D-NWR-DY-23 Dumps Questions Increase Your Chance of Success

1. What is a characteristic of Dell EMC NetWorker virtual synthetic full backups?

2. What is done to enable load balancing of EMC NetWorker backups across multiple storage nodes?

3. Where is a vProxy VM configured when setting up a NetWorker VMware Protection environment using NMC?

4. An EMC NetWorker customer wants to perform a complete backup of a SQL server with three databases.

Which save set name should be used?

5. What is a requirement for performing a synthetic full backup?

6. Which databases are referred to as tracking databases?

7. What are categories of Console database data retention?

8. What is used to configure and start the CLP/ELMS license server service on a Linux host?

9. In a Dell EMC NetWorker environment, the daily scheduled backup was started. However, the backup failed without mounting the device.

What is a possible reason for the failure?

10. What is a characteristic of an instant recovery with Dell EMC NetWorker VMware Protection?

11. Client_A is a client in an EMC NetWorker environment. There are two EMC NetWorker servers: Server_A and Server_B. Server_A is local to Client_A while Server_B is located across a WAN. In addition, there is one storage node, StorageNode_B, defined on Server_B.

You notice that there are no entries in the /nsr/res/servers file on Client_A.

Which system is allowed to back up data from Client_A?

12. A backup administrator is testing a block-based backup of a Linux server that is supported by Dell NetWorker, and the backup fails.

What is the cause of the failure?

13. What option for cloud backup devices allows to limit the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

14. Which type of computing and storage environments does EMC NetWorker protect?

15. What is a consideration when configuring a client backup with Checkpoint Restart enabled?

16. A customer wants to use REST API to manage their Linux-based NetWorker backup server.

How should the administrator respond?

17. A Lotus Notes administrator wants to perform backups of their Partitioned Domino servers. They are planning to deploy NMDA.

What objects can be backed up at the incremental level?

18. What provides EMC NetWorker administrators with the information necessary to undo changes that were made to the NetWorker configuration?

19. An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has disabled one of the LTO-4 drives.

How many nsrmmd processes are now running on the EMC NetWorker storage node?

20. You have an EMC NetWorker backup group containing 10 clients. Each client will be backed up at either Level Full, Incremental, or Cumulative Incremental every day. The backup level for each is controlled by the schedule applied at the client level. All clients belong to the same protection group.

What is the most efficient method to force an immediate Full backup of all clients?

21. A new full backup is created using previous incremental backups only

22. When performing a server-initiated backup, which EMC NetWorker command is run by the policy framework and issues a remote execution request to clients?

23. How should this be enforced?

24. A Dell EMC Networker administrator is protecting a VMware environment with Networker vProxy appliances and needs to perform a recovery.

Which recovery method will create a new virtual machine running directly off the backup image?

25. What are the requirements to access the NMC UI?

26. In EMC NetWorker, what best describes the source capacity licensing model?

27. An EMC NetWorker administrator wants to set a full level backup for the first Friday of each month.

How can the scheduling be configured in NetWorker?

28. A backup administrator has configured three clients for backup on a newly installed EMC NetWorker server. The administrator has configured a workflow to back up the clients at 6 P.M. each day.

The schedule specifies a synthetic full backup on Sunday and incremental backups the rest of the week. After two days, they notice that the client file indexes for these clients are not being backed up.

What is the reason for this issue?

29. What is the key performance tuning feature that determines the amount of multiplexing when writing to a tape device?

30. Using the EMC NetWorker directive listed below, what happens to all files under /export/home?

<< / >> +compressasm: .

<< /export/home >> forget ignore

31. A backup administrator has been tasked with installing the NetWorker Module for Meditech on a host used by a hospital.

Which NetWorker installation package provides the additional feature support for this module?

32. What is the backup command specified in the EMC NetWorker client resource for EMC Centera backups?

33. Refer to the Exhibit.





Which EMC NetWorker daemon is represented by "C"?

34. What is a supported action sequence for traditional workflows in Dell EMC NetWorker?

35. A Dell EMC NetWorker backup administrator is configuring a new backup workflow.

In addition to Backup Traditional, what are supported action types for traditional backup workflows?

36. Which policy in EMC NetWorker determines the length of time that records are retained within the Client File Index (CFI)?

