LEED AP BD+C Dumps Questions Increase Your Chance of Success

Category:

Comments:

0 Comments

Post Date:

March 29, 2024

Passing the LEED AP BD+C certification exam can be challenging, which is why practicing with LEED AP BD+C questions can greatly increase your chances of success. USGBC LEED AP BD+C dumps questions help you become familiar with the exam format. The LEED AP BD+C questions are designed to mimic the actual exam, which means that you'll get a feel for the types of questions you'll encounter, the difficulty level, and the time limit. All the LEED AP BD+C exam dumps questions are the latest version for you to study. Test free LEED AP BD+C exam questions below.

Page 1 of 10

1. Which of the following activities must be prohibited within a building as a prerequisite to LEED certification?

Burning fossil fuels

Smoking tobacco products

Preparing non-organic foods

Manufacturing toxic chemicals

2. A new five-story building with a 30,000 ft2 (2 800 m2) footprint is being designed on a previously disturbed100,000 ft2 (9 290 m2) site. The remaining on-grade surface will be 35,000 ft2 (3 250 m2) of asphalt parking, and 35,000 ft2 (3 250 m2) of native vegetated open space. To achieve a point for exemplary performance under Option 1 of Sustainable Sites Credit, Site Development - Protect or Restore Habitat, the design team will have to incorporate a native and/or adapted vegetated roof with a minimum area of

12,500 ft2 (1 160 m2)

15,000 ft2 (1 400 m2)

25,000 ft2 (2 300 m2)

35,000 ft2 (3 250 m2)

3. A comprehensive rainwater management plan may include design elements such as

artificial turf, bioretention pond, cisterns and hay bales

cisterns, porous pavement, swales and vegetated roofs

soil compaction, swales, vegetated roofs and xeriscaping

bioretention pond, cisterns, porous pavement and stabilized construction entrance

4. For a whole building energy simulation approach, what should be identical for the base building and the proposed building?

Building orientation and process loads

Operating schedule and building orientation

Operating schedule and thermal blocks

Process loads and window area

5. A project team is deciding on the impact of a proposed concrete walkway.

Which of the following will be impacted as a result of adding the walkway?

Site's impervious cover

Project density calculations

Erosion and sediment control plan during construction

Air quality as a result of off gassing that occurs as concrete cures

6. For a new project with a $10 million construction cost, the weight of the total recycled content is 0.9 tons (816.5 kilograms) each for post-consumer and pre-consumer recycled content. The value of the total recycled content is one million each for post-consumer and pre-consumer recycled content.

What is the percentage of recycled content that contributes toward Materials and Resources Credit: Building Product Disclosure and Optimization - Sourcing of Raw Materials, Option 2, Leadership Extraction Practices?

33%

20%

40%

18%

7. A newly constructed school has installed solar thermal systems and wind turbines on site.

To achieve the maximum number of Energy and Atmosphere points, which team members must be included?

Energy Modeler and Contractor

Construction Manager and Energy Modeler

Energy Modeler and Commissioning (Cx) Agent

Commissioning (Cx) Agent and Facilities Manager

8. The total land area within a 1/4 mi. (0.40 km) radius of a project boundary consists of 130 acres (53 hectares) and has a residential to nonresidential ratio of 60:40. Within this same total land area, there are 780 dwelling units and 1,600,000 ft2 (148 645 m2) of nonresidential building space.

Given these parameters, what are the surrounding residential and nonresidential densities when attempting to achieve Location and Transportation Credit, Surrounding Density and Diverse Uses?

10 dwelling units per acre (24 dwelling units per hectare) and a Floor Area Ratio (FAR) of 0.47

10 dwelling units per acre (24 dwelling units per hectare) and a FAR of 0.70

13 dwelling units per acre (32 dwelling units per hectare) and a FAR of 0.47

15 dwelling units per acre (36 dwelling units per hectare) and a FAR of 0.70

9. What phase of the integrative process gives the team the greatest chance of success in meeting the project's environmental goals cost-effectively?

Design

Discovery

Operations

Construction

10. The design team has specified products to achieve Materials and Resources Credit: Building Product Disclosure and Optimization - Sourcing of Raw Materials, Option 2. Leadership Extraction Practices for the project. At the end of the construction, it was discovered that the transporter who shipped a portion of the wood did not have chain-of-custody (CoC) certification.

