluster scalability?

By allowing manual intervention for resource allocation

By supporting dynamic resource scheduling

Through automated load balancing

All of the above

54. What are the latency and bandwidth requirements between data sites when deploying a VxRail Stretched Cluster?

Latency less than 5 ms Minimum bandwidth of 10 Gbps

Latency less than 10 ms Minimum bandwidth of 10 Gbps

Latency less than 10 ms Minimum bandwidth of 20 Gbps

Latency less than 200 ms Minimum bandwidth of 1 Gbps

55. SIMULATION

An existing 4-node VxRail standard cluster has to be scaled out with 2 additional nodes and configured as a stretched cluster.

An administrator must prepare a vSAN storage policy that should have the following:

- vSAN Policy Name: vSAN Stretched Cluster

- Data protection across the sites

- Local protection: RAID-1 with FTT=1

- Thick Provisioning

An administrator should be able to provision a VM even if the currently available cluster resources cannot satisfy the current policy.

Use the simulator to create the required vSAN storage policy.

56. A customer will be managing multiple VxRail clusters using 7.0.130 or greater. There is no budget allocated for additional servers or licenses. The customer prefers to have a single vCenter.

What is the recommended vCenter deployment option?

Internal vCenter Servers with Enhanced Link Mode

Internal vCenter Server with VxRail supplied Standard license

External vCenter Servers with Enhanced Link Mode

External vCenter Server with VxRail supplied Standard license

57. In a VxRail appliance, which task is performed using VxRail Manager?

Create storage pools

Remediate health events

Manage VxRail users and roles

Perform software upgrade

58. VxRail 4.5.200 has been deployed with the VxRail deployed vCenter.

What is the name of the vCenter datacenter for the newly deployed VxRail cluster?

"˜Marvin-Datacenter"™

"˜VxRail-Datacenter"™

"˜VxRail-Virtual-SAN"™

Datacenter name used during deployment

59. By default, how often does the vSAN Skyline Health check run?

60 Minutes

30 Minutes

45 Minutes

15 Minutes

60. In which environment is it recommended to enable vSAN deduplication and compression?

VDI Using Linked Clones

OLTP Databases

Mixed Workloads

VDI Using Full Clones

Page 7 of 9

61. A VxRail administrator has been informed by Dell EMC that an Internet software upgrade is available for their VxRail cluster. The administrator logs into VxRail Manager. VxRail Manager shows only the Local Upgrade option and not the Internet Upgrade option.

What is a possible reason?

The VxRail Manager user has insufficient privileges

Workstation accessing VxRail Manager does not have Internet connectivity

Secure Remote Services has not been enabled

VxRail Manager VM does not have Internet connectivity

62. An administrator has been performing maintenance on a host for the past 60 minutes. The node was put in maintenance mode with ‘ensure accessibility’ selected. Users begin to cite poor performance on the cluster.

What is causing the poor performance?

vSAN is applying a new storage policy

Non-compliant objects have begun to rebuild

Network is trying to reconnect to the missing node

Cached data are being destaged to disk

63. Which vSAN troubleshooting option provides improvement recommendations for the VxRail cluster?

Skyline Health

HCIBench

Network Performance Test

VM Creation Test

64. What is a network consideration for VxRail version 4 5.x?

IPv4 Multicast is not required

IPv4 Multicast and IPv6 Multicast are required

IPv4 Multicast is required

IPv6 Multicast is not required

65. Which VxRail model series supports only hybrid disks?

S Series

P Series

E Series

G Series

66. What is a consideration when using a VxRail Cluster with vSphere Standard Edition licensing?

Administrative workload is decreased

Workload balancing is automated

vGPU is not supported

Drive replacement is streamlined

67. When using a vSAN storage policy with FTT = 1 and FTM = Mirroring, how many witness components exist for a VMDK?

68. At what object level is vSAN deduplication and compression enabled for a VxRail system?

Cluster

Virtual machine

Disk group

Datacenter

69. Which level of data protection can be configured across sites in a VxRail Stretched Cluster?

RAID 1

RAID 5

RAID 1/10

RAID 6

70. If automatic rebalancing is not configured, when does vSAN perform reactive rebalancing?

capacity utilization nears or exceeds 85%

capacity utilization nears or exceeds 75%

capacity utilization nears or exceeds 90%

capacity utilization nears or exceeds 80%

Page 8 of 9

71. You are checking the overall health of the VxRail vSAN environment.

Which VMware interface are you using?

vSphere Web Client

vSphere Client

Host Client

Update Manager

72. For what purpose is the VxRail REST API primarily used?

To enhance security via encrypted connections

To enable user interface customization

To facilitate automation of management tasks

To increase storage capacity remotely

73. You are planning to install CloudArray Virtual Edition.

Where should you navigate to in VxRail Manager?

