NS0-528 Dumps Questions - Effective Way to Get Certified

NS0-528 Dumps Questions – Effective Way to Get Certified

Category:

Comments:

0 Comments

Post Date:

July 18, 2025

If you're in the field of Network Appliance, you know how important it is to stay up-to-date with the latest knowledge and skills to protect your organization's networks and data. One way to do that is by obtaining Network Appliance NCIE-DP Certification, specifically the NS0-528 exam. While preparing for the NS0-528 exam, you might consider using NS0-528 dumps to help you familiarize yourself with the exam format and content. These NS0-528 exam dumps questions can be an effective way to gauge your knowledge and identify areas where you may need additional study. Study online free NS0-528 exam dumps below.

Page 1 of 7

1. Due to legal compliance requirements, a financial institution needs to store and commit files to a non-erasable, non-rewritable state either forever or for a designated retention period.

In this scenario, which ONTAP feature will satisfy these requirements?

FlexClone

SnapLock

SnapDiff

Snapshot

2. An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primary cluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3

3. What is a SVM in NetApp ONTAP?

A storage virtual machine that provides access to storage resources

A compressed volume that takes up less storage space

A volume that is encrypted to protect data

A volume that is optimized for data access speed

4. A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.

Which SnapMirror policy andrelationship type should be used?

Mirror And Vault/Relationship Type XDP

Mirror And Vault/Relationship Type TDP

Mirror And Vault/Relationship Type LS

Mirror And Vault/Relationship Type DP

5. A customer has deployed an 8-Node Fabric MetroCluster solution.

In this scenario, what information is replicated by the Configuration Replication Service (CRS) in ONTAP 9.3? (Choose two.)

disk assignments

user created job schedules

SVM configuration

IPspaces

6. You want to replicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault). To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.

Which product would accomplish this task?

OnCommand Unified Manager

OnCommand System Manager

OnCommand Insight

Commvault IntelliSnap

7. A customer is planning the cloud strategy for their Microsoft SQL databases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.

In this scenario, which two products are required to satisfy their backup management needs? (Choose two.)

FlashPool

SnapCenter

CloudSync

Cloud Volumes ONTAP

8. A customer must protect an ONTAP Select cluster at remote locations. They have a very limited network connection between sites for 30 remote locations and the data center. They want to be able to recover a remote site with an RPO of 60 minutes.

In this scenario, which solution accomplishes this task?

SnapVault

MetroCluster

SnapMirror Synchronous

FlexClone

9. Click the Exhibit button.

You have been receiving the lag status error notifications shown in the exhibit.

What must you do to correct this problem?

Fan out the relationship.

Add a schedule to the relationship.

Quiesce the relationship.

Resynchronize the relationship.

10. Your company reports that a volume was corrupted at 8 a.m. on April 28th.

Referring to the exhibit, which Snapshot copy should be used for the restore?

~hourly.2020-04-28_0905~

~hourly.2020-04-28_0705~

~hourly.2020-04-28_0805~

~daily.2020-04-28_0010~

Page 2 of 7

11. A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.

In this scenario, what would you do to reestablish the storage failover capability on your cluster?

Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.

Deploy two single-node ONTAP Select clusters and migrate all exiting data.

Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.

Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.

12. What does the metrocluster configuration-settings interface create command do?

It creates a MetroCluster local cluster IS

It creates a MetroCluster local cluster interconnect.

It creates a MetroCluster intercluster LI

It creates a MetroCluster MCCIP interface.

13. You are the administrator of your company’s ONTAP clusters. You are asked to provide a disaster recovery solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible availability at the lowest possible price.

In this scenario, which product will satisfy this requirement?

MetroCluster

SM-S

SnapMirror

SVM-DR

14. Exhibit:

A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protection section, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.

Referring to the exhibit, which volume has a lag that exceeds the company policy?

svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_dest

svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_DR

svm_fabricpool:project_b -> svm_fabricpool:project_b_dest

svm_fabricpool:project_a -> svm_fabricpool:project_a_dest

15. You are asked to verify that data stored in your disaster recovery site can be restored and is viable. Currently, you have a NetApp SnapMirror relationship with a MirrorAllSnaps policy type that is enabled and is updating frequently.

What would be a nondisruptive method to carry out a detailed validation of your disaster-recovery strategy?

Use SyncMirror on the destination aggregate on the destination cluster, and validate the data.

Perform a SnapMirror reverse resynchronization to restore the data from the destination cluster to the source cluster, and validate the data.

Break the SnapMirrorrelationship and validate the data.

Create a FlexClone volume of the destination volume on the destination cluster, and validate the data.

16. You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.

Which two actions mustbe performed for the SnapMirror relationships? (Choose two.)

Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.

Delete and re-create SnapMirror relationships.

After the upgrade, resynchronize, and resume SnapMirror relationships.

Break existing SnapMirror relationships.

17. What is MetroCluster in NetApp ONTAP?

A high-availability solution that provides synchronous data replication between two clusters

A cloud storage solution that provides backup and recovery services

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

18. You are the administrator of an ONTAP cluster, where the majority of users are using Linux machines with home directories mounted using NFS. You keep six daily, four weekly, and one monthly Snapshot copy locally. However, you do not replicate the data to another instance of ONTAP. One of your users reports having accidentally deleted a file, but does not remember the self-serve restore procedure.

How does the user restore the file without having administrator privileges on the cluster?

Issue the snapshot restore-file command.

Using ONTAP System Manager, restore the volume from a Snapshot copy.

Copy the deletedfile from the .snapshot directory.

Issue the volume snapshot restore command.

19. What is SnapVault in NetApp ONTAP?

A method for backing up data to a secondary storage system

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

A method for synchronizing data between systems

20. What are the key factors to consider when designing a data protection solution?

Data type, data volume, and data location

Data location, data protection regulations, and data storage technology

Data sensitivity, data encryption, and data retention policy

Data backup frequency, data retention policy, and data storage technology

Page 3 of 7

21. You are asked to perform a NetApp Snapshot copy single-file restore on a corrupted thin-provisioned LUN that is 10 GB in size and is currently at 80% full.

How much additionalfree space do you need in the volume to perform this operation?

16 GB

20 GB

8 GB

10 GB

22. What is a backup retention policy in NetApp data protection software?

A set of rules for determining how long backups are kept

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

A method for optimizing data access

23. How can you ensure data integrity in a data protection solution?

By using data redundancy

By using data deduplication

By implementing data validation checks

By using data compression

24. You are asked to create application-consistent Snapshot copies of VM guests that are running in your VMware environment that have datastores from an ONTAP 9.8 AFF cluster.

What is required to accomplish this task?

Virtual Storage Console

SnapCenter Software

ONTAP System Manager

Active IQ Unified Manager

25. What is a Snapshot in NetApp ONTAP?

A backup method that captures the entire state of a system at a specific point in time

A file-level backup method that only backs up changed files

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

26. What is the purpose of NetApp ONTAP Business Continuity Solutions?

To ensure high availability and fast disaster recovery

To optimize data access speed

To compress data to reduce storage space

To encrypt data to protect it from unauthorized access

27. A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes with LUNs for a 10 TB Oracle database.

Which two tools would accomplish this task? (Choose two.)

SnapCenter Plug-in for Oracle Database

OnCommand Insight

ONTAP System Manager

Active IQ Unified Manager

28. A customer is running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore - file-list.

Which two statements are true about this operation? (Choose two.)

You can choose any destination volume for the restore, as long as the volume type is R

You can choose any destination volume for the restore, as long as the volume type is D

The maximum number of files that you can select at the same time is one.

The maximum number of files that you can select at the same time is eight.

29. You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get thenode booted up again, but are unable to perform the giveback operation.

The onscreen error is:

"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks"

What are two ways to solve this problem? (Choose two.)

Correct the failover group configuration.

Correct the shelf cabling errors.

Destroy the root aggregate.

Destroy the mailboxes on both nodes.

30. Using ONTAP System Manager, you are asked to replicate all the volumes contained in a Storage VM to a remote ONTAP 9.7 system for quick disaster recovery.

Which two steps need to be completed to accomplish this task? (Choose two.)

Create a SnapMirror relationship for each volume.

Create a cluster peering relationship.

Create an SVM-DR relationship.

Create an SVM peering relationship.

Page 4 of 7

31. Exhibit:

Using the NetApp Cloud TCO calculator, a customer wants to determine whether running Cloud Volumes ONTAP in Azure will be more cost effective than running native cloud services.

Referring to the exhibit, which action would satisfy the requirement?

Turn off High Availability.

Change the Azure VM Type to DS3_V2.

Turn on Tier to Azure Blob.

Change the Azure VM Type to DS14_V2.

32. You asked a colleague tocreate a new SnapMirror replication relationship of type “Vault” between two SVMs on separate clusters. You want to verify that the SVMs are healthy and updating on a particular schedule.

What are two ways to accomplish this task? (Choose two.)

Use OnCommand System Manager on the source cluster for verification.

Use OnCommand System Manager on the destination cluster for verification.

Use the ONTAP CLI on the destination cluster and issue the snapmirror show Cfields healthy, schedule command.

Use the ONTAP CLI on the source cluster and issue the snapmirror show Cfields healthy, schedule command.