The design team should do which of the following?

Submit a Credit Interpretation Ruling (CIR) to get clarification from USGBC

Recalculate the percent of certified wood and consider the affected wood as non-certified

Recalculate the percent of certified wood and delete the affected wood from the calculation

Remove and replace the affected wood from the project site

Page 2 of 10

11. According to the Integrative Process Credit, Integrative Process, the goal-setting workshop should identify

potential project sites

targeted LEED credits

expected water demand

expected energy demand

12. A project attempting to meet the preferred parking requirements for Location and Transportation Credit, Green Vehicles may provide what incentive to meet the requirements and highlight the project sustainable vehicle strategy?

Three years of free parking for green vehicles

Preferred parking decals for 5% of occupants utilizing carpool vehicles

A permanent discounted parking rate of at least 20% for all green vehicles

An annual maintenance voucher for at least 5% of occupants driving green vehicles

13. A building owner installs a building automation system (BAS) to allow programmable load control.

Which of the following credits can be pursued because of the installation?

Energy and Atmosphere Credit, Demand Response B Energy and Atmosphere Credit, Ongoing Commissioning

Energy and Atmosphere Credit, Enhanced Commissioning

Energy and Atmosphere Credit, Enhanced Refrigerant Management

14. One point can be achieved through Sustainable Sites Credit, Heat Island Reduction by providing:

Preferred parking for green vehicles

A minimum of 75% of parking spaces under cover

Access to public transportation stops

A roof with artificial turf grass

15. Which of the following project team members should be integrated early into the design phase to assist with earning the Materials and Resources Prerequisite, Construction and Demolition Waste Management Planning?

Owner

Contractor

Occupants

Facility manager

16. The LEED project has a main entrance and two service entrances in an alley behind the building.

Which entrances need non-smoking signage and at what maximum distance from the door(s) can the non-smoking signage be posted?

At the main entrance, 10 ft. (3 m) from the door

At the main entrance, 25 ft. (7.5 m) from the door

At the main entrance and the two service entrances, 10 ft. (3 m) from the doors

At the main entrance and the two service entrances, 25 ft. (7.5 m) from the doors

17. What aspects of each space should the LEED consultant consider to identify the regularly occupied spaces on a project to ensure that floor area values are utilized consistently across credits?

Rate of outdoor air provided per person

Fire ratings of installed wall and ceiling assemblies

Average number of occupants standing or seated

Typical duration of occupancy in each space per day

18. Selecting a high-reflectance interior paint which is compliant with South Coast Air Quality Management District (SCAQMD) Rule 1113 can help contribute towards which two credits?

Indoor Environmental Quality Credit, Low-Emitting Materials and Indoor Environmental Quality Credit, Interior Lighting

Indoor Environmental Quality Credit, Low-Emitting Materials and Sustainable Sites Credit, Site Assessment

Indoor Environmental Quality Credit, Low-Emitting Materials and Indoor Environmental Quality Credit, Minimum Indoor Environmental Quality Performance

Indoor Environmental Quality Credit, Enhanced Indoor Environmental Quality Strategies and Indoor Environmental Quality Prerequisite, Minimum Indoor Environmental Quality Performance

19. What supporting material is required for all LEED Building Design and Construction projects in order to document Location and Transportation Credit, Bicycle Facilities for the bicycle network?

Photographs of bicycle network signage and directional signposts

Photographs of the installed bicycle storage and shower facilities

Vicinity map showing bicycle network, route and distance along network to eligible destination(s)

Manufacturer specifications for the chosen bicycle storage facilities, including the number of bicycles supported by each bike rack

20. When measuring sound pressure levels in a classroom to determine compliance with the HVAC background noise requirements of LEED Building Design and Construction: Schools, Indoor Environmental Quality Prerequisite, Minimum Acoustic Performance, what testing conditions are appropriate for the classroom?

Furnished, teacher speaking, HVAC operating at maximum flow rates

Unfurnished, teacher speaking, HVAC operating at typical level

Furnished, no occupants, HVAC operating at typical level

Unfurnished, no occupants, HVAC operating at maximum flow rates

Page 3 of 10

21. Water Efficiency Prerequisite, Outdoor Water Use Reduction, Option 2. Reduced Irrigation, requires that a project's landscape water requirement be reduced by what percentage from the calculated baseline for the project site's peak watering month?