Config > System

Config > General

Support > Download

Config > Market

74. What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?

Host client

vCenter

VxRail Manager

ESXi

75. Use what network configuration is considered a best practice for VxRail clusters? Choose the correct option from the given list.

Traffic segmentation with VLANS

Available Production Ports

Available Management Ports

IPv6 Multicast

76. What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?

Add Disk Enable Disk LEDs

Replace Disk Shutdown Host

Add Disk Shutdown Host Enable Chassis LED

Replace Disk Shutdown Host Enable Chassis LED

77. A VxRail administrator observes alarms that start with VXR in the vSphere client.

How can they obtain information about the alarms and the related knowledge base articles?

Go to the Alarm Definitions page and click the KB link.

Use the VxRail Event Code Reference.

Use the VxRail Administration Guide.

Consult the General VMware Knowledge Base.

78. What is the vSAN automatic rebalancing threshold recommended by VMware?

25%

15%

30%

20%

79. An environment has two VxRail Clusters with this configuration:

- VMs on Cluster-A use a policy with FTT = 1 and FTM = Erasure Coding.

- VMs on Cluster-B use a policy with FTT = 1 and FTM = Mirroring.

A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.

How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?

33 GB

50 GB

67 GB

100 GB

80. A VxRail administrator wants to search for VxRail related knowledge base articles through the VxRail Manager user interface.

Which action must the administrator perform to use this feature?

Work with Dell EMC to register the VxRail appliance in the install Database

Set the Dell EMC Support username and password in VxRail Manager

Configure proxy settings in VxRail Manager for access to the Internet

Page 9 of 9

81. What are two failure states of vSAN components? (Select 2)

Orphaned

Degraded

Absent

Inaccessible

82. A customer has a large storage capacity and low I/O performance requirements.

Which VxRail solution is the best fit?

E Series

P Series

S Series

V Series

83. An administrator has logged into their VxRail cluster and noticed that all nodes are in a disconnected state. Upon logging into individual nodes, all workloads are running and no services have been affected. The licensing applied to the cluster is still in Evaluation mode. The administrator sees an unused vSphere License Key.

What steps should the administrator follow to properly license the cluster?

Select Administration > Licensing > Licenses, and apply a valid license key.

Select Administration > Licensing > Licenses > Assets > vSAN Clusters, and Assign License.

Select Administration > Licensing > Licenses > Add > Enter License Keys.

Select Administration > Licensing > Licenses > Synchronize Licenses.

84. A VxRail administrator observes alarms that start with VXR... in the vSphere client.

How should the administrator find detailed information about the alarms and related knowledge-base articles?

Refer to the VxRail Event Code Reference

Click the KB link in the Alarm Definitions page

Refer to the VxRail Administration Guide

Click the Ask Dell EMC link in the Triggered Alarms page

85. What functionality does the VxRail Appliance REST API provide?

It offers real-time analytics on data usage.

It enables task automation and system monitoring.

It strictly manages user access and permissions.

It provides firewall services for network security.

86. What is the maximum number of remote vSAN data stores a client cluster can mount using vSAN HCI Mesh?

87. After a successful code upgrade of a VxRail Cluster, the administrator views the installed components in the vSphere client to validate the code levels.

Which component will be listed?

BOSS Firmware

iDRAC

Secure Remote Services

ESXi

88. When is the vSAN performance service typically enabled?

Automatically during cluster deployment

During periodic customer reviews

During diagnosis through a vendor support case

Manually during cluster deployment

TAGS:

D-VXR-OE-01, D-VXR-OE-01 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-VXR-OE-01 Dumps Full Version

Q&As: 195
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Good D-VXR-OE-01 Exam Dumps Save Your Preparation Time

Related

Posts

Improve Your Knowledge with D-PVM-DS-01 Exam Dumps

Online D-VXR-DS-00 Exam Dumps Help You Build Confidence

Prepare D-PVM-DS-01 Exam with Using D-PVM-DS-01 Dump Questions

Improve Your Knowledge with D-CIS-FN-01 Exam Dumps

About Us

EMAIL

Services

Opening Hours