2V0-17.25 Dumps Guarantee You Pass 2V0-17.25 Exam Easily

1. A VI Administrator is connecting a new workload domain cluster to an existing VCF instance. The company's policy dictates that supplemental storage for a specific application must be provided from a pre-existing enterprise Fibre Channel (FC) array.

The administrator has successfully zoned the FC SAN fabric and presented the LUNs to the ESXi hosts in the new workload domain. However, the LUNs are not visible as datastores in vCenter.

- vCenter Server -> Host -> Configure -> Storage Adapters -

Adapter: vmhba2 (Emulex LPe35002)

Status: Online

LUNs: 0

Paths: 0

Devices: 0

- SAN Switch Zoning Configuration -

zone name Z_VCF_PROD_APP server_wwn 20:00:00:xx:xx:xx:xx:01; storage_wwn 50:00:00:yy:yy:yy:yy:01

After verifying physical connectivity and zoning, which are the most likely reasons the LUNs are not visible to the ESXi hosts? (Select all that apply.)

2. A Security Administrator and a VI Administrator are collaborating on the design of a new VMware Cloud Foundation instance that must comply with strict corporate security policies. A key requirement is that all management components must use certificates signed by the organization's internal Public Key Infrastructure (PKI). The deployment will be performed using the VCF Installer.

To ensure a smooth transition from the default self-signed certificates to the corporate CA-signed certificates after the initial bring-up, which planning and configuration steps are most critical? (Select all that apply.)

3. In a VMware Cloud Foundation 9.0 architecture, which new component is responsible for integrating with external identity providers like Azure AD or Okta to provide federated authentication and single sign-on (SSO) capabilities?

4. A VCF upgrade process has been running for several hours, upgrading the ESXi hosts in a large workload domain one by one. A Platform Operator wants to check the detailed, real-time progress of the host currently being upgraded. The SDDC Manager UI shows that host `esx-wld-fin-07.corp.local` is "In Progress".

Where should the operator look to find the most granular, step-by-step logging of the ESXi host upgrade process as it happens? (Select all that apply.)

5. When troubleshooting a VMware Cloud Foundation environment, which component serves as the central point for viewing aggregated logs, running health checks, and accessing diagnostic utilities like the SoS tool?

6. A VI Administrator is in the process of installing a new CA-signed certificate for vCenter Server using the VCF Operations UI. The process fails, and the administrator reviews the SDDC Manager `vcf-domain-manager.log`.

The log shows the following error during the "Install Certificate" task:

- Domain Manager Log -

...

[2025-09-27 15:10:00] INFO: Attempting to install new certificate for component VC_MANAGEMENT.

...

[2025-09-27 15:10:05] ERROR: Certificate installation failed.

com.vmware.vcf.certmanager.common.CertificateValidationException: Certificate chain is incomplete.

The provided certificate chain file does not include the intermediate CA certificate that issued the server certificate.

Please provide a complete, ordered chain: Server Cert -> Intermediate CA Cert -> Root CA Cert.

What is the cause of the failure?

7. A VI Administrator is configuring the scheduled backups for the SDDC Manager appliance. The company's disaster recovery policy requires backups to be stored on a remote, dedicated backup server.

The administrator navigates to the backup configuration page in the VCF Operations UI and is presented with the following fields:

- Backup Configuration -

[X] Enable Scheduled Backups

Schedule: Daily at 02:00 AM

Backup Location:

- Protocol: [ Dropdown: NFS, SFTP ]

- FQDN or IP: _________________

- Path: _________________

Credentials:

- Username: _________________

- Password: _________________

The administrator has been given the details for an SFTP server.

Which information must be provided to successfully configure the backup?

8. A VI Administrator is using the "Enable Supervisor" wizard in vCenter Server for a workload domain cluster. The administrator needs to configure the networking for the Supervisor Control Plane VMs.