37. What is a characteristic of EMC NetWorker volume cloning?

38. When EMC NetWorker is integrated with a Data Domain system with DD Boost, which component reviews the data stored on the Data Domain and sends only the unique data for storage?

39. What is a consideration for using the Dell EMC NetWorker block based backup feature?

40. What is a consideration when using the Dell EMC NetWorker block based backup feature on Microsoft Windows?

41. Bootstrap save set is cloned.

42. Which EMC NetWorker daemon manages device operations on a storage node on behalf of the nsrd process?

43. A Dell EMC NetWorker administrator is considering using either a CloudBoost or a Data Domain Cloud Tier solution.

What is a function of only CloudBoost?

44. NMDA for Oracle supports which levels of incremental backups?

45. Which EMC NetWorker feature specifies the maximum number of simultaneous save streams that can be sent to a device?

46. A company wants to use the Dell EMC NetWorker User for IBM Domino tool to perform manual backup and recovery operations.

Which operating system is required to use this tool?

47. Which binary is present on a host when the EMC NetWorker client software is installed?

48. When the nsrd process is started, in which database does the Dell EMC NetWorker server look for licenses?

49. A Dell EMC Networker Administrator always wants to perform a backup of the cluster virtual client data to its local storage node device.

How can this be achieved?

50. Two Windows file servers are being configured for backup in a newly installed EMC NetWorker environment. In the past, backup of the file servers has taken a long time due to the dense file systems and small directory counts.

What should be configured to perform the most efficient backup of these servers?

51. A Dell EMC NetWorker backup administrator runs a client-initiated save backup with option-1 incremental.

Which backup level is displayed during this backup?

52. Which URL syntax is correct for NWUI?

53. In an EMC NetWorker storage node with four stand-alone LTO tape drives, which daemons must be running?

54. What is characteristic of Dell EMC NetWorker Module for Databases and Applications (NMDA) with Sybase?

55. A backup administrator wants to verify that data was successfully written to an AFTD.

Which window in NMC would the administrator select to go gather this information?

56. An EMC NetWorker administrator on an UNIX terminal wants to monitor volume mount requests.

Which NetWorker Administrative interface is recommended?

57. When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service must be restarted on the client for the change to take effect?

58. How does EMC NetWorker respond to an AFTD disk full condition?

59. What applications are supported with NSM integration with Protect Point?

60. Which are NetWorker modules?

61. What is a benefit of using vendor-specific API during a Dell EMC NetWorker Module backup?

62. In EMC NetWorker backup environment, server parallelism is set to 8 as shown in the exhibit.





How many save sessions will be directed to each device?

63. What is a supported CloudBoost configuration with Dell EMC NetWorker and a public cloud provider?

64. By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator.

Which configuration change is required to redirect the reports to the printer?

65. Your Windows environment consists of several EMC NetWorker servers on the same subnet that are responsible for backing up only specific clients for security reasons. You need to change one backup client’s “parent” NetWorker server from NWServer-A to NWServer-B.

Which file do you need to change in order to ensure only NWServer-B can back up this client?

66. In EMC NetWorker, what is a benefit of using multiplexing with backups to tape?

67. What is the selection hierarchy used in determining to which EMC NetWorker pool data is sent?

68. An EMC NetWorker customer wants to clone save sets from an EMC Disk Library (EDL) to a physical tape library. The customer requires full catalog tracking with minimum SAN utilization.

Which solution best satisfies these requirements?

69. Which daemon is responsible for organizing backup data before it is written to the backup media?

70. Which Microsoft technologies are supported with block based backups with the Dell EMC NetWorker Module for Microsoft?

71. What is used by a VMware end-user to restore the image-level protected virtual machine with the Data Protection Extension plug-in for Dell EMC NetWorker?

72. Which applications are supported by NMDA?

73. You are implementing an EMC NetWorker backup solution for a Microsoft SharePoint 2010 distributed farm. The customer has indicated that a SharePoint granular level recovery is required.

Which backup solution needs to be implemented?

74. What is an EMC NetWorker host ID called in a clustered EMC NetWorker server?

75. When recovering data from the Cloud Tier with Dell EMC networker, how long is the data retained on the Data Domain device?

