Get Certified Easily with Online D-VXR-DY-23 Dumps

Category:

Comments:

0 Comments

Post Date:

February 8, 2024

Using Dell Technologies VxRail Deploy 2023 D-VXR-DY-23 questions can help you build confidence as you prepare for the exam. By practicing with these D-VXR-DY-23 dumps questions, you will be better prepared and more confident when you take the actual exam. Besides, D-VXR-DY-23 exam dumps questions cover a wide range of topics that are relevant to the certification exam. By using D-VXR-DY-23 dumps questions, you will be able to ensure that you have a comprehensive understanding of the material covered on the exam. Practice free DELL EMC D-VXR-DY-23 exam dumps below.

Page 1 of 11

1. How must node ports on Dell EMC ToR switches be configured when the Spanning Tree Protocol is enabled in an environment?

In Port-Channel mode

In Forwarding status

As edge ports

As access ports

2. When adding an S Series node to a Gen 2 VxRail 240F cluster the build fails.

What could be a possible cause of this situation?

IP Pool has no more free addresses

Hybrid and Flash nodes cannot be mixed in the same cluster

Quanta and Dell hardware cannot be mixed in the same cluster

Loudmouth process needs to be restarted

3. To investigate a problem on a VxRail system, the onsite engineer has to collect the complete set of logs.

Which method will collect all logs at once?

Download https://:443/appliance /support-bundle

Export vCenter system logs

Run /mystic/generateFullLogBundle command in VxRail Manager CLI

Click "Generate New Log Bundle" in the VxRail Manager GUI

4. A company has indicated that they do not want to change the native VLAN for their entire switch.

Based on best practice, how should the Top of Rack (ToR) switch be configured?

Set the native VLAN on the switch ISL ports

The native VLAN for the switch must be set

Set the native VLAN only at the VxRail trunk ports

Do not configure ToR switch native VLAN and instead tag the VLAN on VxRail

5. What is the maximum number of nodes in a VxRail cluster when using 1 GbE links?

6. What is the minimum configuration for a vSAN Stretched Cluster?

1+1 nodes and a witness

1+1 nodes and no witness

3+3 nodes and a witness

3+3 nodes and no witness

7. Refer to the exhibit.

You have received the attached PEQ for an upcoming VxRail implementation. However, you have no additional supporting documents.

Who should be your first point of contact for additional information?

Solutions Architect

Project Manager

Customer

Systems Engineer

8. In a VxRail deployment with an external vCenter Server, which VMware component(s) is automatically licensed?

vCenter and vSphere only

vSAN only

vCenter, vSAN, and vSphere

vCenter and vSAN only

9. What step is a best practice in the deployment process of a VxRail Appliance with an External vCenter server?

SSH to the default IP address of the VxRail Manager VM to set the required IP address

Create VxRail Management user in SSO with administrative privileges

Create VxRail Configuration user in SSO with no role assigned

Connect to DCUI to set vLAN tagging on ESXi hosts

10. The vSAN Health Check of a VxRail cluster is reporting errors about the stats.db object.

What could be a possible cause of this problem?

vSAN Health Service is disabled

vSAN Performance Service is not enabled

vSAN Performance Service is not enabled on one of the ESX nodes

There are inaccessible/unhealthy vSAN objects

Page 2 of 11

11. An implementation engineer is planning to deploy a new VxRail cluster.

How long is the evaluation period for vSphere licensing on each node?

90 days after nodes are powered on

60 days after nodes are powered on

60 days after nodes are delivered

90 days after nodes are delivered

12. A failure occurs during the deployment of a VxRail cluster. You need to look through the marvin.log file to see what could be causing the error.

Where is this file located?

var/log/vmware/marvin

var/log/vmware

var/log/vmware/marvin/tomcat/logs

var/log/mystic

13. What must be used when deploying VxRail with a customer-supplied VDS?

Deployment Wizard using the configuration file method

Deployment Wizard using the step-by-step method

VxRail API with configuration file

VxRail PowerShell SysBringUp Module

14. An implementation engineer is logged into the vSphere Client of a recently deployed VxRail cluster. They want to review the versions of all the installed VxRail software components.

Which view should they use to gather this information?