33. You are maintaining a 4-node MetroCluster.

How are the high-availability interconnects cabled?

High-availability interconects between the nodes are not needed.

Each high-availability pair controller is cabled to its localpartner.

High-availability interconnects are only needed for the remote connections between the nodes.

High-availability interconnects are cabled both locally and remotely between the nodes.

34. Which two policy types provide asynchronous replication? (Choose two.)

hourly

mirror-vault

vault

daily

35. Exhibit:

A customer wants to have a local mirror and a remote mirror of their data.

Referring to the exhibit, which two solutions satisfy these requirements? (Choose two.)

Solution I

Solution IV

Solution II

Solution III

36. Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment.

Which version of clustered Data ONTAP would you recommend?

clustered Data ONTAP 9.1

clustered Data ONTAP 8.2.3

clustered Data ONTAP 8.3

clustered Data ONTAP 8.1.4

37. You are asked to implement a DR solution to protect employee home directories on the primary cluster. The solution should provide an PRO of one hour, disaster recovery and archiving configured on the same destination volume of the DR cluster. Your solution should also reduce the amount of secondary storage requirements and use lower network traffic on the WAN links.

In this scenario, which NetApp replication technology satisfies these requirements?

SnapMirror-Sync

SyncMirror

MetroCluster

SnapMirror

38. You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.

Which two statementsare correct about enabling this feature? (Choose two.)

The data is compressed only while it traverses the network.

You may only enable SnapMirror network compression on one HApair in a cluster, and traffic 1-1 is limited to routing through those nodes.

The data transfer between the clusters must use the NDMP protocol.

The compression engine creates multiple transfer threads corresponding to the number of CPUs on the source storage system.

39. Using SnapCenter 4.0, you are restoring a virtual machine.

Which additional tool would be used to monitor the restore?

VMware vSphere Web client

OnCommand System Manager

OnCommand Unified Manager

Virtual Storage Console

40. A customer has a MetroCluster configuration and wants to automate the disaster recovery process for unplanned automatic switchover.

Which NetApp tool would accomplish this task?

ONTAP System Manager

SnapCenter

ONTAP Mediator

Active IQ Unified Manager

Page 5 of 7

41. A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.

How do you make this change in ONTAP?

Restart the NDMP service on the cluster.

Restart the NDMP service on the SVMs being backed up.

Turn off node-scoped NDMP on the SVMs being backed up.

Turn off node-scoped NDMP on the cluster.

42. A customer that is running 100% SAN workloads wants to begin tiering cold data from their AFF ONTAP-based systems using a FabricPool.

Using NetApp best practices, what should be configured to accomplish this task?

Azure cool Blob storage

NetApp StorageGRID

Amazon S3 Glacier

NetApp Element

43. During NDMP incremental backups, you want to reduce the time spent finding the changed data between two Snapshot copies.

In this scenario, which ONTAP feature will accomplish this task?

compaction

deduplication

SnapDiff

SnapLock

44. A user has a NAS volume backed up with NetApp Snapshot copies. They have a large important database file that has been locked by a ransomware attack. The rest of the files on the volume seem completely fine so they only need to be able to restore this specific database. They are currently unable to restore this file, because of a lack of free space in the volume.

In this scenario, which action would allow the client to restore the file to a known good condition?

Expand the FlexVol, then perform a single file SnapRestore.

Expand the Aggregate, then perform a single file SnapRestore.

Create a FlexClone from a Snapshot copy, and manually copy the file back over the original.

Enable Autogrow on the volume, and perform a full SnapRestore.

45. You are planning on archiving 200 TB of data with SnapVault to an ONTAP Cloud Instance.

Which NetApp tool manages your Bring Your Own License (BYOL)?

OnCommand System Manager

OnCommand Unified Manager

OnCommand Cloud Manager

OnCommand Insight

46. You are administering your company's ONTAP SMB file services. You must perform a Snapshot copy every hour and replicate the Snapshot copy to a secondary ONTAP cluster.

Which two software products would you use to initialize the replication relationship? (Choose two.)

Active IQ OneCollect

ONTAP System Manager

SnapCenter

Active IQ Unified Manager

47. What is SVM-DR in NetApp ONTAP?

A solution for replicating data between SVMs within the same cluster or between clusters

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

A method for optimizing data access

48. When installing a new AFF A700s, you notice that the HA interconnect adapters use miniSAS HD. You subsequently consult Hardware Universe to find out that only 0.5M cables are supported. Due to the importance of the system data fields that use this link, you delay the installation until you can acquire 0.5M cables.

In this scenario, which two system data fields are communicated between HA pairs over the interconnect adapters? (Choose two.)