20%

25%

30%

40%

22. Increasing which of the following variables will require an increase in the outdoor airflow rate under Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

Supply air velocity

Number of occupants

System ventilation efficiency

Supply air temperature set point

23. A project team reviews office chairs with a Type III environmental product declaration (EPD) for the five different categories of environmental impact reduction.

Which of the following must the chairs demonstrate for product optimization?

A reduction in at least two categories

A reduction below the industry average in at least three categories

A 5% reduction in all categories

A 10% reduction in GHG emissions and a 10% reduction in at least two other categories

24. Which of the following is an example of a nonroof measure for Sustainable Sites Credit, Heat Island Reduction?

A playground with artificial turf

A vegetated shading structure

A shade structure with a three-year aged Solar Reflectance Index (SRI) value of 0.2

A paving material with a three-year aged SRI value of 0.2

25. What requirement must be met when creating a Demand Response Program that satisfies Energy and Atmosphere Credit, Demand Response?

Permanently reduce the energy consumption in the building by 5%

Demonstrate submetering of the two highest electrical end uses

Demonstrate a load shift reduction of 5% in the building

Create a comprehensive plan for meeting a demand response event

26. A developer is considering an urban infill site for a new commercial building rather than a rural greenfield site adjacent to a stream.

Which of the following is an economic advantage of the infill site?

Protects greenfields and farmland

Preserves habitat and natural resources

Reduces need for new utility infrastructure

Reduces potential damage to an existing stream

27. In Sustainable Sites Credit, Light Pollution Reduction, which factor is included in the lamp lumen uplight calculation?

Total fixture power

Site area of the project

Quantity of installed luminaires

Total fixture lumens below 90 degrees

28. A LEED Building Design and Construction project includes an outdoor stage for theatrical performances. In pursuit of Sustainable Sites Credit, Light Pollution Reduction the engineer has specified an LED fixture to illuminate actors on the stage while limiting light pollution.

Which of the following suggestions should the LEED AP give to the project owner?

Modify the design to enclose the performance areas

Calculate the return on investment over the 20-year life of the project

Compare the energy consumption against an alternative

Inform the owner that the LED fixture is exempt from Sustainable Sites Credit, Light Pollution Reduction

29. When the LEED AP is applying the Integrative Process to a Building Design and Construction project, which of the following must be included in the Basis of Design (BOD)?

Training requirements

Allowable tolerance for facility operations

Facility, system and assembly performance assumptions

Environmental, energy efficiency and sustainability goals

30. Which of the following strategies will aid in reducing indoor water use?

Design drip irrigation for landscape

Use high-efficiency HVAC systems

Exclude janitor closets in the building

Optimize consumption of showerheads

Page 4 of 10

31. A design team is working on a new building project and is employing an integrated, whole-building approach. The architects want to increase the size of a glazed opening on the south facing wall.

Which team members are first affected by this change?

Civil engineers

Facility managers

Landscape architects

Mechanical engineers

32. Which of the following groups of documents is most likely to support both Indoor Environmental Quality Credit, Thermal Comfort, and Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control?

Surveys of occupants, photometric plans, mechanical schedules

Architectural floor plans, mechanical plans, lighting plans

Photometric plans, mechanical schedules, lamp specifications

Lighting plans, surveys of occupants, sequence of operations

33. A neighborhood housing development organization has dual goals, promoting occupant's health and minimizing energy costs.

What LEED Building Design and Construction, New Construction credit might the LEED AP propose to best achieve the organization's dual goals?

Location and Transportation Credit, Access to Quality Transit

Energy and Atmosphere Credit, Optimize Energy Performance

Indoor Environmental Quality Credit, Low Emitting Materials

Indoor Environmental Quality Credit, Daylight

34. Which of the following project types is required to consider the perimeter floor area instead of the regularly occupied floor area under the Indoor Environmental Quality Credit, Daylight calculations?

Retail

Schools

Healthcare

Core and Shell

35. Which of the following strategies is allowed under Energy Atmosphere Credit, Renewable Energy Production, and will help a project achieve Energy Atmosphere Credit, Optimize Energy Performance?