Host and Clusters > VxRail Cluster > Configure > VxRail > Updates

Host and Clusters > VxRail Cluster > Configure > VxRail > System

Menu > Administration > Solutions > Client Plugins

Hosts and Clusters > VxRail Cluster > Monitor > VxRail > Appliances

15. What is the size of the drives on the BOSS card in a VxRail P570 node?

64 GB

120 GB

240 GB

256 GB

16. A Secure Remote Services deployment on a VxRail system with external vCenter fails with Invalid target datastore specified.

What action is required to resolve this problem?

Ensure DNS is able to resolve the SRS/VE VM hostname

Retry the deployment through the retry button

Manually deploy Secure Remote Services

Restart vCenter services and retry the deployment

17. Which two vSAN licenses include entitlement for VMware HCI Mesh? (Select 2)

Standard

Enterprise

Enterprise Plus

Advanced

18. What is a requirement for the vSAN Data-at-Rest Encryption?

All-Flash or AII-NVMe VxRail

VxRail with at least 3 nodes

External Key Management Server

External customer provided vCenter

19. A company is planning to deploy their Virtual Desktop Infrastructure on VxRail. The solution should support 2D and 3D high end visualization.

Which VxRail license is required for this solution?

vSphere Enterprise Plus

vSphere with Operations Management Enterprise

vSphere Enterprise

vSphere Standard

20. You are designing a VxRail Stretched Cluster for a company with two datacenters. The primary datacenter will host all the workloads; the secondary datacenter will be for disaster recovery.

Where should you host the witness virtual appliance?

Both datacenters

Secondary datacenter only

Primary datacenter only

Cloud

Page 3 of 11

21. Which activities must be completed as part of VxRail hardware installation?

Verify the time setting on each node before the first-run process Verify existence of PSNT in the DCUI Confirm that the Port Group VLAN IDs are configured as intended

Verify existence of PSNT in the DCUI Configure and use the default management network VLAN IDs Confirm that the Port Group VLAN IDs are configured as intended

Configure iDRAC for remote accessibility to perform out of band system Modify and configure the default management network VLAN IDs Confirm that the external management VLAN ID is tagged

Confirm that the external management VLAN ID is tagged Configure iDRAC for remote accessibility to perform out of band system Verify the time setting on each node before the first-run process

22. You are demonstrating maintenance features on a new VxRail Cluster.

What is a recommended Dell EMC method for replacing a failed capacity disk?

iDRAC Console > Reboot into PERC controller > Replace Disk > Rebuild

VxRail Manager Plug-In > Appliance Front View > Replace Disk

vSphere Client > Node > Enter Maintenance Mode > Replace Disk

Hot Swap > vCenter Plug-in > Monitor Rebuild

23. In what range does the VxRail Manager Health indicator show “yellow” for IOPS, CPU, and memory usage?

60% - 80%

70% - 80%

75% - 85%

75% - 95%

24. What network setting is the optional configuration on the port group for a customer-supplied VDS before the VxRail cluster is deployed?

Assign NIC uplinks

Enable and configure NIOC

Configure NIC teaming and failover

Enable NIC teaming and failover

25. What is configured by default during the initial deployment of a VxRail cluster with All-Flash nodes?

AID-1 vSAN storage policy

vSAN Performance Service

RAID-5 vSAN storage policy

vSAN Deduplication and compression

26. What is the correct Use Case for using VxRail-Managed vCenter Server?

Second or subsequent cluster deployments or the first cluster in a multi-cluster deployment.

A stand-alone cluster deployment or the first cluster in a multi-cluster deployment.

When you have a multi-site Stretch Cluster and no witness.

27. For how many days are the vSphere evaluation licenses valid in a new VxRail implementation?

28. While preparing for an onsite visit for an installation of a VxRail cluster, a Dell installation engineer is unable to generate a Restricted Procedure in the SolVe Online portal.

What is the cause?

The SolVe Online portal is viewed as a customer

The engineer has not been approved for VxRail procedures in the SolVe Online portal

SolVe Online portal has not been updated with the latest procedures

29. Which step of the VxRail Initialization wizard may time out if the user does not proceed to the next step within 20 minutes?

Build complete screen

Review expected nodes list

Review and validate

Configuration of the VxRail Manager IP address

30. What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

vCenter Server requires a temporary IP address on a different subnet before the upgrade

VxRail Manager VM must be changed to the default name to avoid an upgrade failure

External vCenter server must be upgraded after the VxRail is upgraded

Secure boot must be enabled on the ESXi hosts for a successful upgrade

Page 4 of 11

31. During deployment of a VxRail E560F cluster the data on the node becomes corrupted due to a misconfiguration.

Which option in the RASR menu should be selected to ensure the quickest restart of the installation?