The following details have been entered in the wizard:

- Step 2: Network Configuration -

Management Network:

- Starting IP Address: 192.168.150.10

- Subnet Mask: 255.255.255.0

- Gateway: 192.168.150.1

- Primary DNS: 10.0.0.2

Network Provider: NSX

Load Balancer:

[ ] NSX Load Balancer

[X] HA Proxy

Based on this configuration, what additional network information must the administrator provide for the HA Proxy load balancer?

9. A VI Administrator is creating a new Workload Domain and needs to provide storage for VMs with very high I/O and low latency requirements. The hosts are equipped with high-performance NVMe devices. The administrator wants to ensure the storage is configured for maximum performance.

During the Workload Domain creation wizard, the administrator selects vSAN as the storage type. The following options are presented:

- vSAN Architecture Selection -

Select the vSAN architecture for the new cluster:

( ) Original Storage Architecture (OSA)

- Utilizes a two-tier architecture with separate cache and capacity devices.

- Best for mixed flash and magnetic or lower-end all-flash configurations.

(X) Express Storage Architecture (ESA)

- Utilizes a single-tier architecture with NVMe devices for both cache and capacity.

- Designed for high-performance, all-NVMe hardware.

Why is selecting Express Storage Architecture (ESA) the correct choice to meet the performance requirements?

10. A VI Administrator has successfully deployed a new workload domain. Several days later, vSAN health alerts appear for the cluster in that domain. The administrator investigates and finds the following alert:

vSAN Health - Network

Test: vSAN: Basic (unicast) connectivity check

Status: Failed

Hosts with connectivity issues:

- esx-wld02-03.corp.local

- esx-wld02-04.corp.local

Details:

Failed to test unicast connectivity between host esx-wld02-01.corp.local and host esx-wld02-03.corp.local.

Failed to test unicast connectivity between host esx-wld02-02.corp.local and host esx-wld02-04.corp.local.

Subnet mismatch detected for vSAN vmknics.

Based on this vSAN health alert, what is the most probable cause of the issue?

11. A Platform Operator is scheduling an upgrade for a production Workload Domain. To minimize application downtime, the operator plans to leverage the automated, rolling upgrade process managed by SDDC Manager.

The Workload Domain cluster has the following configuration:

- Cluster: wld-prod-01-cluster

- Number of Hosts: 5

- vSphere DRS: Fully Automated

- vSphere HA: Enabled

- vSAN Storage Policy (Default): FTT=1 (RAID-1 Mirroring)

During the ESXi host upgrade phase, what sequence of actions will SDDC Manager orchestrate for each host in the cluster?

12. A Platform Operator is designing a highly available vSphere Supervisor deployment that will span two availability zones (AZs) within a single VCF instance. The workload domain is a vSAN Stretched Cluster. The goal is to ensure the Supervisor control plane remains operational even if one entire AZ fails.

The Supervisor configuration wizard presents the following options for control plane node placement:

- Supervisor Control Plane Layout -

Deployment Type: Stretched Cluster (AZ-1, AZ-2)

Node Placement Options:

- Option A: Place all 3 control plane nodes in AZ-1.

- Option B: Place 2 control plane nodes in AZ-1 and 1 node in AZ-2.

- Option C: Place 1 control plane node in AZ-1, 1 node in AZ-2, and 1 node in the Witness site.

- Option D: Place 1 control plane node in AZ-1, 1 node in AZ-2, and the third node's VM files will be hosted by the Witness but the VM will run in AZ-1.

Which placement strategy must the operator choose to meet the high availability requirement?

13. When preparing to upgrade a VMware Cloud Foundation instance, what is the correct sequence in which the primary domains are typically upgraded by the SDDC Manager's Lifecycle Management (LCM) service?

14. An automated backup of the SDDC Manager has failed. A Platform Operator reviews the task details in the VCF Operations UI to diagnose the problem.

The task failure log displays the following error:

- Task: Perform SDDC Manager Backup -

Status: FAILED

Details:

- Backup process initiated to SFTP server: sftp://backupsrv01.corp.local/vcf-backups/

- SSH connection to backupsrv01.corp.local established successfully.

