2024 DELL EMC D-RP-DY-A-24 Exam Dumps Questions

Category:

Comments:

0 Comments

Post Date:

March 30, 2024

DELL EMC certification is a highly valuable and sought-after certification for IT professionals seeking to enhance their knowledge and expertise. D-RP-DY-A-24 exam is specifically designed to validate the skills required to configure and maintain the Dell Data Protection platform, which is widely used by businesses around the world. These D-RP-DY-A-24 exam dumps questions are specifically designed to help you prepare for the exam by testing your knowledge and providing you with valuable insights into the types of questions that you will encounter. Test free DELL EMC D-RP-DY-A-24 exam questions below.

Page 1 of 8

1. You have VMware SRM with RecoverPoint protection already configured.

What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?

VSI RecoverPoint Management plug-in

Replication Manager

VSI for VMware vSphere Web Client

RecoverPoint SRA

2. What is the minimum number of RecoverPoint Clusters required to use the MetroPoint feature?

3. What is the maximum number of copies supported using the MetroPoint topology for VPLEX continuous data replication?

4. In what situations is RecoverPoint particularly effective compared to other solutions?

When minimal RPO is required

For long-term data archival

For high-frequency transaction environments

When integrating with legacy systems

5. A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However, they are unable to manage the cluster through Unisphere.

What should the customer do to correct the issue?

Convert to RecoverPoint/SE using Deployment Manager

Reinstall the RecoverPoint splitter enabler on the VNX

Rescan the VNX splitters in the management application

Reinstall the RecoverPoint/SE license file

6. A customer is evaluating the deployment of RecoverPoint with their VNX array. They want to deploy the RPAs in virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

They cannot mix physical and virtual RPAs within their RPA cluster.

For performance reasons, they can mix vRPAs and physical RPAs in the remote RPA cluster.

vRPAs cannot be used in a VNX environment.

They can mix vRPA and physical RPAs in the same RPA cluster at all sites.

7. What is a possible trigger to initiate RecoverPoint Snap-based Replication?

High Load condition detected

RecoverPoint snapshot takes place

INIT snapshot takes place

Incoming date marked on Delta Marker stream

8. Which aspect of RecoverPoint allows it to rollback changes to any point-in-time?

The extensive use of journal volumes

The integration with external time servers

The implementation of change data capture

The continuous monitoring of I/O operations

9. A Consistency Group consists of one production copy, one local copy, and two remote copies.

How many journals are required for this configuration?

Four in total

Two in total

One for each remote copy and one for the local copy

One for the production and one for each remote copy

10. A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible?

Add two RPAs to the primary site and add two RPAs to the DR site

Add two RPAs to the primary site only

Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site

Add two RPAs to the DR site only

Page 2 of 8

11. Which Open Replicator mode is used by the RecoverPoint VMAX write splitter?

Modified Hot Push

Cold Push

Hot Pull

Cold Pull

12. What is the minimum size of the journal when using Distributed Consistency Groups?

5 GB

20 GB

40 GB

60 GB

13. You ran Collect System Information from an RPA. However, you forgot where you specified to save the logs on the FTP server.

What is the recommended way to retrieve the logs?

Use http:// /info

Re-run Collect System Information from the RPAs

Re-run Collect System Information from the GUI

Use ftp://

14. What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

RecoverPoint Splitter Enabler only

RecoverPoint Driver and RecoverPoint Splitter Enabler

RecoverPoint License

Unisphere Service Manager

15. What strategic advantages does RecoverPoint offer for business continuity planning?

It supports multi-site replication for disaster recovery.

It allows live migration of virtual machines.

It enables automatic failover to hot standby sites.

It provides tools for simulating disaster scenarios.

16. What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

Distributed Consistency Groups

Journal Compression

Fibre Channel connections

Multi-Cluster copies

17. Snap-based Replication requires the production volume of a Consistency Group to be on which array type?

VNX

VMAX

VPLEX

Isilon

18. In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

Test a Copy

Enable Image Access

Manage Recovery

Enable Direct Access

19. A customer environment uses VMAX arrays for production storage. The customer wants to implement RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well.