Install DUPs

Create RASRUSB

Factory Reset

RASR Reset

32. When the Network Services Validation is enabled, what does the VxRail NVT validate?

STP and VLAN configurations

IP address conflicts, NTP, and DNS settings

VLAN configurations, NTP, and DNS settings

VLAN configurations and port mode settings

33. An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible. Use the VxRail simulator to describe why the host is Incompatible. Note: It is necessary to close (x) the simulator window before you can select a response to this question.

Insufficient number of vSphere licenses

Invalid vCenter 5erver license

Firmware of ESXi host needs to be updated

bmc and bios are running older versions

34. After initial installation the vSAN health check is reporting issues.

Which action needs to be taken to correct the vSAN health check error?

Upgrade to the latest version of VxRail.

Upgrade to the latest driver version.

Reset error message to green

Update HCL database and run health check

35. From what location should NVT for VxRail be run?

Jump server on a different network

Workstation on the same network as VxRail Manager

VxRail network Top of Rack switch

Laptop connected to the first VxRail ESXi node

36. A VxRail deployment has just been completed. The vSAN backend IOPS metrics are not available for the cluster.

What is the reason for this issue?

VMware CEIP is unconfigured

vSAN Performance Service is disabled

Data has not been populated

vSAN Support Insight is disabled

37. What accurately describes VxRail G Series nodes?

All nodes in a chassis must be identical.

Different dot releases of the same major release are permitted if in different chassis.

Each chassis must be fully populated.

Hybrid and all-flash nodes are permitted if in different chassis.

38. What is a requirement for Top-of-Rack (ToR) switches when deploying a VxRail cluster?

Must be manufactured by Dell, Cisco, or Brocade

Must support IPv6 Multicast

Must have two switches in the cluster

Must support 25GbE connectivity

39. You want to deploy VxRail, leveraging your existing VMware SSO domain.

What is the recommended method?

Deploy to an External vCenter

Deploy Embedded vCenter with Embedded PSC

Configure Embedded vCenter in Enhanced Linked Mode

Deploy External vCenter with no PSC

40. What is a requirement for Top of Rack (ToR) switch VxRail node ports?

Enable Spanning Tree

Disable IGMP Snooping

Enable IGMP Querier

Disable Link Aggregation

Page 5 of 11

41. When resetting a Dell PowerEdge-based VxRail node to an existing factory image, which boot device should be selected?

BOSS

RASRUSB

SATADOM

IDSDM

42. Match each component of the VxRail HCI System Software to its description.

43. Beginning with VxRail version 4.7, which product license option has changed?

vSAN

Mware Log Insight

vSphere

vCenter

44. What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

FQDN for vCenter Server - Host name for VxRail Manager

Host name for both vCenter Server and for VxRail Manager

FQDN for both vCenter Server and for VxRail Manager

Host name for vCenter Server - FQDN for VxRail Manager

45. A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.

What should the response of the engineer?

Supported by neither the internal vCenter Server nor external vCenter Server

Not supported on VxRail software 7.0.100

Not supported for internal vCenter Server

Only supported on VxRail software 4.7.xxx

46. A BMC interface webpage is reachable but unresponsive.

What should be done to resolve this problem?

NDU to latest bundle of VxRail software

Reboot the node

Reset the BMC through /tmp/vspexblue/bin/ipmitool mc reset cold

Upgrade the BMC firmware

47. What is a valid 2-node VxRail cluster configuration?

2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter

2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter

2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter

2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter

48. What does the VxRail NVT validate on ToR switches?

NTP and DNS settings

VLAN and LACP configurations

VLAN and STP configurations

IP address conflicts and SRS accessibility

49. An implementation engineer is validating a VxRail deployment of six V570F nodes, each with four 10 Gb connections. The VxRail nodes have not been powered on.

Which command should they run to confirm that the Dell EMC ToR switch is configured correctly?

show port-channel summary

show interface status

show lldp neighbors

show running-config

50. During the installation of a new VxRail cluster, where is System Time configured?

System BIOS > Miscellaneous Settings

iDRAC Settings > System Time

System BIOS > System Information

iDRAC Settings > System Profile Settings

Page 6 of 11

51. Match each VxRail data protection solution with its functionality.

52. Where can an administrator find steps to perform a manual verification of the customer network?

Customer Simplified Form

Dell EMC VxRail Network Planning Guide

Dell Technologies SolVe Online

Pre-Engagement Questionnaire (PEQ)

53. Which VxRail Pre-Installation Site Checklist worksheet is auto-populated?

Network Basics

Switch Config Actuals

VxRail Network Configuration

Begin Here

54. You are attempting to reset a single G Series node running 4.0.x code to the factory default. You discover that the configbundle.tgz file is corrupt.

