Get Certified Easily with Online C1000-058 Dumps

Category:

IBM Free Dumps

Comments:

0 Comments

Post Date:

February 29, 2024

Using IBM MQ V9.1 System Administration C1000-058 questions can help you build confidence as you prepare for the exam. By practicing with these C1000-058 dumps questions, you will be better prepared and more confident when you take the actual exam. Besides, C1000-058 exam dumps questions cover a wide range of topics that are relevant to the certification exam. By using C1000-058 dumps questions, you will be able to ensure that you have a comprehensive understanding of the material covered on the exam. Practice free IBM C1000-058 exam dumps below.

Page 1 of 6

1. In the context of Availability, what is the purpose of a "Hot Standby"?

A backup system that is immediately available to take over if the primary system fails

A backup system that is warm and requires some initialization to take over

A redundant system that is always offline until needed

A backup system used for non-critical applications only

2. What is the extension is used for IBM MQ FFST reports?

dmp

fdc

fst

ffst

3. What does the term "Alert" refer to in the context of system monitoring?

Detailed log of system events

Notification of potential issues or failures

Complete system backup

Snapshot of system configurations

4. What does "Phishing" typically involve in the context of cybersecurity?

Infecting systems with a virus

Gaining unauthorized access to a network

Deceiving individuals to reveal sensitive information by posing as a trustworthy entity

Physical theft of hardware devices

5. What does the term "Change Management" relate to in Configuration?

Documenting historical system changes

Ensuring all configurations are static

Managing the process of modifying configurations in a controlled manner

Tracking network speed changes

6. The behavior of the automatic client reconnection functionally provided by the IBM MQ classes for JMS depends on the properties being set for client reconnection.

What is one of the properties that needs to be set?

CCT

TTP

TRAN

MULTI

7. An administrator has been asked to make changes to MQ config so that the MQ client application APP_A connecting to queue manager QM1 can reconnect automatically without re-starting the applications.

What does the administrator need to configure to achieve this?

Alter QMGR and set the attribute RECONN(YES)

Alter SVRCONN channel and set attribute AUTOCONN(TRUE)

Configure DefRecon attribute of CHANNELS stanza in mqclient.ini

Configure AutoConnect attribute of CHANNELS stanza in mqclient.ini

8. What is the purpose of Geographical Redundancy in ensuring system availability?

Maintaining multiple copies of data within the same location

Storing backup data in a different physical location

Using multiple data centers for faster data access

Reallocating resources for optimal performance

9. Which MQSC command is used to create a local queue in IBM MQ?

CREATE QUEUE

DEFINE QUEUE

MAKE QUEUE

SETUP QUEUE

10. What setting of the MONQ attribute should be used to stop capturing monitoring data for all queues on the Queue Manager?

OFF

NONE

FALSE

DISABLE

Page 2 of 6

11. What topic attribute/value pair controls delivery of all non-persistent publications to all subscribers?

NPMSGDLV(ALL)

NPPUBDLV(ALL)

MSGDLV(NPSISTALL)

PUBDLV(NPSISTALL)

12. What is the purpose of a Configuration Item (CI) in Configuration Management?

Identifying unique users in a system

Documenting software versions

Tracking and managing individual system components

Managing network protocols

13. Which object type is used to define the maximum size of a message on a queue manager?

Queue Manager

Queue

Channel

Listener

14. Which statement is true regarding trace-route messaging?

It cannot be used for a clustered queue manager

It collects MQI activity information

It detects the latency of messages going through a queue manager

It is a technique that involves sending an IBM MQ trace-route message into a queue manager network

15. What is the purpose of Load Testing in performance tuning?

Assessing system configuration changes

Evaluating system responsiveness under normal conditions

Analyzing system log files

Assessing system behavior under peak workloads

16. Which term describes the ability of a system to continue operating despite hardware or software failures?

Redundancy

Fault Tolerance

Scalability

Efficiency

17. What is the primary purpose of a "Runbook" in IT installation?

Documenting system configurations

Outlining procedures for system operation and maintenance

Documenting user manuals

Recording system log files

18. Which type of channel in IBM MQ is used for bidirectional communication with client applications?

Server-Connection Channel

Sender-Receiver Channel

Requester Channel

Client Channel

19. What is the primary purpose of a rollback plan in IT migration?

Reverting back to the original system state in case of migration failure

Scheduling a system update for a later date

Documenting user feedback post-migration

Planning for a phased migration approach

20. If the channel attribute for USEDLQ is set to NO, what behavior would occur for messages?

The channel will store all failed messages.

The channel will not support XA transactions.

Messages that cannot be delivered by a channel are treated as a failure.

If the queue manager DEADQ attribute provides the name of a dead-letter queue, then it is used.

