Online D-VXR-OE-01 Exam Dumps Help You Build Confidence

1. What is the block size and object level of the vSAN deduplication algorithm?

2. What is the benefit of using VxRail Appliance REST API?

3. What is the primary benefit of using the VxRail Plugin for vCenter Server?

4. SIMULATION

During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is

required to be enabled so the node can be correctly identified in the physical rack.

Use the simulator to enable the System LED for the node.

5. A failure occurs while upgrading a VxRail cluster.

Which log file should be analyzed?

6. Where in the VxRail Plugin can log bundles be generated?

7. SIMULATION

An administrator must upgrade a VxRail cluster 7.0.x at a dark site.

The credentials for the system are:

VxRail Manager username: root

VxRail Manager password:

VMw@r3!123

vCenter Administrator:

[email protected]

vCenter Administrator password:

VMw@r3!123

VCSA username: root

VCSA password: VMw@r3!123

Use the simulator to upgrade the cluster to the latest recommended version.

8. SIMULATION

A VxRail administrator is concerned about security and wants to protect the vSAN storage against unauthorized access (for both data on disk and in flight.)

Use the simulator to enable the relevant services. A vSphere Native Key Provider has already been configured.

9. What authorization method is used tor VxRail API calls?

10. How is cluster resource contraction performed in a VxRail environment?

11. What is the role of VMware vSAN in the management of a VxRail cluster?

12. An environment has two VxRail clusters In vCenter there is only one vSphere Distributed Switch object for both clusters.

Which deployment architecture was used for these clusters?

13. An administrator wants to implement a disaster recovery solution. Two sites are available. The primary site uses VxRail and the secondary site uses a non-vSAN VMware environment.

Which technology minimizes data loss with the smallest recovery point objective for this scenario?

14. An administrator is trying to replace the VxRail Manager Certificate.

Where in the vSphere Client is the option located?

15. What is the maximum number of disk groups supported by a VxRail P Series node?

16. How is vSAN Health monitored within a VxRail environment?

17. Which resource should an administrator use when beginning a VxRail cluster design?

18. How are software updates typically applied in VxRail?

19. When a RAID-5 storage policy is used, what is the minimum number of VxRail nodes required for vSAN self-healing after a failure?

20. How are updates typically deployed on a VxRail system?

21. What role does the vSAN Storage Policy play in VxRail?

22. Which of the following is a typical feature of VxRail cluster management via the vCenter plugin?

23. Where is the VxRail Dashboard located in the vSphere client?

24. What is the correct path for editing the Object Repair Time from the vCenter client?

25. An application VM must tolerate two faults.

Which VxRail cluster configurations would support this requirement?

26. When does vSAN deduplication occur in a VxRail cluster?

27. Cable VxRail PCIe ports to ToR switches

28. A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.

Where is this information located in the vSphere Client?

29. Which authentication method is used in VxRail API?

30. An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster. The administrator needs more information to resolve the security issues.

What should be used to gather the required information?

31. An organization wants to implement a zero data loss protection solution for its virtual machines.

What is the recommended solution when using a VxRail system?

32. Which task would you use the VxRail API to perform?

33. What is a benefit of using a trusted third party or an organization CA in VxRail Manager?

34. How do you perform a VxRail software upgrade?

35. A VxRail administrator has determined that the stretched cluster storage is being consumed by non-critical VMs that do not require failover capabilities. These VMs have no performance or location requirements.

Which 'Site disaster tolerance' storage policy will minimize the storage usage?

36. Create a VDS with the required number of uplinks.

37. Which VxRail cluster can tolerate a host failure?

38. An administrator must shut down a VxRail cluster However the validation process has failed and cannot be completed

What action must be taken to correct the issue?

39. How are software updates applied in a VxRail environment?

40. How can the vSAN configuration of a VxRail cluster be validated?

41. What is a supported feature when using a vSAN HCI Mesh?

42. Which three processes are performed during a VxRail cluster shutdown? (Select 3)

43. When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur?

44. What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters?

45. A VxRail cluster is supporting a VDI workload using full clones.

What is the recommended space efficiency setting for this workload?

46. A VxRail administrator is trying to run a Storage Performance Test for vSAN. However, they do not see that option in vCenter.

What could be the reason?

47. A VxRail Cluster has been deployed with four VxRail E560 nodes each using tour integrated NIC ports and the default network profile.

Which vmnics carry the VxRail management traffic, and in what teaming and failover configuration?

48. What is involved in performing a VxRail Manager File-based Backup?

49. A customer requires an All-Flash system, with compression and deduplication, RAID-5/6 capability, and Data at Rest Encryption.