76. A Dell EMC NetWorker backup administrator has configured Data Domain Cloud Tier for long-term retention with ECS cloud. After setting up the data movement policy in NetWorker, the administrator discovers that the save set has not moved to their cloud even after cloning completed successfully.

What is a possible reason for this issue?

77. What OS does the NetWorker vProxy Appliance run?

78. What is the difference between a full and a consolidated backup?

79. An EMC NetWorker server has been configured to stage from an adv_file type device upon reaching a high water mark of 80%.

After the staging begins, which rule determines when the staging process ends?

80. An administrator is configuring a backup environment and requires the following:

- Eliminate storage node bottlenecks

- Reduce the number of network hops

Which Dell EMC NetWorker feature should be used?

81. You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.

What must be done to back up the data on the Celerra?

82. What cloud solution is designed for situations where workloads are running entirely in the cloud?

83. You are deleting save sets manually from the EMC Net Worker server using CLI commands. You receive an error that the database update has failed.

What process should you verify is running on the Net Worker server?

84. What is a benefit of using multiplexing with EMC NetWorker backups?

85. A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.

Where will the tracking information for all save sets backed up in the group be stored?

86. By default, where are backups written to when using NetWorker?

87. A company has both short-term backups and long-term backups for compliance.

What cloud solution can be used to backup all applications and data workloads?

88. What is the default location of the NMC database on a Linux host?

89. An EMC NetWorker storage node is connected to a Data Domain system with virtual tape library configured.

Which device type should be configured on NetWorker?

90. What is a characteristic of a CloudBoost appliance?

91. What is the valid option for the mminfo command to display information about the NSM snapshot save sets?

92. In Dell EMC NetWorker Module for Microsoft with Hyper-V, how are incremental backups stored on a Data Domain device?

93. While creating a Microsoft VSS snapshot in an EMC NetWorker environment, what is performed by a Provider?

94. What application does the Enhanced Server Recovery option in EMC NetWorker allow us to interact with?

95. What types of IDS logical log backups are supported with NMDA for Informix?

96. An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system

Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?

97. In an EMC NetWorker environment, which two ports will nsrexecd always try to listen on?

98. Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?

99. When connecting to an EMC NetWorker console server from a different host, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the EMC NetWorker console server. However, the error message remains.

What needs to be done to resolve the problem?

100. What does an EMC NetWorker directive do?

101. Which NetWorker server policy backs up the CFI?

102. What is a characteristic of backups with the EMC NetWorker Module for SAP?

103. What is used to configure and start the CLP license server service on a Linux host?

104. After adding a few clients over a number of weeks, the backups have been queuing up and going past the backup window. The administrator has been asked to review and adjust NetWorker configuration to allow enough sessions, so the backups complete on time without going into the queue. Clone window is not a concern at this time.

They checked the configuration and have determined the following.

Server Parallelism = 80

Number of devices = 9

Backup devices = 6

Clone devices = 3

Target session on each device = 4

Max session on each device = 8

There is a total of 21 clients, each with a client parallelism = 4

After doing the calculations, what needs to be done?

105. A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.

What type of device should the backup administrator configure?

106. When connecting to an EMC NetWorker console server running on Solaris, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the NetWorker console server.

However, the error message remains.

What needs to be done to resolve the problem?

107. What is a characteristic of VCB backups in EMC NetWorker?

108. An administrator needs to use a Data Domain with DDBoost Option in an EMC Networker environment.

Which license(s) must be added on the EMC NetWorker Server?

109. Which EMC NetWorker command line tool is used to modify both the Media database and client file indexes?

110. An EMC NetWorker administrator wants to perform an online backup of Lotus Domino Server running on Windows 2008 Operating System.

Which solution should be used?

111. EMC NetWorker is using a library controlled by an ACSLS server. Information about a tape volume was accidentally deleted from the media database.

What is run to recover the information?

112. Refer to the exhibit.





A backup administrator configures an EMC NetWorker staging policy to move save sets from backup Device A to backup Device B. A restore session is started and requires save sets that were staged to Device B.

What is the data flow in this recovery?

113. An EMC NetWorker administrator installed the NetWorker client software on a Microsoft Windows server that needs to be backed up. The Networker device resource is already configured. However, the administrator is still unable to perform a backup of this client.