Install an on-site photovoltaic array

Purchase Green-e certified carbon offsets

Purchase Green-e certified Renewable Energy Certificates (RECs)

Install a ground-source heat pump

36. A new athletic facility contains a laundry room which is adjacent to the locker rooms.

Which strategy will contribute toward the Interior Cross-Contamination Prevention strategy in Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies?

Relocate the laundry facility to the basement

Naturally ventilate the laundry space per ASHRAE 62.1-2010

Install particle filters, with a MERV of 13 or higher or F7

Provide a ventilation system specifically for the laundry facility that has no recirculating air

37. Which of the following contributes to the value of the commissioning process?

Ensuring that the project budgetary goal is met

Verifying that the building systems perform as intended

Verifying that the building water fixtures are installed properly

Ensuring that the project is delivered to meet the permitting requirements

38. What is a viable strategy for optimizing open space under Sustainable Sites Credit, Open Space? U

Coordinate open space features during the construction phase

Minimize the floor-area ratio (FAR) and accessibility for open space

Design a parking and road footprint layout that is not near open land

Coordinate open space features early during the site planning phase

39. An office is relocating to a new facility. Any furniture that is relocated to the new site can contribute as a reused material for Materials and Resources Credit, Building Product Disclosure and Optimization - Sourcing of Raw Materials if it was purchased:

At least two years prior to the date of project registration

Within the past five years

Within two years of the substantial completion of the project

At least five years prior to the certification of the project

40. What LEED Building Design and Construction project type should exclude weekend transit service from the transit service level calculations for Location and Transportation Credit, Access to Quality Transit, if the project occupants do not commute to the building during weekends?

Schools

Data centers

Hospitality

Warehouses and distribution centers

Page 5 of 10

41. A tenant of a new office building will require 100 workstations per floor. Each floor will have two bathroom facilities and one conference room.

How many lighting control devices with at least three lighting levels per floor are required to comply with Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control?

91 lighting control devices

93 lighting control devices

100 lighting control devices

103 lighting control devices

42. A request to change the lighting fixtures in a conference room is made by a tenant.

Which of the following credit scorecard changes will be directly and indirectly impacted by the change in lighting fixtures?

Indoor Environmental Quality Credit, Interior Lighting and Sustainable Sites Credit, Light Pollution Reduction

Energy and Atmosphere Credit, Optimize Energy Performance and Indoor Environmental Quality Credit, Interior Lighting

Energy and Atmosphere Credit, Advanced Energy Metering and Indoor Environmental Quality Credit, Daylight

Indoor Environmental Quality Credit, Thermal Comfort and Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies

43. A project has total waste of 20 tons (18.1 tonnes) that includes the following:

・ 8 tons (7.3 tonnes) of recycled demolition steel and concrete

・ 2 tons (1.8 tonnes) of trees cleared from the site

. 3 tons (2.7 tonnes) of commingled scrap with 40% diverted

. 6 tons (5.4 tonnes) of used furniture donated to a non-profit organization

・ 1 ton (0.9 tonnes) of removed carpet and ceiling tiles sent back to the manufacturer

What is the percentage of diverted waste for Materials and Resources Credit, Construction and Demolition Waste Management?

60%

75%

90%

100%

44. Which of the following project types is required to consider the perimeter floor area instead of the regularly occupied floor area under the Indoor Environmental Quality Credit, Daylight calculations?

Retail

Schools

Healthcare

Core and Shell

45. A project elects to pursue Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2. Diverse Uses because of the project's location in an amenity-rich area. The project features 18 uses overall, including at least four uses in three of the five use type categories.

What threshold must the project surpass in order to demonstrate exemplary performance for Option 2?

Exemplary Performance is not available for Option 2

15 uses, including two uses in each of the five categories

15 uses, including at least one Food Retail and one Community Anchor use

18 uses, including uses in at least four of the five use type categories

46. What is the best strategy for a LEED AP to suggest in order to quantify the impact of increasing the window-to-wall ratio on a Building Design and Construction project?

Compare the current project to other similar projects

Monitor the HVAC loads throughout the life of the project

Perform a simple box energy model before the completion of the schematic phase

Review Green Business Certification Inc. (GBCI)'s comments on the energy model submission

47. An office project has the following items in its break room kitchen: a kitchen sink, a residential-style dishwasher, and a coffee machine.