- Authentication with user 'vcf-backup-acct' succeeded.

- FAILED to write backup file to target directory '/vcf-backups/'.

- SFTP server response: 'Permission denied'.

- Please verify the file system permissions for the user on the target backup server.

Based on this log, what is the most likely cause of the failure?

15. What is the primary role of the vSphere Supervisor in a VMware Cloud Foundation workload domain?

16. A Platform Operator is preparing to upgrade a VMware Cloud Foundation instance. The operator navigates to the Lifecycle Management section of the SDDC Manager UI to view available updates.

The following information is displayed:

- Updates / Patches -

Product: VMware Cloud Foundation

Current Version: 9.0.0

Available Updates:

[ Update Bundle: VCF-9.0.1 ]

Version: 9.0.1

Type: UPDATE

Release Date: 2025-09-15

Includes: Security patches and stability improvements for SDDC Manager, vCenter, and NSX.

Actions:

[ View Details ] [ Run Precheck ] [ Schedule Update... ]

Before applying the update bundle, which action must the operator perform first to ensure the environment is ready for the upgrade?

17. A Security Administrator needs to comply with a new corporate policy that requires the password for the `admin@local` user to be rotated every 90 days. The administrator needs to perform this rotation.

The administrator logs into the VCF Operations UI and sees the following options in the security section:

- Security Management -

[ Certificate Management ]

- Generate CSRs

- Install Certificates

[ Password Management ]

- Update Passwords

- View Password Policy

[ User Management ]

- VCF Local Users

- Identity Provider

Which is the correct sequence of actions to rotate the password for the `admin@local` account?

18. A Solutions Architect is designing the networking for a new VCF instance. The design requires logical separation of different traffic types for security and performance reasons. The Planning and Preparation Workbook is being used.

The design calls for the following networks on the vSphere Distributed Switch (VDS) for the management domain:

- Management Network

- vSAN Network

- vMotion Network

- Host Overlay Network

Which two of these traffic types are the most foundational, requiring their own dedicated VMkernel adapters on each ESXi host for the VCF management domain to be deployed and function? (Choose 2.)

19. A Cloud Administrator is performing an upgrade of a workload domain, but the LCM precheck fails. The administrator reviews the validation report from SDDC Manager.

The report shows the following failure detail:

- Precheck Validation Report -

Domain: wld-finance-01

Validation Check: vSAN Cluster Health

Status: FAILED

Details:

- vSAN health check 'vSAN: All hosts have a vSAN vmknic configured' has failed.

- Host 'esx-fin-04.corp.local' is missing a vmkernel adapter with the 'vsan' traffic type enabled.

- Remediation: Please configure a vSAN vmkernel adapter on the affected host and re-run the precheck.

Based on this report, what is the direct cause of the precheck failure?

20. A VI Administrator is facing a critical production issue. A workload domain deployment has failed, and an LCM upgrade precheck is also failing with vSAN health errors. The administrator has collected an SoS log bundle from SDDC Manager. Simultaneously, a Network Administrator is investigating a separate issue where newly deployed VMs cannot access the corporate DNS servers, and they suspect an NSX firewall issue.

To resolve these issues efficiently, which troubleshooting actions should be taken by the respective administrators? (Select all that apply.)

21. A Solutions Architect is designing a multi-instance VMware Cloud Foundation environment that will span three different geographical regions. The primary requirement is to have a single, unified interface to view the health, inventory, and lifecycle management status of all three VCF instances.

The proposed high-level architecture includes the following:

- Region A: VCF Instance 1 (vcf-us-east)

- 1x Management Domain

- 4x Workload Domains

- Region B: VCF Instance 2 (vcf-eu-west)

- 1x Management Domain

- 2x Workload Domains

- Region C: VCF Instance 3 (vcf-apj-south)

- 1x Management Domain

- 3x Workload Domains

Which VCF 9.0 component should be deployed to meet the unified management requirement?