What is the recommended method to recover the node?

Rapid Appliance Self Recovery

Node Replacement

Mobile Build Server

Reset Script

55. A company has multiple VxRail systems installed at geographically dispersed data centers They want to upgrade all their VxRail systems to the latest release- Before the upgrade, they want an inventory report of all the VxRail systems which shows the current health status and versions of all installed VxRail components.

What should be used to meet these requirements?

itrend Live Optics

VxRail Plugin for vCenter Server VxRail API

VxRail Plugin for vCenter Server DRM Services

Mitrend VxRail Log insight

56. How does the Network Validation Tool (NVT) validate Top of Rack (ToR) switch configurations?

NVT requires switch logon information and parses through the running-config of the switch

Using the switch grab batch file, the output is imported into the NVT User Interface

The running-config is imported into the NVT User Interface

Top of Rack switches are always manually validated prior to implementation

57. What is the function of Witness Traffic Separation in a VxRail Stretched Cluster?

Splits the traffic to enable an offsite backup of virtual machines

Separates the witness traffic from the customer management VLAN

Separates the witness traffic from the vSAN backend VLAN

Splits the traffic to provide an additional layer of redundancy

58. Due to limitations in data center power at the primary site, an asymmetrical VxRail Stretched Cluster has been deployed. Site 1 contains 12 hosts, Site 2 contains 16 hosts, and the Witness Host is in the third site. The administrator has configured affinity rules to run the heavier workloads in Site 2.

What vSAN storage policy settings should be used to ensure adequate workload distribution and data redundancy between sites?

None - keep data on Non-Preferred (stretched cluster) 1 failure - RAID-1 (Mirroring)

Dual site mirroring (stretched cluster) 2 failures - RAID-1 (Mirroring)

None - keep data on Non-Preferred (stretched cluster) No Data Redundancy

None - stretched cluster No Data Redundancy

59. Where can you directly obtain the latest version of the VxRail Appliance PEQ and PEQ Addendum?

Solve Desktop Embedded within

https://elabadvisor.psapps.emc.com/licensedtools/download

https://dell.com/support

Solve Online

60. What is a consideration for using link aggregation on the Top of Rack (ToR) switch for a VxRail?

Should not be used for VxRail node ports, but can be used for uplink and ISL

Is not supported on the VxRail ToR switch

Can be configured for any connectivity, but are not required

Should always be configured for VxRail node ports to allow for failover

Page 7 of 11

61. Which network feature is unsupported on the VxRail system NIC ports?

Spanning Tree

Multicast

Unicast

Link aggregation

62. An implementation engineer has just completed the deployment of a new VxRail cluster. They are unable to connect to the vCenter Server.

What can they use to confirm the physical health of the VxRail nodes?

vSphere Client

SRS

VxRail Manager

iDRAC

63. A systems engineer is tasked to configure a VxRail cluster and notices that the VxRail Deployment Wizard fails to launch. The engineer discovers that the software is corrupted.

What should the engineer do to address the issue?

Use the VMware Host Client and iDRAC to access the nodes for troubleshooting

Verify that the JSON file is not corrupted and has all the required values

Return the nodes to the original build state

Check vCenter and troubleshoot the build failure

64. Which URL is used to enter the planning information for a new VxRail Cluster deployment?

https://dl.dell.com/downloads/DL90235_Network-Validation-Tool-for-VxRail...

https://www.dell.com/support/home/en-us/product-support/product/vxrail-s...

https://etools-acg.dell.com/vxrail

https://vxrailconfiguration.dellemc.com

65. What is a requirement for the Top of Rack (ToR) switches used in a VxRail implementation?

MLD Querier

EtherChannel

IPV4 and IPV6 Multicast

LACP

66. A company needs to enable vSphere GPU capabilities on their VxRail cluster. To do so, they need to purchase a specific entitlement.