How would these items be addressed in Water Efficiency Prerequisite, Indoor Water Use Reduction?

The kitchen sink is included in fixture calculations, the dishwasher and coffee machine must be ENERGY STAR® or performance equivalent

The kitchen sink is included in fixture calculations, the dishwasher must be ENERGY STAR® or performance equivalent, and the coffee machine is not included in the prerequisite

The kitchen sink and dishwasher must be WaterSense labeled and the coffee machine is not included in the prerequisite

The kitchen sink and dishwasher must be WaterSense labeled and the coffee machine should be included in fixture calculations

48. A topographic assessment of a project site located 150 ft. (45 m) from a water body was conducted.

The results of the slope analysis show that the site is generally sloping 6% to 8% to the northwest over most of the site, with some steep slopes located at the eastern edge of the property, which may impact the runoff volume.

Which one of the following LEED credits or prerequisites will be affected by these results?

Sustainable Sites Credit, Rainwater Management

Sustainable Sites Prerequisite, Environmental Site Assessment

Location and Transportation Credit, Sensitive Land Protection

Location and Transportation Credit, High-Priority Site

49. Which of the following is true regarding LEED Pilot Credits?

Pilot Credits are not specific to the rating systems

Pilot Credits can be attempted in the design review stage only

A registered Pilot Credit must be replaced on the LEED project's scorecard if that pilot credit is removed from the Pilot Credit Library

Pilot Credit feedback surveys must be completed

50. For Location and Transportation Credit, Access to Quality Transit, a project team preparing timetables and service-level documentation must ensure the materials include

verification that a weighted daily average has been used for each qualifying route

confirmation that functional entries of the project are within 3/4 mi. (1.20 km) of the stop

verification that a weighted building average has been used for each qualifying functional entry

confirmation that each qualifying route features paired route service (service in opposite directions)

Page 6 of 10

51. In order to achieve Indoor Environmental Quality Credit, Quality Views the project team increased the window-to-wall ratio.

Which prerequisite was impacted by this action?

Energy and Atmosphere Prerequisite, Minimum Energy Performance

Energy and Atmosphere Prerequisite, Building-Level Energy Metering

Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management

Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification

52. To achieve the Sustainable Sites Credit, Light Pollution Reduction, Option 1. BUG Rating Method, projects must demonstrate:

All luminaires have full cutoff fixtures

All luminaires are mounted at least three mounting heights from the lighting boundary

All luminaires have a minimum color temperature of 3500 K

All luminaires meet acceptable fixture ratings for the project’s Model Lighting Ordinance (MLO) lighting zone

53. What is a benefit of including the public in a charrette for a new school before the pre-design phase?

Neighbors can plan for future construction

It will help streamline the permitting process

Potential partnerships with the community can be revealed

The owner can determine financial strategies based on the public's input

54. U.S. Green Building Council (USGBC)'s vision for using LEED internationally includes

allowing more stringent credit requirements for countries outside of the

so that all projects can achieve LEED

creating multiple LEED rating systems for different countries

modifying

reference standards, such as ASHRAE 90.1, to be more appropriate for regions outside the

providing opportunities for alternative compliance paths that meet the unique needs of a particular region

55. Which of the following plumbing fixtures apply to the calculations in Water Efficiency Prerequisite,

Indoor Water Use Reduction?

Toilets, urinals, pre-rinse spray valves

Toilets, private lavatory faucets, dishwashers

Urinals, public lavatory faucets, kitchen sink faucets

Urinals, showerheads, commercial kitchen filling operations faucets

56. Which of the following actions should be taken to ensure that project team members understand and prioritize the selection of materials compliant with the Materials and Resources Credit: Building Product Disclosure and Optimization?

Select locally sourced and manufactured materials

Procure materials directly from raw material suppliers

Include all building materials in a whole-building life-cycle analysis

Include the material requirements in the project specifications

57. A commercial new construction project consists of mixed space usage.

When deciding which LEED rating system to use, the LEED AP should follow which of the following rules?