What should you advise them?

vRPAs are only supported with VNX arrays

Add iSCSI interfaces to their VMAX arrays

Use vRPAs with FC connections to the SAN

Implement FCoE for connections from the vRPAs

20. What is required to configure RecoverPoint for synchronous replication?

Low-latency network connections

High bandwidth network connections

Special software on the host

Dedicated management interface

Page 3 of 8

21. Which configuration setting is crucial for optimizing RPO and RTO in RecoverPoint?

Network QoS settings

Journal volume size

Consistency group settings

Snapshot interval

22. What considerations must be made when using RecoverPoint for operational recovery?

The speed of recovery

The impact on production environments

The accuracy of data restoration

The geographical location of backup resources

23. A large data center is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to an environment with two VNX arrays.

How many RecoverPoint clusters can be used in this environment?

12 clusters, assuming each LUN is attached to only one cluster at a time

6 clusters, assuming only vRPAs are used

12 clusters, assuming each LUN is replicated across the clusters

6 clusters, assuming each LUN is attached to only one cluster at a time

24. After running a log collection, which user should you log in as to download the output file?

admin

monitor

boxmgmt

security-admin

25. An application team will be performing a major update to a RecoverPoint protected application. You have been asked by the application team for the best way to ensure a quick recovery at the remote cluster in case the update fails.

In RecoverPoint, what should be done to the associated Consistency Group?

Manually create a bookmark prior to the update

Enable logged access mode on the source

Enable physical access on the target

Use virtual access mode on the source

26. You are installing RecoverPoint/SE, and have selected the automatic zoning option. There are four VNX ports in each fabric.

How many zones are automatically created on each fabric for a two-node RPA cluster?

27. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 100 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

Use Deployment Manager to convert the existing instance to RP/E

Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.

Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.

28. Which feature of RecoverPoint requires the production copy to be located on a VNX?

Snap-based Replication

Deduplication

Synchronous replication

Distributed Consistency Groups

29. What is a prerequisite for deploying a RecoverPoint/SE system?

VNX splitter enabled

RecoverPoint/SE license installed

RecoverPoint/SE registered with EMC

Unisphere for RecoverPoint installed and running

30. You are protecting a volume using the wizard in Unisphere for RecoverPoint.

Which state will the new Consistency Group be in immediately after completing the wizard?

Initializing

Active

Paused

Disabled

Page 4 of 8

31. What determines the replication distance capabilities of RecoverPoint?

The size of the data being replicated

The type of data interface used

The bandwidth and latency of the network connection

The processing power of the RPAs

32. An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays.

Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?

RPA 1 and RPA 2

RPA 1 only

All RPAs in the cluster

RPA 2 only

33. What are key use cases for RecoverPoint?

Disaster Recovery, Operational Recovery, and Data Migration

Disaster Recovery and Operational Recovery only

Disaster Recovery and Data Migration only

High Availability Solution Implementation

34. Which type of Consistency Group requires a primary and secondary production copy?

MetroPoint

Synchronous

Distributed

Asynchronous

35. What Installation Manager menu selections would you make to view the VNX iSCSI ports?

3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports

3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details

3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs

3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity

36. Which protocol does the vRPA use to access the journal volumes?

iSCSI

FCoE

37. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 500 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

Use Deployment Manager to convert the existing instance to RP/E

Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.

Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.

38. What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

RecoverPoint Splitter Enabler only

RecoverPoint Driver and RecoverPoint Splitter Enabler

RecoverPoint License

Unisphere Service Manager

39. A company is currently using RecoverPoint/CL with CLARiiON CXs in their environment. All of the data has been migrated to new VNXs and the CX splitters need to be removed from RecoverPoint.

How is this accomplished?

In Unisphere for RecoverPoint, navigate to RPA Clusters > RPA-Cluster-Name tab > Splitters and remove the CX splitters

In Unisphere for RecoverPoint, navigate to RPA Clusters > Splitters and remove the CX splitters

Use RecoverPoint Deployment Manager to remove the CX splitters

The CXs will not be detected by Unisphere and the splitter entries will be removed automatically

40. What is a key benefit of RecoverPoint's continuous data protection over periodic backups?

It requires less storage space.

It provides immediate recovery points.

It is easier to configure.

It costs less to maintain.

Page 5 of 8

41. What are essential components for setting up a RecoverPoint environment?

Sufficient bandwidth for data replication

Identical storage hardware at all sites

Licensed RecoverPoint software

Properly configured network infrastructure

42. Your business is planning to deploy RecoverPoint for your DR solution.

What is an important consideration when using Consistency Groups in RecoverPoint 4.1?