What licensing satisfies this requirement?

vSAN Enterprise Plus Edition

vSphere Enterprise Plus

vSphere Standard

vSAN Advanced Edition

67. When using the RASR method to reset a VxRail node, which boot device is selected?

RASRUSB

SATADOM

IDRAC SD CARD

IDSDM

68. What is a consideration when implementing a custom VDS on a VxRail cluster?

Used by multiple clusters managed by a single vCenter instance

Supported with external and internal vCenter Servers

Supports only four NIC uplinks

Supports only two NIC uplinks

69. What is required to configure SRS for VxRail?

VMware ELA

Dell EMC Support Account

Log Insight

VxRail Node Imaging Management Tool

70. After the installation of a VxRail cluster, the vSAN Health Check shows a hardware compatibility warning.

Where can detailed information about this health check and its resolution be found?

VMware Knowledge Base

VxRail Manager Help

Dell EMC Knowledge Base

vCenter Server Help

Page 8 of 11

71. A customer is running a 5-node VxRail all flash cluster with vSAN advanced licensing. They are unable to apply a RAID-6 Erasure Coding storage policy to the VMs.

What could be the cause?

vSAN license level is incorrect and needs upgrading.

Incorrect number of failure domains in the cluster.

VxRail cluster only supports mirroring with an FTT of 1.

RAID-6 Erasure Coding is only supported with stretched clusters.

72. Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

Mystic

Election

Marvin

Loudmouth

73. What does vSAN use to make metadata available to each host in the VxRail cluster?

Loudmouth

CMMDS

MLD Snooping and Querier

IPv6 Multicast

74. What is a consideration when using ToR switches with VxRail?

IPv6 Multicast must be disabled in this environment.

Link aggregation must be enabled on VxRail switch ports.

VxRail iDRAC Management ports require 10 GbE ports.

All-Flash models must use 10 GbE or faster ports.

75. After finishing the rack and stack of a VxRail Model G410 cluster, in which sequence should the nodes be powered on?

All four at the same time

Any order possible

Forward order (1 - 4)

Reverse order (4 - 1)

76. For which VxRail model must the iDRAC NIC Selection be set to LOM1?

G Series

E Series

D Series

S Series

77. A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches.

How should the switch ports used for VxRail be configured to achieve a successful deployment?

Enable MLD snooping and querier

Set the port type to edge

Set the port mode to access

Enable link aggregation for all ports

78. What native logging options are NOT available in the VxRail First Run Wizard?

SNMP

Syslog

None

Log Insight

79. What code is returned when a VxRail API request is executed successfully?

500

200

400

207

80. What is the remote management option for G Series VxRail nodes?

RMM

iLO

iDRAC

IPMI/BMC

Page 9 of 11

81. What is the correct order of steps to install a Dell PowerEdge-based VxRail cluster?

82. Which series of VxRail nodes is designed to support a large MongoDB environment that is being used for data analytics?

S Series

P Series

V Series

G Series

83. An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster.

How many VMs are licensed to be protected on the cluster?

84. 1.Which two files are used to automate VxRail deployment and validate the network configuration?

Appliance JSON file PEQ data file

Appliance JSON file SPEQ

VxRail Test Plan SPEQ

VxRail Configuration Portal PEQ data file

85. Which tool is required to re-image a VxRail G560F system?

POST

RASR

MBS

BOSS

86. A company is in the process of configuring their Top of Rack (ToR) switches as a single rack that replicates to a secondary data center with vSphere Replication.

What is a consideration for this configuration?

IPv6 and IPv4 multi-cast should be layer-3 routed between data centers

IPv6 and IPv4 multi-cast should span the entire network in each data center

IPv6 and IPv4 multi-cast traffic does not need to leave the ToR switches

IPv6 and IPv4 multi-cast traffic should span layer-2 between data centers

87. Which software component is an optional add-on for VxRail?

Dell EMC Secure Remote Support

VMware vRealize Log Insight

VMware vSAN

VMware vRealize Operations

88. In a VxRail Stretched Cluster built from eight all-flash nodes, what should be the recommended storage policy to ensure the highest possible protection?

Raid-1(Mirroring) FTT=1

Raid-1(Mirroring) FTT=2

Raid-5/6(Erasure Coding) FTT=1

Raid-5/6(Erasure Coding) FTT=2

89. A customer is performing self-deploy of a VxRail cluster. The VxRail Deployment Wizard fails to launch. The software appears to be corrupted.

What should they do to address the issue?

Use the VMware Host Client and iDRAC to access the nodes and troubleshoot the issue.

Verify that the Configuration file is not corrupt and has all the required values.