NVRAM mirroring

heartbeat signal

intercluster peering

data LIF location

49. Exhibit:

Commvault IntelliSnap and NetApp SnapCenter are both being used to back up the same Microsoft SQL Server database.

Referring to the exhibit, which action will SnapCenter perform on the Microsoft SQL transaction logs?

move

delete

truncate

keep

50. You want to use SnapCenter to restore an MS SQL database on iSCSI LUNs from a previous application-consistent snapshot.

In this scenario, what is required to accomplish this task?

Confirm multipathing for iSCSI is enabled on the host.

Confirm that the database server is running on the host.

Confirm that the database server is not running on the host.

Confirm that the iSCSI service is disabled on the host.

Page 6 of 7

51. What is a disaster recovery plan in NetApp data protection software?

A set of procedures for recovering data after a disaster

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

A method for optimizing data access

52. Which two types of volumes support NDMP backup? (Choose two.)

FlexCache

Flash Pool

FlexVol

FlexGroup

53. Exhibit:

Referring to the exhibit, You have a MetroCluster IP solution that uses Cisco Nexus 3232C back-end switches for a maximum ISL distance of 700 km.

What is the maximum round trip ISL latency that is supported in this scenario?

7 ms

10 ms

14 ms

20 ms

54. When volumes are set to be thin-provisioned, what must be monitored for space usage?

Snapshot reserve

aggregate

volume clone space

LUN

55. When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow?

largest to smallest

alphabetically A-to-Z

left to right, top to bottom

numerically 1-to-999

56. What is the purpose of a Snapshot in NetApp ONTAP?

To provide an easy and fast way to restore data

To provide a way to delete unwanted data

To provide a way to compress data

To provide a way to encrypt data

57. You are supporting an environment that performs SnapMirror transfers multiple times a day to ensure a very low RPO. The source and destination storage systems are both located on your campus. When these scheduled mirrors begin, users complain that the network performance on campus suffers.

In this scenario, what would you do to limit disruption to the network?

Set the schedule of the SnapMirror updates to run only late at night.

Enable deduplication on the SnapMirror destination storage volume.

Set a global network throttle for SnapMirror on each node in the cluster.

Set a QoS level for the intercluster LI

58. What is a backup schedule in NetApp data protection software?

A set of rules for determining when backups occur

A method for compressing data to reduce storage space

A method for encrypting data to protect it from unauthorized access

A method for optimizing data access

59. You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.

In thisscenario, which feature satisfies this requirement?

Inactive Data Reporting

Information Lifecycle Management

Object Store Profiler

Auto Balance

60. Exhibit:

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test the disaster recovery workflow in an upcoming maintenance window.

Referring to the exhibit, which step should be performed next to test the recovery workflow?

Delete the SVM-DR relationship.

Pause any ongoing transfers.

Abort any ongoing transfers.

Update any ongoing transfers.

Page 7 of 7

61. 1.What is a FlexVol in NetApp ONTAP?

A flexible volume that can be expanded or contracted as needed

A compressed volume that takes up less storage space

A volume that is encrypted to protect data

A volume that is optimized for data access speed

62. Synchronous replication is available for which two NetApp solutions? (Choose two.)

ONTAP Select

StorageGRID Webscale

MetroCluster

Cloud Backup

63. A storage system is running low on space, and you enable a Snapshot autodelete policy on a volume. You need to replicate Snapshot copies to another storage system before they are deleted.

Which two SnapMirror policies would retain the deleted Snapshot copies? (Choose two.)

MirrorLatest

MirrorAndVault

XDPDefault

MirrorAllSnapshots

64. Exhibit:

You are asked to restore a volume with a Snapshot copy from last month. The administrator noticed that there are only three weeks of snapshots, even though the retention is set to one year.

Referring to the exhibit, what would be the reason for this result?

Snapshots were transferred by SnapMirror.

Snapshot Autodelete is enabled.

The Fabric Pool tiering policy is set to Snapshot only.

Volume autosize is set to grow or shrink.

65. You are asked to enable WORM technology on a large amount of legal data. The legal team asks that a designated user group have the ability to delete files as needed.

What would satisfy the legal team's requirements?

SnapLock Enterprise

SnapVault

SnapCenter Plug-in for Microsoft SQL Server

SnapLock Compliance

TAGS:

NS0-528, NS0-528 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get NS0-528 Dumps Full Version

Q&As: 215
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

NS0-528 Dumps Questions – Effective Way to Get Certified

Related

Posts

Online NS0-521 Exam Dumps Help You Build Confidence

Network Appliance NS0-163 Exam Questions Simulate Actual NS0-163 Exam

Test Online NS0-700 Dumps Questions to Be Certified

Test Online NS0-404 Dumps Questions to Be Certified

About Us

EMAIL

Services

Opening Hours