220-1201 Dumps Questions – Effective Way to Get Certified

1. A company provides cell phones to employees who travel internationally. An employee brings their phone to the help desk so the necessary equipment can be installed. However, the technician cannot install any new hardware on the phone.

Which of the following will the technician require so the phone can connect to a different provider?

2. A network operations analyst receives an automated alert regarding a server with an array. The analyst walks over to the server and sees a blinking orange light at the hard disk bay. The server is configured for RAID 1.

Which of the following should the analyst do to resolve this issue?

3. Which of the following storage options would a technician most likely recommend to have large amounts of affordable capacity without concern for read times on a desktop computer?

4. Which of the following can carry data and electricity to network devices? (Select two).

5. A technician installs an upgraded wireless access point. The technician then notices the activity light comes on briefly and turns off. The access point continues to exhibit this behavior repeatedly and does not come online.

Which of the following is the most likely cause of this issue?

6. Which of the following best represents the purpose of NFC?

7. Which of the following printing initiatives would be best to accomplish environmentally friendly objectives?

A. Requiring user authentication for printing

B. Locking down printing to only certain individuals

C. Modifying duplex settings to double-sided

D. Changing the print quality settings to best

8. SIMULATION

A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.

The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.



INSTRUCTIONS

Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly

There are 3 steps and the simulation starts on step 1.

9. A technician has discovered that some users are connected to a network that is not available on the user interface.

Which of the following is the most effective tool the technician can use to identify networks that are not broadcasting SSIDs?

A. Cable tester

B. Toner probe

C. Wi-Fi analyzer

D. Loopback plug

10. A technician is troubleshooting an all-in-one laser printer that prints a vertical line when making copies and scans. When users print or receive faxes, the output from the printer is correct.

Which of the following should the technician examine to determine the cause of the issue?

11. The output from a dot matrix printer has become lighter over time.

Which of the following should a technician do to fix the issue?

12. A technician is setting up a new SOHO wireless router.

According to security best practices, which of the following should the technician do first?

13. A technician receives a tablet that looks like it has a bulge inside. The bulge is pushing the screen away from the backplate. The tablet still turns on when it is plugged in, but the screen looks damaged and turns off when unplugged.

Which of the following is the most likely cause of this issue?

14. A technician sets up secure print and configures an NFC device that will authenticate users for access.

Which of the following will the NFC device most likely use to authenticate?

15. Which of the following networking devices is used to create a mesh network?

16. Which of the following devices has ACL capabilities?

17. A user brings a laptop to work every morning, correctly seats it in the docking station and then opens the laptop to begin work with no issues After the user left the laptop at home during a two-week vacation the laptop is no longer working. Upon returning to the office, the user reports that the keyboard and display are no longer working.

Which of the following should the technician ask the user to do first?

A. Ensure the docking station is plugged in.

B. Press and release the laptop power button.

C. Plug the laptop in and let it charge overnight

D. Connect the laptop directly to the network.

18. Which of the following can a user utilize to share their mobile phone connection with their laptop?

19. A user connects their laptop to a projector in a conference room. Once connected, the user reports the screen is smaller at the bottom than at the top. The user tries restarting the laptop and then disconnecting and reconnecting the cable to the projector.

Which of the following should a technician do to resolve the issue?

20. Which of the following is an advantage of using VDI?

21. A technician needs to confirm that desktop PCs can be deployed to a global, remote workforce.

Which of the following specifications should the technician validate?

22. When installing a network printer, a technician needs to ensure the printer is available after a network is restarted.

Which of the following should the technician set up on the printer to meet this requirement?

23. A user cannot see the office multifunction printer in their laptop's print options. They have printed to the device in the past successfully. The user's laptop is connected to the guest wireless network. Other users on both wireless and wired computers can see and print to the printer.

Which of the following will fix the issue?

24. A technician needs to prepare a conference room for a meeting. The technician connects the laptop to the LCD projector and audio system, and then verifies the connectivity of each device. The meeting begins, but the visual presentation suddenly cuts off 30 minutes later. The audio continues to play without interruption. The technician brings in a backup laptop and connects it to the projector. The meeting continues without issue for 15 minutes until the presentation suddenly cuts off again.

Which of the following should the technician do to resolve this issue?

25. Which of the following devices is designed to monitor and filter incoming and outgoing network traffic?

26. A user joins a conference call with a Bluetooth headset.

Which of the following has the user created?

A. MAN

B. PAN

C. SAN

D. WAN

27. Which of the following types of RAM would most likely be used in a server?

28. Which of the following has the best penetration through physical objects, such as walls?

29. Which of the following display technologies typically provides the highest contrast?

30. A financial institution needs a secure way to protect encryption keys used for unlocking chips on its credit cards.

Which of the following should the institution use?