Page 3 of 6

21. QM1 is a multi-instance queue manager on server1 and server2. Currently, it is NOT running.

What is the effect of executing strmqm -x QM1 on server1?

QM1 becomes an active instance on server2.

QM1 becomes an active instance on server1.

QM1 becomes an active instance on server1 and a standby instance on server2.

QM1 becomes an active instance on server2 and a standby instance on server1.

22. In problem determination, what does "Isolation Testing" involve?

Testing software compatibility with the system

Identifying the exact component causing the issue by systematically eliminating other possibilities

Documenting system changes

Analyzing user login patterns

23. Which command is used to start a queue manager?

RUN MQM

START QMGR

BEGIN QMGR

INIT QM

24. An Application Developer is using a Unix queue manager and wants to know if the queue manager is set as the default.

Where can this information be found?

qm.ini

mqs.ini

With the MQSC command: DIS QMGR

Using the command showQueuemanagerDetails

25. Which channel may be configured with a channel auto-definition exit?

Sender Channel

Receiver Channel

Requester Channel

Client-Connection Channel

26. What is the purpose of the AMQERR01.LOG file in IBM MQ?

Stores error and problem records

Archives completed message transactions

Records incoming message acknowledgments

Manages queue depth information

27. In application triggering what is the role of trigger monitor process?

It monitors the initiation queue and based on trigger message issues a command to start an application.

It monitors the transmission queue and based on trigger message issues a command to start an application.

It monitors the application queue and when the trigger conditions are met and issues a command to start an application.

It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.

28. In server administration, what does the term "uptime" refer to?

Time taken to start a server

Duration a server is operational and available

Time allocated for server maintenance

Number of users accessing the server

29. Which metric is commonly used to measure data transfer speed in storage devices during performance tuning?

Bandwidth

Latency

IOPS (Input/Output Operations Per Second)

Throughput

30. What is the role of a Cluster Receiver Channel in IBM MQ?

Distributes messages within a queue manager

Receives cluster information from other queue managers

Transmits messages to cluster members

Monitors communication among clusters

Page 4 of 6

31. What is the role of a "Problem Management Process" in problem determination?

Resolving incidents as quickly as possible

Identifying system improvements and preventing future incidents

Documenting user complaints

Monitoring system performance in real-time

32. Which attribute specifies the maximum number of uncommitted messages that can reside on a queue in IBM MQ?

MaxInflight

MaxMsgs

MaxUncommitted

MaxDepth

33. What does "MTBF" stand for in the context of system availability?

Mean Time Before Failure

Maximum Time for Backup Failure

Minimum Time Between Faults

Mean Total Backup Failures

34. An administrator is asked to forward all messages to queue ‘TEST.TEMP’ if the messages destined for ‘TEST.LOCAL’ end up on the dead letter queue.

Which rule in the dead letter handler rules table will enable the administrator to achieve this objective?

REASON(MQRC_Q_FULL) ACTION(FWD) FWDQ(&DESTQ) HEADER(NO)

REASON(*) ACTION(FWD) FWDQ(‘TES

TEMP’) HEADER(NO) DESTQ(‘TES

LOCAL’)

REASON(*) ACTION(RETRY) FWDQ(‘TES

LOCAL’) HEADER(NO) INPUTQ(‘TES

TEMP’)

REASON(MQRC_Q_FULL) ACTION(IGNORE) FWDQ(‘TES

TEMP’) HEADER(NO) DESTQ(‘TES

LOCAL’)

35. What is the purpose of a "Configuration Management Plan"?

Documenting hardware serial numbers

Outlining the strategy and procedures for managing system configurations

Tracking software licensing information

Recording user login activities

36. In IBM MQ, what does a Channel Exit provide?

Encryption for transmitted messages

Compression for message payloads

Customized processing for message flows

Secure authentication for channel connections

37. A business application has been removed from the mqm group but still has privileged authority through OAM access grants. The MQ administrator must delete the authorizations that grant administrative access to the queue manager while retaining those that do not.

Which access grant should the administrator retain?

+crt on Queues

+all on the Command Queue

+chg on the Queue Manager

+setall on the Default Model queue

38. For MQ Appliance, which command can be used to set values in the mqat.ini?

setmqat

setmqini

setmqaut

setmqenv

39. Which attribute is used to specify the maximum size of messages that can be put on a queue in IBM MQ?

MaxDepth

MaxMsgLength

MaxSize

MsgSizeLimit

40. When configuring MQ shared queues on z/OS, where are the queue objects that represents the attributes of the shared queues held?