If a rating system is appropriate for less than 50% of the gross area of the LEED project space then the rating system must not be used

If a rating system is appropriate for more than 50% of the gross floor area of LEED project space, then that rating system must be used

If a rating system is appropriate for 30% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

If a rating system is appropriate for 40% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

58. When a project team sustainably develops a project site, the design should

increase water runoff

maximize construction pollution

remediate sites already in decline

replace natural water flow patterns

59. Building Product Disclosure and Optimization is based on market

reliability

durability

transparency

consumption

60. Which of the following Building Product Disclosure and Optimization credits under the Materials and Resources category would a project team achieve by using insulation material that is cradle-to-cradle V3 Gold certified?

Material Ingredients, Option 2. Leadership Extraction Practices and Environmental Product Declarations, Option 1. Environmental Product Declarations (EPD)

Material Ingredients, Option 1. Material Ingredient Reporting and Material Ingredients, Option 2. Material Ingredient Optimization

Sourcing of Raw Materials, Option 1. Raw Material Source and Extraction Reporting and Material Ingredients, Option 2. Material Ingredient Optimization

Sourcing of Raw Materials, Option 2. Leadership Extraction Practices and Material Ingredients, Option 2. Material Ingredient Optimization

Page 7 of 10

61. A project team seeking certification for a new school is attempting to achieve Materials and Resources Credit, Construction and Demolition Waste Management, Option 2. Reduction of Total Waste Material.

What strategy can be taken to meet the requirements of this credit?

Track waste materials per occupant

Track waste materials used on site

Document total waste by project cost

Document total waste per building floor area

62. What stage of LEED for Neighborhood Development certification listed below is eligible for points under Building Design and Construction: New Construction, Location and Transportation Credit, LEED for Neighborhood Development Location?

LEED v4, LEED for Neighborhood Development Conditional Approval

LEED for Neighborhood Development Pilot, Stage 3 LEED for Neighborhood Development Certified Project

LEED for Neighborhood Development Pilot, Stage 1 LEED for Neighborhood Development Pre-reviewed Plan

LEED 2009, Stage 1 Conditional Approval of LEED for Neighborhood Development Plan

63. Which of the following variables must be included in the calculations for Indoor Environmental Quality Credit, Quality Views?

Ceiling heights

Building furniture

Movable partitions

Permanent interior obstructions

64. For a task chair purchased for a healthcare facility, which portion of the product contributes toward Materials and Resources Credit, Furniture and Medical Furnishings?

Wheels, 4% of product by weight, that do not contain lead, mercury, cadmium or antimony

Fabric, 5% of product by weight, with stain resistant treatment containing Perfluorinated Compounds (PFCs)

Metal base, 20% of product by weight, which do not contain heavy metals and is not plated with hexavalent chromium

Plastic armrests, 30% of product by weight, with added antimicrobial treatment

65. Which of the following strategies can be used to achieve a point in Innovation Credit, Innovation, Option 1.Innovation?

Achieve 60% reduction in outdoor water use

Implement an employee engagement and education plan

Use on site renewable energy for 8% of the total energy needs

Purchase green power for 100% of the total project energy use

66. 1.Which of the following buildings meets the Minimum Program Requirements for LEED certification?

A 1,500 ft2 (139 m2) Tourism Center located on a previously undeveloped one-acre site

A 20,000 ft2 (1 859 m2) Transit Parking Garage located on a previously developed five-acre site

A 2,500 ft2 (232 m2) mobile Health Clinic located on a previously constructed above-water dock

A 5,000 ft2 (465 m2) Science Education center on an above-water pier that is being built specifically for the Education center

67. A project has a potable water source as well as two alternative water sources.

Which of the following statements is applicable for a project using two alternative water sources?

A project may not use two alternative water sources

Target the uses that require the least treatment first

Match uses by location: indoor sources to indoor uses, outdoor sources to outdoor uses

All alternative water sources should be treated to potable water standards

68. In the energy modeling of a building envelope, which of the following U-values should be considered as an assembly U-value?

Wall

Steel

Glass

Concrete

69. A new school with a 20 car parking lot has set aside four preferred parking spaces for green vehicles.

What else must the project team provide to achieve Location and Transportation Credit, Green Vehicles?