31. Which of the following internet connection types provides the fastest speeds and greatest coverage in less populated areas with minimal infrastructure?

32. Which of the following DNS records would an administrator change to redirect email flow?

33. A multifunction printer in a small office recently had issues with scan-to-email functionality. The manufacturer has an update ready to fix the printer issues.

Which of the following would a technician most likely deploy to remediate the issue?

34. Which of the following is related to the creation of a secured communication channel between workstations in different locations and is supported by credentials for authentication?

35. A user is unable to access secure applications on their tablet when working from home a couple days per week, but the applications work when in the office.

Which of the following services most likely needs to be reconfigured to allow for remote work?

36. A technician recently updated the firmware on a dual-BIOS motherboard. Following the update, the system has been stuck in a boot loop and cannot start an OS from any internal or external device. The technician cannot access the UEFI menu either.

Which of the following should the technician do next?

37. Which of the following connector types is associated with coaxial terminations serving cable internet deployments?

38. Which of the following types of RAM is typically used in servers?

39. A customer reports their tablet was recently dropped on the ground. The tablet has a small crack in one corner of the display, and it does not charge when plugged in.

Which of the following should a technician do first?

40. A user connects a company-issued laptop to a 4K TV but can only get 1080p resolution on the TV. The technician confirms that the laptop is capable of producing a 4K output.

Which of the following is the most likely cause of the issue?

41. A technician is setting up a new multifunction device to be used over a shared network connection. Copier functions need to be restricted to only office employees.

Which of the following should the technician perform after configuring the device to use a print server that exists on the domain?

42. A user routinely connects and disconnects multiple devices from a laptop.

Which of the following options should a technician recommend to facilitate ease of user mobility?

A. Serial interfaces

B. Docking station

C. Network switch

D. USB hub

43. A customer recently lost data due to several unexpected shutdowns. Data integrity is important to the customer.

Which of the following features should the technician choose to prevent data loss?

44. Which of the following would prevent a virtual machine from communicating with any endpoints on a network or the internet?

45. Which of the following is designed to be used in commercial spaces?

46. A recently installed printer is incorrectly aligning printed documents.

Which of the following should the technician do first to fix this issue?

A. Run the maintenance application.

B. Clean the rollers

C. Upgrade the firmware

D. Reinstall the drivers

47. A small company wants the ability to print in full color but needs to pay a minimal initial purchase price for the printer.

Which of the following is the best option?

48. An end user reports that their laptop has a blank screen. A technician observes the keyboard lights are on, and the fan is running.

Which of the following should the technician do next?

49. Which of the following network services is used to assign an IP address to a network host?

50. An SAS RAID array has severely degraded and gone offline A systems administrator examines the syslog, and the point of failure is not obvious.

Which of the following techniques should the administrator use to identify the issue (Select two).

51. Which of the following cable types can be used to transfer data and video?

52. A technician is troubleshooting internet connectivity issues after a firewall update. Users report that they can access local network resources, such as printers and shares, but cannot access the internet.

Which of the following settings is most likely causing the issue?

53. A customer reports a problem connecting to network resources. After asking open-ended questions, the technician determines the issue likely exists on the remote server.

Which of the following should the technician do next?

54. A user reports slow internet browsing. The technician finds high CPU and memory usage, and pop-ups occur every minute.

Which of the following should the technician do next?

55. Which of the following statements best summarize managed vs unmanaged switches? (Select two).

56. Which of the following allows a physical server to host multiple virtual machines?

57. A technician receives a S.M.A.R.T. error on a PC. When the technician presses the Esc key, the PC continues to turn on without any further issues.

Which of the following should the technician do next?

58. The display in a conference room has a ghost image that does not match the presentation.

Which of the following would test resolve the issue?

A. Adjust the color settings.

B. Correct the keystone.

C. Increase the brightness levels

D. Replace the monitor.

59. An IT specialist sets up a new computer for a user who requires a high-end video card and the fastest hard drive possible.

Which of the following connectors should the specialist verify are available on the motherboard? (Select two).

60. A customer needs to install a new printer in their network. The customer reports that users had intermittent connectivity issues with previous printers.

Which of the following should the technician configure on the new printer to prevent this issue?

61. Which of the following services is used to allocate IP addresses in an enterprise-wide environment?

62. A company migrates a local application to an internal cloud platform.

Which of the following best describes this cloud platform?

63. Which of the following is an advantage of using a hybrid cloud instead of a public cloud?

64. A technician receives a notification after a network outage that indicates the printer is not reachable.

Which of the following printer settings should the technician implement to prevent this issue in the future?

65. Which of the following types of connectors does an IDE hard drive use for power?