Which other step needs to be taken to perform a backup successfully?

114. What is a consideration when deploying a Dell EMC NetWorker client in a clustered environment?

115. What is an advantage of using backup from within the cloud with Dell EMC NetWorker and a CloudBoost appliance?

116. A Dell EMC NetWorker server has been configured to stage from an AFTD upon reaching a high water mark of 80%.

After the staging begins, which rule determines when the staging process ends?

117. Which process needs to be running on each EMC NetWorker client?

118. An administrator added several new LDAP user accounts for backup configuration and monitoring tasks. The LDAP users have been authenticated in NetWorker Management Console (NMC).

What must be done so that these tasks can be performed on the Dell EMC NetWorker server?

119. Which administrative interface provides a global view of multiple NetWorker servers that are involved in a backup environment?

120. A backup administrator needs to find out if a file was backed up.

Which command should be used to perform this task?

121. Which feature of EMC NetWorker allows multiplexed, heterogeneous data to reside on the same tape?

122. Refer to the exhibit.





A backup administrator on Windows HostA needs to administer the EMC NetWorker server: ServerX. The administrator will use a web browser to connect to the console server on ServerY and log in to the NetWorker Management Console using the default administrator credentials.

What needs to be included in the Administrator list of the NetWorker server?

123. Which command is run on the EMC Net Worker server to recover the server's Client File Index from available backup media?

124. Which window in NMC would the EMC NetWorker backup administrator select to configure a new remote storage node?

125. An Administrator needs to back up a Windows file server that has a million small files in a high density file system.

What is the best way to fulfill the Administrator’s requirements?

126. If a NetWorker backup is using a dedicated storage node, what is responsible for storing the tracking information?

127. A Dell EMC NetWorker administrator wants to back up all data residing on a cluster which consists of two physical nodes with one virtual service. The cluster is in an active/passive configuration.

Where must the NetWorker client software be installed?

128. When using Microsoft VSS snapshot processing in an EMC NetWorker environment, what is performed by a Writer?

129. What is a benefit of the EMC NetWorker remote device support feature?

130. Which EMC NetWorker command can be run to list all files currently tracked in the Client File Index for a particular client?

131. What needs to be configured for EMC NetWorker to properly communicate with the clients?

132. A backup administrator is configuring Dell EMC NetWorker to use Data Domain Cloud Tier devices. During the configuration, a message appears that the Data Domain data movement policy will be updated to an app-based policy.

What is a function of the app-based policy?

133. Which EMC NetWorker settings control the amount of multiplexing in a tape environment?

134. What is one of the features available with VADP (vStorage APIs for Data Protection) in EMC NetWorker?

135. When using Dell EMC NetWorker Windows Bare Metal Recovery, what is the requirement for the startup herd disk capacity of the target system?

136. An administrator is configuring Dell EMC NetWorker for a client. They configured 2 NetWorker service ports. The backup is failing.

What needs to be corrected?

137. An EMC NetWorker administrator needs to recover a client file index.

What needs to be executed in order toretrieve this information?

138. What is an advantage of integrating Dell EMC NetWorker Snapshot Management with ProtectPoint?

139. A company has a Dell EMC NetWorker client that is running a non-standard database. The database REDO log files are currently backed up once a day with a traditional backup.

The database administrator has a new requirement to back up the REDO logs four times a day.

Where is this configured?

140. Which backup level requires the fewest number of volumes to restore?

141. 1.Which option for cloud backup devices allows limiting the bandwidth that EMC NetWorker consumes for cloud operations during specified periods of time?

142. A backup administrator was asked to configure a Microsoft Exchange server.

To which two types of devices can this backup be directed?

143. Which command is used to back up Microsoft-based applications using Dell EMC NetWorker?

144. Which Dell EMC Networker daemon manages device operations on a storage node on behalf of the nsrd process?

145. A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN scripts and a proxy host.

What prevents this implementation from being successful?

146. What port is required tor NMC access?

147. You have been tasked to move the EMC Net Worker Management Console (NMC) from the EMC Net Worker server to an alternate server.

To utilize the new server as an NMC, what is the complete list of software that needs to be installed?