Nothing; the project team has met the credit requirements

Provide secure bike racks for 5% of the building occupants

Provide an additional parking space for a low-emitting and fuel-efficient vehicle

Provide qualifying electrical vehicle supply equipment in 2% of all parking spaces

70. Which of the following is the location of CO2 sensors in naturally ventilated spaces to comply with the Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

At least 6 ft. (2 m) above the floor

At least 3 ft. (1 m) away from windows

Between 3 ft. and 6 ft. (1 m and 2 m) above the floor

On the ceiling 3 ft. (1 m) away from adjacent walls

Page 8 of 10

71. The Exemplary Performance threshold for Sustainable Sites Credit, Rainwater Management requires:

Utilizing a rain garden to manage the 98th percentile rainfall event

Managing 100% of rainfall that falls within the project boundary

Achievement of both Option 1. Percentile of Rainfall Events and Option 2. Natural Land Cover Conditions

Utilizing a combination of both structural and non-structural measures to manage the 98th percentile rainfall event

72. Which of the following criteria does a project need to implement in order to qualify for Sustainable Sites Credit: Site Development - Protect or Restore Habitat, Option 1?

Use of natural plants rated for their effect in reducing the heat island effect, while also restoring a minimum of 20% (including the building footprint) of all portions of the site identified as previously disturbed

Use of only native or adapted vegetation, along with not restoring a minimum of 36% (including the building footprint) of all portions of the site identified as previously disturbed

Use of native or adapted vegetation, restoring a minimum of 30% (including the building footprint) of all portions of the site identified as previously disturbed

Use of natural vegetation and not artificial greenery, restoring a minimum of 25% (including the building footprint) of all portions of the site identified as previously disturbed

73. A project team has installed a rainwater harvesting system on site. In which of the following could this system be recognized?

Water Efficiency Credit, Water Metering and Water Efficiency Prerequisite, Indoor Water Use Reduction

Water Efficiency Credit, Water Metering and Water Efficiency Prerequisite, Outdoor Water Use Reduction

Sustainable Sites Credit, Rainwater Management and Water Efficiency Credit, Indoor Water Use Reduction

Sustainable Sites Credit, Rainwater Management and Water Efficiency Prerequisite, Indoor Water Use Reduction

74. A LEED AP is evaluating whether Indoor Environmental Quality Credit, Acoustic Performance is feasible for a LEED

AP Building Design and Construction: Healthcare project.

Which of the following groups of documents would best inform this decision?

Airport flyover maps, mechanical plans, wall sections

Patient records, wall sections, ceiling panel cut sheets

Occupancy statistics, patient records, MRI machine specifications

MRI machine specifications, mechanical plans, occupancy statistics

75. If a commercial building is considered to have 100 peak visitors in a day, what is the minimum number of short-term bicycle storage spaces that must be provided to earn one point under Location and Transportation Credit, Bicycle Facilities?

Three

Four

Five

Ten

76. Which of the following credit options can a project team attempt if a local, national, or international organization indicates that the neighborhood site of the project has a significant cultural value?

Historic district

Priority designation

Brownfield remediation

Diverse uses

77. Which of the following would be most useful to a school project that is attempting to pursue Water

Efficiency Credit, Indoor Water Use Reduction?

A standard garbage disposal

Electronic submeter at the domestic water supply pipe to the building

An open-loop HVAC system that discharges potable cooling water to a nearby lake

Commercial dishwasher that is ENERGY STAR® labeled or performance equivalent

78. The goal of the design charrette during Integrative Process Prerequisite, Integrative Project Planning and Design is to:

Develop the building energy model

Optimize the green strategies across all aspects

Calculate the life cycle cost of the building

Choose an appropriate Commissioning Authority (CxA)

79. What are the three phases within the Integrative Process Credit, Integrative Process?

Pre-design, Discovery, Design and Construction

Discovery, Design and Construction, Operations and Feedback

Schematic Design, Design and Construction, Operations and Feedback

Design Charrette, Schematic Design, Operations and Feedback

80. In the calculations for Water Efficiency Credit, Outdoor Water Use Reduction, food gardens

must be calculated using at least 20% from an alternative water source

must be calculated using 100% potable water

may be included or excluded from the calculations

may be calculated using a standard 20% reduction from baseline

Page 9 of 10

81. What credit rewards customers who change their normal consumption patterns in response to the varying price of energy over time?