Which vSAN license level should be recommended?

50. For how long is the vSAN Health history of the VxRail system stored?

51. In a VxRail G560 node, which integrated NIC port is the Active port for vSAN traffic?

52. What API is used to perform tasks in a VxRail environment?

53. How does VxRail support cluster scalability?

54. What are the latency and bandwidth requirements between data sites when deploying a VxRail Stretched Cluster?

55. SIMULATION

An existing 4-node VxRail standard cluster has to be scaled out with 2 additional nodes and configured as a stretched cluster.

An administrator must prepare a vSAN storage policy that should have the following:

- vSAN Policy Name: vSAN Stretched Cluster

- Data protection across the sites

- Local protection: RAID-1 with FTT=1

- Thick Provisioning

An administrator should be able to provision a VM even if the currently available cluster resources cannot satisfy the current policy.

Use the simulator to create the required vSAN storage policy.

56. A customer will be managing multiple VxRail clusters using 7.0.130 or greater. There is no budget allocated for additional servers or licenses. The customer prefers to have a single vCenter.

What is the recommended vCenter deployment option?

57. In a VxRail appliance, which task is performed using VxRail Manager?

58. VxRail 4.5.200 has been deployed with the VxRail deployed vCenter.

What is the name of the vCenter datacenter for the newly deployed VxRail cluster?

59. By default, how often does the vSAN Skyline Health check run?

60. In which environment is it recommended to enable vSAN deduplication and compression?

61. A VxRail administrator has been informed by Dell EMC that an Internet software upgrade is available for their VxRail cluster. The administrator logs into VxRail Manager. VxRail Manager shows only the Local Upgrade option and not the Internet Upgrade option.

What is a possible reason?

62. An administrator has been performing maintenance on a host for the past 60 minutes. The node was put in maintenance mode with ‘ensure accessibility’ selected. Users begin to cite poor performance on the cluster.

What is causing the poor performance?

63. Which vSAN troubleshooting option provides improvement recommendations for the VxRail cluster?

64. What is a network consideration for VxRail version 4 5.x?

65. Which VxRail model series supports only hybrid disks?

66. What is a consideration when using a VxRail Cluster with vSphere Standard Edition licensing?

67. When using a vSAN storage policy with FTT = 1 and FTM = Mirroring, how many witness components exist for a VMDK?

68. At what object level is vSAN deduplication and compression enabled for a VxRail system?

69. Which level of data protection can be configured across sites in a VxRail Stretched Cluster?

70. If automatic rebalancing is not configured, when does vSAN perform reactive rebalancing?

71. You are checking the overall health of the VxRail vSAN environment.

Which VMware interface are you using?

72. For what purpose is the VxRail REST API primarily used?

73. You are planning to install CloudArray Virtual Edition.

Where should you navigate to in VxRail Manager?

74. What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?

75. Use what network configuration is considered a best practice for VxRail clusters? Choose the correct option from the given list.

76. What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?

77. A VxRail administrator observes alarms that start with VXR in the vSphere client.

How can they obtain information about the alarms and the related knowledge base articles?

78. What is the vSAN automatic rebalancing threshold recommended by VMware?

79. An environment has two VxRail Clusters with this configuration:

- VMs on Cluster-A use a policy with FTT = 1 and FTM = Erasure Coding.

- VMs on Cluster-B use a policy with FTT = 1 and FTM = Mirroring.

A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.

How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?

80. A VxRail administrator wants to search for VxRail related knowledge base articles through the VxRail Manager user interface.

Which action must the administrator perform to use this feature?

81. What are two failure states of vSAN components? (Select 2)

82. A customer has a large storage capacity and low I/O performance requirements.

Which VxRail solution is the best fit?

83. An administrator has logged into their VxRail cluster and noticed that all nodes are in a disconnected state. Upon logging into individual nodes, all workloads are running and no services have been affected. The licensing applied to the cluster is still in Evaluation mode. The administrator sees an unused vSphere License Key.

What steps should the administrator follow to properly license the cluster?

84. A VxRail administrator observes alarms that start with VXR... in the vSphere client.

How should the administrator find detailed information about the alarms and related knowledge-base articles?

85. What functionality does the VxRail Appliance REST API provide?

86. What is the maximum number of remote vSAN data stores a client cluster can mount using vSAN HCI Mesh?

87. After a successful code upgrade of a VxRail Cluster, the administrator views the installed components in the vSphere client to validate the code levels.

Which component will be listed?

88. When is the vSAN performance service typically enabled?