148. By default, what triggers the backup of the Dell EMC NetWorker bootstrap?

149. Refer to the exhibit.





To which EMC NetWorker pool is the client save set backed up?

150. An EMC NetWorker Administrator needs to restore a client file. However, the save set for that backup is in a recoverable state.

What must be done before performing a browsable recovery?

151. Refer to the exhibit.





A Dell EMC NetWorker administrator is monitoring Cloud Tier save sets.

What does the "T" flag in the clone flags column represent?

152. Which method would you use to recover a file to its same location when the entry for that file no longer exists in the client file index?

153. What resource does NetWorker use to protect VMware objects, save sets, or clients?

154. What is the first step in the process for information protection using snapshots?

155. In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.

What should be considered to avoid backing up the same data twice?

156. When a user logs into the Dell EMC NetWorker Management Console (NMC) server, what provides token-based verification of NMC and CLI users?

157. You are backing up a group of clients that have varying schedules. Using the EMC Net Worker administrator interface, you need to perform a full backup of all clients in that group.

Using the Net Worker administrator how would you ensure all clients back up full on the next save group execution?

158. What happens when an EMC NetWorker file type device becomes full while backups are running?

159. In an EMC NetWorker environment with a single datazone, which EMC NetWorker software component would you install on hosts that manage backup devices?

160. An EMC Net Worker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has put one of the LTO-4 drives in Service mode.

How many nsrmmd processes are now running on the EMC Net Worker storage node?

161. Which command must be used to recover the NMC database only?

162. Refer to the exhibit.





How many nsrlcpd processes are running on the EMC NetWorker server?

163. Which daemon supports remote execution requests for backup requested by EMC NetWorker Management Console?

164. A backup administrator needs to upgrade NVE. To which folder on the NVE appliance must the upgrade package be copied before starting the upgrade?

165. In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon, nsrd?

166. In an EMC NetWorker environment, a clone volume (physical tape) required for a recovery is not currently mounted.

Which attribute is consulted first to determine the storage node used for the recovery?

167. What is the command line alternative to perform a query and generate a report similar to the reports generated within the EMC NetWorker Management Console (NMC)?

168. A system administrator wants to deploy a CloudBoost appliance to Microsoft Azure to extend on-premise data protection.

What are the recommended WAN requirements for the deployment?

169. A backup administrator wants to skip backing up media files in various user directories on a Microsoft Windows client. The media files all have extensions of “WAV”, “AVI” or “MP4”.

A global directive is created as shown below and applied to the client resource.

« / »

skip: *.wav *.avi *.mp4

After the next full backup, the administrator notices that none of the media files were skipped.

Why were they media files backed up?

170. You have a requirement to set up a NAS appliance into the EMC NetWorker environment. You have the remote username and passwords as well as the Fully Qualified Name (FQN) for the device and you wish to ensure that the NetWorker server can see the NDMP devices before the setup.

Which command should be used to do this?

171. A Dell EMC NetWorker administrator is unable to assign a protection group to a workflow. During the configuration, the drop-down does not list that group as a selection.

What is a possible reason for the missing group?

172. Consider the EMC NetWorker directive:

<< / >> +compressasm: .

<< /export/home >> forget ignore

What is the result of this directive?

173. Which type of Microsoft SQL VSS backup is supported by NetWorker Module for Microsoft?

174. An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four.

How is data written to the advanced file type device?

175. What are characteristics of the Dell EMC NetWorker Client File Index (CFI) and the media database?

176. Using EMC NetWorker Module for Microsoft Applications, an EMC NetWorker administrator backs up a Microsoft Exchange server which resides on an EMC CLARiiON disk array.

What best describes supported features in this case?

177. What action must be taken before NetWorker can support a bootstrap backup from a Cloud Tier device?

178. What is the first step that occurs during a client initiated backup?

179. A NetWorker workflow is configured as a probe-based backup What actions must be included in the workflow?

180. Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?

181. In EMC NetWorker, which daemon provides the read and write service for the CFI database?

182. An EMC NetWorker administrator wants to create a new custom notification. The notification needs to send an e-mail with a critical severity when a backup failure of a savegroup occurs.

Which attribute causes the notification to be sent when the backup fails?