Supports up to two synchronous copies per Consistency Group

Supports up to three remote copies in a same remote cluster

Fibre connectivity is required for synchronous replication

Supports host-based and array-based write splitters

43. What role does the splitter play in the RecoverPoint architecture?

Divides data streams between local and remote sites

Splits write I/O from the host to the journal volume

Manages replication traffic between clusters

Ensures data consistency across copies

44. Which image access mode provides the quickest way to access data?

Virtual Access

Logged Access

Direct Access

Snap Access

45. In a EMC RecoverPoint environment, which EMC product adds support for heterogeneous storage systems?

VPLEX

VNX/CX

VMAX

Isilon

46. How does RecoverPoint handle network failures during data replication?

It automatically retries failed transmissions.

It switches to an alternate network path if available.

It pauses replication until the network is restored.

It logs errors for manual intervention.

47. Which write splitter type allows host connectivity to production LUNs with either iSCSI or FC?

VNX

VPLEX

VMAX

SanTap

48. You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX.

What is the recommended management solution?

Create one CG using VNX and VMAX volumes

Create a new RecoverPoint cluster and add the VNX splitter

Migrate all LUNs to the VMAX

Create two CGs: one for VNX volumes and another for VMAX volumes

49. What action causes the loss of journal content?

The replica is accessed in Direct Access mode

Enabling Image Access mode

A journal is added to a Consistency Group

An RPA performed marking

50. Refer to the exhibit.

image005/

A RecoverPoint cluster with two RPAs and VPLEX splitter has been deployed. When you run the rp validate-configuration VPLEX CLI command, the error shown in the exhibit is displayed.

What is the most likely cause of this error?

Only two initiators per RPA have been used.

The RPAs are not zoned to the VPLEX BE ports.

One of the two RPAs is missing.

The RPAs are not zoned to the VPLEX FE ports.

Page 6 of 8

51. A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails.

What could be causing this?

vSphere client not installed

vSphere client not running during the installation

RPAs used were all virtual

At least one virtual RPA present

52. Select all options that correctly describe the deployment considerations for RecoverPoint/CL protecting data within a data center.

Maximum of one additional cluster can be added

Maximum of two additional clusters can be added

Maximum of four additional clusters can be added

Maximum of five additional clusters can be added

53. Through what does RecoverPoint support heterogeneous storage environments?

VPLEX

Any array-based splitter

APIs

VMAX splitter only

54. Which tool do you need in order to run the save_settings command from a Windows command prompt?

PLink

PuTTY

CuteFTP

WinSCP

55. When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

usernam

boxmgmt passwor

boxmgmt

usernam

admin passwor

Mi@Dim7T

usernam

admin passwor

admin

usernam

service passwor

service

56. You are deploying a RecoverPoint cluster into an existing VPLEX environment. You want to validate the following conditions: -VPLEX splitters are installed -All VPLEX splitters are the same version -VPLEX splitter status. In addition, you want to verify that the VPLEX management server can reach all of the attached RecoverPoint clusters.

How can you verify all the information?

Use VPLEX CLI to run rp validate-configuration

Use VPLEX CLI to run rp verify-configuration

Use RecoverPoint CLI to run rp validate-configuration

Use RecoverPoint CLI to run rp verify-configuration

57. What is the maximum number of copies of production data supported with RecoverPoint?

Four remote copies

One local copy and four remote copies

Two remote copies

Two local copies and two remote copies

58. Which RecoverPoint family is licensed per array and array capacity?

RecoverPoint/EX only

RecoverPoint/SE

RecoverPoint/CL only

RecoverPoint/EX and RecoverPoint/CL

59. What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

60. What is the primary function of the journal volume in EMC RecoverPoint?

Store compressed copies of data

Record data changes before they are replicated

Act as a buffer for incoming data

Store metadata regarding data replication

Page 7 of 8

61. What Installation Manager menu selections would you make to view the RPA PWWNs?

3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports

3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details

3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs

3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity

62. Which RecoverPoint tool will recommend the preferred RPA you should assign to each Consistency Group?

Balance Load

Detect Bottlenecks

Collect System Information

Manage Event Filters

63. When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

Volumes that are all close to the same size

Volumes masked to the production host

Any volume less than 10 GB

Only thin LUNs

64. A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR site.

RP will be protecting three datastores:

- A thick 100 GB LUN containing 60 GB of data

- A thin 50 GB LUN containing 15 GB of data

- A thick 75 GB LUN containing 75 GB of data

How much of the user data is being replicated to the DR site?