Use the vSphere Client and troubleshoot the issue.

Contact Dell support and request the nodes be reimaged.

90. A company has gradually expanded their VxRail environment over a period of years. They now need to update all the VxRail systems to the same code level. However, the company is concerned about the cost.

How could the company benefit by using VxRail REST API in the upgrade?

Report status of all running processes on a cluster or the status of a specific process

Enable automating of upgrade operations of one or more VxRail systems

Create iDRAC logs, database logs, and downloads log extracts

Report system statistics, heartbeat, and available node information

Page 10 of 11

91. A VxRail cluster is being deployed with an external vCenter Server.

What role needs to be assigned to the new VxRail Management User account within vCenter?

Read-only

Trusted Infrastructure Administrator

Administrator

No specific role

92. Which two log files can be used for troubleshooting when deploying a new VxRail Cluster?

loudmouth.log and dayone.log

marvin.log and dayone.log

localhost_access_log.txt and dayone.log

loudmouth.log and short.term.log

93. For which typical activity would the No data migration setting be used when placing a VxRail host into maintenance mode?

Temporary maintenance

Relocating host to remote data center

Shutting down an entire cluster

Permanently removing host from cluster

94. Which steps need to be taken to perform a file based restore of VxRail Manager?

Restore the initial clone of the VxRail Manager VM and it will update itself to the latest status.

Deploy a new VxRail Manager VM and rediscover the cluster environment executing the vxm_cluster_discovery.py script.

Deploy a new VxRail Manager VM and restore the configuration from backup with the vxm_backup_restore.py script.

Restore the latest cloned copy of the VxRail Manager VM from the BOSS drives on nodes 1 and 2.

95. From what environment must a network administrator run VxRail network validation?

Windows PowerShell command prompt

Same subnet as VxRail Management Network

Top of Rack switches

VxRail Deployment Wizard

96. What is a valid 2-node VxRail cluster in a direct-connect configuration?

D Series with 4x 25 GbE and internal vCenter

P Series with 2x 1 GbE and 2x 10 GbE and internal vCenter

E Series with 2x 1 GbE and 2x 10 GbE and external vCenter

G Series with 4x 10 GbE and external vCenter

97. Match the management tool that is used to perform the associated operation in a VxRail environment.

98. A customer is deploying a VxRail cluster in their datacenter and will be deploying other VxRail clusters in the coming months.

Which vCenter deployment option will be excluded from the VxRail Lifecycle software updates?

Existing VxRail-managed vCenter Server

Existing Customer-supplied vCenter Server

Internal VxRail-managed vCenter Server

99. Match each VxRail configuration with its related characteristic.

100. A VxRail is being deployed with the external vCenter Server.

What is a consideration with the VxRail Management account?

Must be a local user

Cannot be a new user

Must not be part of the SSO domain

Must be assigned the VMware HCIA Management role

Page 11 of 11

101. What is a supported witness configuration for a 3+3+1 VxRail Stretched Cluster?

Physical ESXi host with included cluster license

vSAN Witness appliance with customer provided license

Physical ESXi host with multiple VxRail clusters as witness

vSAN Witness appliance or a physical ESXi host

102. Which step must occur prior to deploying a 2 node VxRail Cluster?

Witness Traffic Separation configured

All ports connected to ToR switch

Cluster object created in vCenter

Witness deployed and running

103. What is a benefit of using the VxRail REST API?

Polling for vSAN performance statistics

Automated log collection for VxRail clusters

Automated security audit of VxRail clusters

Remote upgrades of iDRAC related software only

104. During a node add procedure the new node cannot be discovered. A ping to the IPv6 address is responding.

What could be the cause of this issue?

Only one network interface is up on the new node

vSAN VLAN is not configured correctly

Management VLAN ID is not set on the vmk0 interface

Loudmouth process is not running

TAGS:

D-VXR-DY-23, D-VXR-DY-23 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-VXR-DY-23 Dumps Full Version

Q&As: 344
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Get Certified Easily with Online D-VXR-DY-23 Dumps

Related

Posts

D-DPS-A-01 Exam Dumps – Reliable Way to Pass and Get Certified

Use D-PV-DY-A-00 Dumps to Obtain DELL EMC Certification

Online D-VXR-OE-01 Exam Dumps Help You Build Confidence

Good D-VXR-OE-01 Exam Dumps Save Your Preparation Time

About Us

EMAIL

Services

Opening Hours