Energy and Atmosphere Credit, Demand Response

Energy and Atmosphere Credit, Advanced Energy Metering

Energy and Atmosphere Credit, Building Level Energy Metering

Energy and Atmosphere Credit, Green Power and Carbon Offsets

82. A core and shell project is located in a dense urban area that is known to have frequent fluctuations in the power supply grid (brown-outs). The project team is seeking LEED Platinum certification.

Which credit should be pursued when considering the regional context?

Energy and Atmosphere Credit, Demand Response

Energy and Atmosphere Credit, Advanced Energy Metering

Energy and Atmosphere Credit, Green Power and Carbon Offset

Energy and Atmosphere Credit, Enhanced Refrigerant Management

83. The contractor has submitted waste hauling reports for review in order to achieve Materials and Resources Credit, Construction and Demolition Waste Management.

Which of the following materials on the documentation contribute towards the credit?

Excavated soil

Wood derived fuel

Items sent to the local incinerator

Alternate Daily Cover

84. Which of the following will result in a higher demand for potable water use in irrigation?

Sparsely planted area

Drip irrigation system

High evapotranspiration rate

Rainwater harvesting system

85. A project's installed water fixtures do not exceed WaterSense maximum levels.

Which compliance path should the LEED AP select under Water Efficiency Prerequisite, Indoor Water Use Reduction, and what type of documentation is required to demonstrate compliance with this path?

Compliance Path 2: Usage-Based Calculation; prescriptive compliance confirmation

Compliance Path 2: Usage-Based Calculation; appliance water calculations

Compliance Path 1: Prescriptive Achievement; indoor water use calculations

Compliance Path 1: Prescriptive Achievement; product cutsheets

86. Smoking is prohibited inside LEED-certified buildings in order to eliminate the health risks associated with environmental tobacco smoke.

Which building type is exempt from this requirement?

Office projects

Healthcare projects

Warehouse projects

Residential projects

87. The use of lead, mercury, copper and cadmium should be limited because they all

are persistent bioaccumulative toxins

reduce the life cycle assessment of a building

take an unreasonable amount of energy to recycle

interfere with the magnetic instruments in a medical building

88. A facility manager cleaning highly reflective paving material is

unnecessarily wasting water

reducing the heat island effect

increasing the heat island effect

lowering the Solar Reflectance Index (SRI)

89. A project team is using the whole building simulation model to quantify the percentage of energy savings for the project.

Which of the following should remain the same for both the baseline building and the proposed building?

Building operating schedule and occupancy hours

Building operating schedule and total window area

Building envelope construction and occupancy hours

Total window area and building envelope construction

90. A luxury hotel project is in the design phase and is located on a scenic waterfront. It is one point away from attaining LEED Platinum certification. The LEED AP is recommending that the team pursue Innovation Credit, Innovation, Option 3. Additional Strategies.

Which of the following credits would be desirable considering the location of the project?

Energy and Atmosphere Credit, Optimize Energy Performance, Exemplary Performance

Indoor Environmental Quality Credit, Quality Views, Exemplary Performance

Indoor Environmental Quality Credit, Acoustic Performance, Exemplary Performance

Energy and Atmosphere Credit, Enhanced Commissioning, Exemplary Performance

Page 10 of 10

91. In order to achieve the requirements of LEED, the Electrical Vehicle Supply Equipment (EVSE) must comply with:

State, but not regional standards established for electrical vehicles operated within the state of vehicle operation

Regional, state, or local standards for the electrical connectors to be used

Level 1 charging capacity (110 volts AC)

Manufacturer's standards established for electrical vehicles operated within the state of vehicle primary operation

92. To assess the feasibility of earning Location and Transportation Credit, Reduced Parking Footprint, the project team should be familiar with what local government regulation?

Design guidelines for orientation of parking garages along street frontages

Minimum dimensions for on-street parking spaces required by the zoning code

Building code standards for structured parking garages

Minimum number of parking spaces required by the zoning code

TAGS:

LEED AP BD+C, LEED AP BD+C exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get LEED AP BD+C Dumps Full Version

Q&As: 305
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

LEED AP BD+C Dumps Questions Increase Your Chance of Success

Related

Posts

Use LEED AP ID+C Dumps to Obtain USGBC Certification

2024 USGBC LEED AP ND Exam Dumps Questions

Good LEED Green Associate Exam Dumps Save Your Preparation Time

About Us

EMAIL

Services

Opening Hours