183. Refer to the exhibit.





What is the purpose of the Change Browse Time window when performing a recover in EMC Net Worker User?

184. Which log file contains the file restore information when a recover is performed using the NetWorker User program?

185. When backing up an Oracle database with EMC NetWorker Module for Databases and Applications, how is the Oracle backup level determined?

186. What is the EMC NetWorker nsraddadmin command used for?

187. When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?

188. A Dell EMC NetWorker backup administrator wants to run a clone after backing up their Microsoft Windows clients.

Which configuration will combine the backup and clone?

189. An EMC NetWorker backup administrator wants to use a single interface to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker. They are also looking for capacity planning information for the various components in the environment.

Which EMC tool is recommended?

190. Which command can be used to recover an EMC NetWorker Management Console database?

191. A Dell EMC NetWorker backup administrator wants to generate a list of monthly backups from the command line.

Which command can be used to perform the operation?

192. What is the correct sequence of events in a scheduled backup workflow using Dell EMC NetWorker Module for Databases and Applications (NMDA)?

193. What is the default port number for the Dell EMC NetWorker server to authenticate the NMC server host?

194. An administrator wants to perform a directed recovery using EMC NetWorker.

What is a requirement?

195. A backup administrator is implementing an EMC NetWorker backup solution for an Oracle database running on Microsoft Windows.

Which backup command is used?

196. When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?

197. An EMC NetWorker client has a network connection with direct access to a Data Domain Boost (DD Boost) storage device. The client’s 3 TB data disk is 98% full with 0.05% daily change rate. During the backup window the client’s CPU is 80% busy and the client's network interface is 7% busy.

Should Client Direct be recommended for this client?

198. What is a consideration when configuring an EMC NetWorker probe-based backup?

199. What is the size of the CFI entry a backed-up file will create?

200. A backup administrator wants to exclude all user temp directories during backups.

How can this be implemented using EMC NetWorker?

201. Which deduplication solution is supported within a NetWorker environment?

202. Which EMC Net Worker process reads and manages the port range information?

203. Which Dell EMC NetWorker database allows an administrator to browse backup details for a particular point in time?

204. A backup administrator is protecting a VMware environment with Dell EMC NetWorker and Data Domain systems.

Which component serves as the Data Mover of the virtual machine backup data between the VMware datastore and Data Domain system?

205. In Dell EMC NetWorker, what is a characteristic of a probe-based backup?

206. After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?

207. An EMC NetWorker Administrator needs to be able to back up and recover a high density active file system to the backup devices connected to local or remote storage nodes.

208. An EMC NetWorker administrator wants to find all the files within a save set that are still browsable by the client.

Which command will allow the administrator to perform this task?

209. In order to license the vRealize Data protection extension for the Dell EMC NetWorker plug-in, where must the license be applied?

210. What are the primary types of Dell EMC NetWorker hosts in a datazone?

211. You have been tasked to protect a newly configured Microsoft SQL server residing within a two node cluster. The following requirements must be met: Backups must be performed daily. All data must be transmitted over the LAN. Hot backup must be performed automatically regardless of which node the virtual server resides on at the time of backup.

What software is required to achieve this?

212. What are supported private cloud storage providers for CloudBoost?

213. An EMC NetWorker administrator wants to allow multiple tenants to share a single NetWorker data zone without purchasing any additional licenses.

What solution will address the administrator’s needs?

214. In an EMC NetWorker environment, Auto Media Management is currently enabled on the autochanger. The customer requires unlabeled volumes in the autochanger to be used before recyclable volumes are reused.

In addition, the unlabeled volumes need to be automatically labeled before they are used.

How can this be achieved?

215. Which Microsoft application is supported by EMC NetWorker Module for Microsoft using both VSS and VDI technologies?

216. A Dell EMC NetWorker administrator configured their backups for save set "C:Users" to run daily at 12:00 PM with levels based on the exhibit.





At 1:00 AM on Day 3, file "C:UsersJohnmyscript.txt" was deleted. At 5:00 PM on Day 4, folder "C:UsersJohn" was renamed to "C:UserJohn_old".

On Day 7, the administrator decided to recover the entire save set back to Day 6. Based on this environment, which result can be expected?