150

185

190

225

65. What are key use cases for RecoverPoint?

Disaster Recovery, Operational Recovery, and Data Migration

Disaster Recovery and Operational Recovery only

Disaster Recovery and Data Migration only

High Availability Solution Implementation

66. A company is currently using RecoverPoint/SE in their environment. They have purchased a VMAX which will be deployed to replace a VNX splitter at one site only.

What must be done before they can use the VMAX with RecoverPoint (RP)?

Obtain an updated license that will support RP/EX or RP/CL

Use Unisphere for RecoverPoint to convert from RP/SE to RP/EX or RP/CL

Purchase and use a VMAX at the other site

Deploy an updated splitter on the existing array that will function with the new VMAX splitter

67. How does RecoverPoint ensure data consistency during replication?

It uses write-order fidelity

It relies on array snapshots

It timestamps each write operation

It synchronizes the system clock

68. RecoverPoint support has asked you to collect logs from your RecoverPoint system.

After the log collection process is complete, which user account is used to access the log file for download?

admin

webdownload

boxmgmt

security-admin

69. A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

Use a Distributed Consistency Group

Add one RPA to the Primary site

Use the Consistency Group on both RPAs and add two RPAs to the secondary site

Add one RPA to the DR site

70. A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

They can only use physical RPAs in the current environment.

For performance reasons, they can mix vRPAs and physical RPAs in the same RPA cluster, but only at remote sites.

For performance reasons, they cannot mix physical and vRPAs within an RPA cluster.

They can mix vRPA and physical RPAs in the same RPA cluster at all sites.

Page 8 of 8

71. What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM)?

Enables coordinated failover of virtual machines and their storage

Eliminates hardware dependencies when using heterogeneous storage with VMware

Enables replication of individual virtual machines without the need to replicate an entire VMFS volume

Enables full protection of VMware ESXi servers

72. What role does the Write Splitter play in a RecoverPoint deployment?

It encrypts data before it is replicated.

It divides incoming writes between the primary and journal volumes.

It ensures that only new changes are written to the journal.

It acts as a gateway between the production data and the backup system.

73. A company recently acquired a new DR site and requires their production data to be replicated to this DR site.

What is an important consideration about the RecoverPoint out-of-band architecture?

Performance on the production site is not impacted.

Site-to-site connectivity needs to be based on Fibre Channel.

Maximum asynchronous replication speed is 400 MBps.

Maximum synchronous replication speed is 400 Mbps.

74. A company is currently using RecoverPoint/SE in their environment. They have purchased a VMAX which will be deployed to replace the VNX splitter at one site only.

What must be done before they can use the VMAX with RecoverPoint (RP)?

Use RecoverPoint Deployment Manager to convert from RP/SE to RP/EX or RP/CL

Use Unisphere for RecoverPoint to convert from RP/SE to RP/EX or RP/CL

Purchase and use a VMAX at the other site

Deploy an updated splitter on the existing array that will function with the new VMAX splitter

75. A VPLEX write splitter can be shared with how many RecoverPoint clusters?

76. Which command displays RPA hardware platform information?

get_rpa_states

get_system_status

get_system_settings

get_rpa_statistics

77. Which statement is true about Logged Access mode?

RecoverPoint will roll back (or forward) the snapshots until the selected image is reached.

RecoverPoint creates a virtual disk by pulling the needed data either from the snapshots or from the storage.

RecoverPoint will retrieve the snapshot from the Image Access log.

When Logged Access is disabled, all writes made to the image will be saved to the journal.

78. A customer is interested in implementing a RecoverPoint solution using a four-node cluster with physical RPAs.

How many total IP addresses are required for the cluster?

TAGS:

D-RP-DY-A-24, D-RP-DY-A-24 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Inline Feedbacks

View all comments

Posts

DELL EMC Free Dumps

Get D-RP-DY-A-24 Dumps Full Version

Q&As: 260
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

2024 DELL EMC D-RP-DY-A-24 Exam Dumps Questions

Related

Posts

D-VXB-DY-A-24 Dumps Guarantee You Pass D-VXB-DY-A-24 Exam Easily

Study Online D-CS-DS-23 Exam Dumps to Pass

D-MN-OE-23 Online Dumps Boost Your Career

Get Certified Easily with Online D-PSC-DY-23 Dumps

About Us

EMAIL

Services

Opening Hours