VSAM database

External SQL Server

Shared DB2 repository

Shared Oracle database

Page 5 of 6

41. Queue managers QM1, QM2, QM3 are part of the cluster called MYCluster. Cluster queue Q1 only has one instance hosted on QM1. An administrator has issues a following command on QM1:

SUSPEND QMGR CLUSTER(MYCLUSTER)

An application connects to QM2 and pushes a message on Q1.

Where does the message arrive?

On the queue Q1 on QM1

On the dead letter queue of QM2

On the dead letter queue of QM1

The application receives queue not available message

42. An administrator executes the following control command: crtmqm -q -d Q2 QM1

What is the effect of the above command?

The command creates default queue manager QM1 and specifies Q2 as its default transmission queue.

The command creates default queue manager QM1 and specifies Q2 as its dead letter queue.

The command creates queue manager QM1, queue Q2, and specifies Q2 as its default transmission queue.

The command creates queue manager QM1, queue Q2, and specifies Q2 as its dead letter queue.

43. What is the purpose of a "Penetration Test" in cybersecurity?

Analyzing network protocols

Monitoring user access

Assessing system vulnerabilities by simulating attacks

Encrypting system backups

44. Given the following error on an MQ server: AMQ7280: WebSphere MQ queue manager ’x’ appears unresponsive.

ln what file extension can this error be found?

*.ERR

*.FST

*.FDC

*.ALR

45. It is suspected that a poor programming technique has been used in coding an application that uses an MQ queue (Q1). The application puts a high volume of small messages to the queue. It has been observed that when the application is running, server CPU resource usage increases sharply.

Which command(s) will provide the administrator with the data needed to confirm or reject the poor programming technique?

ALTER QMGR STATMQI(ON)

ALTER QLOCAL(Q1) STATMQI(ON)

ALTER QLOCAL(Q1) ACCTQ(QMGR)ALTER QMGR ACCTINT(10) ACCTQ(NONE)

ALTER QMGR STATCHL(ON) STATQ(NONE)ALTER QLOCAL(Q1) STATQ(QMGR)

46. Which term describes a comprehensive snapshot of a system's configurations and settings at a specific point in time?

Baseline

Prototype

Default Setting

Blueprint

47. Which IBM MQ component ensures that messages are delivered once and only once, even in the event of failures?

Persistent Messages

Duplex Queues

Message Acknowledgment

Message Persistence

48. When using PCF commands, MQRCCF error codes are used in which operating system?

z/OS only

Linux Only

UNIX, Linux, or Windows

All supported MQ platforms

49. What is the purpose of the MQSC command 'DEFINE LISTENER'?

Establishes a channel for communication

Configures network settings for the queue manager

Defines a process for handling messages

Sets up a listener for incoming connections

50. What is the purpose of a "Configuration Baseline" in Configuration Management?

Identifying critical system configurations

Documenting initial system configurations

Establishing a standard set of configurations for reference

Storing backup configurations

Page 6 of 6

51. Which MQ object is responsible for connecting applications to a queue manager?

Channel

Queue

Listener

Process

52. In the context of performance tuning, what does "Bottleneck" refer to?

Component that limits system performance

System resource with excess capacity

Optimal system configuration

Temporary system slowdown

53. What is the role of Garbage Collection in programming languages and performance tuning?

Discarding unnecessary memory objects to free up resources

Creating new programming variables

Managing file storage

Controlling system backups

54. What does "Two-Factor Authentication" involve in cybersecurity?

Single method of user verification

Using two different types of encryption

Requiring two different forms of verification to access an account or system

Blocking access to sensitive information

55. An existing queue manager has a number of users and applications already provisioned for basic MQ access. The MQ Administrator must enable Advanced Message Security for the first time on this queue manager.

Which change must be made to the queue manager’s configuration to accomplish this goal?

Issue the SET POLICY command

Issue the SET AUTHREC command

Issue the REFRESH SECURITY TYPE(SSL) command

Issue the REFRESH QMGR TYPE(CONFIGEV) command

56. What is the primary goal of real-time monitoring in an IT system?

Analyzing historical system data

Identifying issues as they occur and taking immediate action

Documenting system configurations periodically

Backing up system logs continuously

57. How does "Recovery Time Objective" (RTO) relate to system availability?

Maximum tolerable duration for system recovery after a failure

Minimum time needed to detect system failures

Maximum duration the system can stay operational before failing

Time taken to perform system updates

TAGS:

C1000-058, C1000-058 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

IBM Free Dumps

Get C1000-058 Dumps Full Version

Q&As: 188
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Get Certified Easily with Online C1000-058 Dumps

Related

Posts

Use C1000-156 Dumps to Obtain IBM Certification

Improve Your Knowledge with C1000-168 Exam Dumps

Study Online C1000-112 Exam Dumps to Pass

Test Online C1000-162 Dumps Questions to Be Certified

About Us

EMAIL

Services

Opening Hours