Get Certified Easily with Online CSQE Dumps

Category:

ASQ Free Dumps

Comments:

0 Comments

Post Date:

June 8, 2024

Using Certified Software Quality EngineerExam CSQE questions can help you build confidence as you prepare for the exam. By practicing with these CSQE dumps questions, you will be better prepared and more confident when you take the actual exam. Besides, CSQE exam dumps questions cover a wide range of topics that are relevant to the certification exam. By using CSQE dumps questions, you will be able to ensure that you have a comprehensive understanding of the material covered on the exam. Practice free ASQ CSQE exam dumps below.

Page 1 of 6

1. As a side job: a trio of software quality' engineers developed a database management system for XYZ, a non-competing company and subsequently packaged it for commercial sale as DBM Solutions. The engineers supervisor read about the new system in a trade magazine and asked the engineers for their opinion on whether to buy DBM Solutions.

What would be the most appropriate way for the engineers to respond to this situation?

Explain their role in developing the software and ask to be excused from participating in the purchase decision.

Advise XYZ about their company's interest in the software and ask XYZ to make a presentation of the software

Advise their supervisor to buy the software., based on the fact that the product will meet the company's requirements.

Offer to examine the software, evaluate it with respect to the company’s requirements, and report on the findings

2. Which of the following measures describes the number of independent linear paths through a module?

Lines of code

Function points

Defect density

Cyclomatic complexity

3. Which of the following elements must be in place for a measure to be reliable?

A well-designed data collection form

An automated tool for calculating the measure

An operational definition of the measure

An online database for tracking the measure

4. 5-19.5

Which of the following statements describes these class intervals most accurately?

They are appropriate.

They are unrelated to the data set

They fail to describe the full range of data

They should be whole numbers since the data are whole numbers

5. Which of the following types of test coverage is most appropriate when the objective is to determine if the software has any problems handling all the required possible hardware and software designs?

State

Interface

Data domain

Platform configuration

6. A software engineer is asked to analyze the relationship between the number of defects found and the complexity of various software applications.

Which of the following is the appropriate tool to use for this analysis?

Cause and effect diagram

Control chains

Histogram

Scatter diagram

7. 1.Software security is developed to address which of the following types of communication threats?

Intentional attacks

Unintentional attacks

Physical attacks

Natural disasters

8. During the design review of several sections (modules) of software, the reviewers find an unusually high number of defects.

After defect correction and testing, which of the following can be expected of these sections?

They will be free of defects.

They might need less testing than other sections

They will need less test documentation than other sections.

They might have additional defects.

9. Which of the following measures would a project manager use to assess the team’s progress against the project schedule?

Function point metric

Earned value analysis

SMART metrics

COCOMO H Model

10. Which of the following types of meetings is structured most like a program review meeting?

Daily feedback

Scrum of Scrums

Iteration planning

Backlog refinement

Page 2 of 6

11. Which of the following sets of reviews is considered an example of a project phase gate review?

Management and retrospective reviews

Management and ready to ship reviews

Architectural design and retrospective reviews

Architectural design and ready to ship reviews

12. One of the requirements in a software quality plan is to measure the average time software performs without a problem in a production environment during regular business hours under usual workload.

This is an example of which of the following quality* attributes?

Timeliness

Availability

Performance

Reliability

13. When a product release is archived, which of the following information should be included in the archive?

Defect tracking database

Build environment and compilers

Final version of documentation only

The date the product was launched

14. One of the direct benefits of improved software quality is

an improved organizational management structure

a more disciplined development process

a reduction in the number of defects

a reduction in the tools used to evaluate the product

15. At what point in the development lifecycle should change control be implemented?

During the requirements phase

During the implementation phase

At the beginning of the design phase

When the testing phase begins

16. Which of the following diagrams is most appropriate for showing the relationship between software design input requirements and software design output?

Tree

Matrix

Affinity

Ishikay

17. Which of the following benefits is related to DevOps when it is used to facilitate development activities?

Reducing time to market

Minimizing software releases

Increasing return on investment

Standardizing organizational processes

18. Which of the following activities is classified as data collection and storage?

Installing and administering data technology

Supporting data technology usage and related issues

Confirming adequacy, uniqueness, and consistency of data

Providing mechanisms that support data availability requirements

19. A static analysis tool is used to

ensure that the system meets customer expectations

identify potential problems

trace test cases

improve the time to market

20. Conflict in teams can be useful when it

establishes decision-making patterns

speeds decision-making

produces new information

focuses management s attention on the team

Page 3 of 6

21. A software maintenance release is conducted to deliver new

features

functionality

defect corrections

software products

22. Test-driven development in extreme programming ensures the quality of code by

defining test pass criteria before code is written

defining what code modules will be tested

having the testers determine the order in which code should be written

having the code tested before the product is released

23. In the following control diagram, all paths are feasible and the decisions are not correlated to each other.

How many rests are necessary for branch coverage?

24. A cross-functional team has been established to improve the effectiveness of the inspection process. All team members have volunteered to participate and are experienced in the current process.

In this situation, the team sponsor's role should be to

provide die team with specific instructions and closely supervise its performance

explain each step before the team can take action

participate in team meetings and facilitate daily decision-making

authorize the team to make decisions and implement changes

25. According to the CMMI-DEV VI.3, how many process areas are defined for an organization at Maturity Level 2?

26. Ideas and exclusive rights for novel inventions can be protected for a limited time through

patents

copyrights

license

trademark

27. Which of the following items is an appropriate topic to be discussed in a daily scrum meeting?

A product backlog item from the current sprint and move it to future sprints

An impediment one of the team member was facing yesterday

The list of all product backlog items that need to be addressed in current sprint

A change in the product roadmap which impacts current future releases

28. Which of the following techniques would be most appropriate for identifying the source of a problem?

Affinity diagram

Root cause analysis

Prioritization matrix

Interrelationship digraph

29. Which of the following outputs is most likely to result from a sprint retrospective?

Stakeholder feedback

Refined product backlog

Product enhancement request

Continuous improvement action

30. Software inspection is best described as a process for

identifying software defects

taking corrective and preventive action to reduce software defects

evaluating the capability of software

supplementing software testing

Page 4 of 6

31. A software quality audit plan must include which of the following elements?

Resource requirements

Opening meeting minutes

Corrective action reports

Completed checklists

32. A function point analysis uses counts of which of the following elements^

Data definitions

Physical lines

Executable lines

External inquiries

33. A project team conducts a review of its latest software design. The review process is well-defined and is used by all projects within the company. As part of the review process, defect levels are compared against acceptable limits to determine appropriate corrective action.

According to the CMMI-DEV Vl_2_. which of the following activities could the company perform to demonstrate characteristics unique to a Maturin' Level 5 organization?

Submit defect data to a team for future defect prevention.

Collect defect data for each project's specific software process.

Record defect data and establish the process capability baseline

Assess the validity of each defect data measurement independently.

34. Results from a process audit show that the requirements group does not control changes to its software specifications.

Which of the following basic requirements should be added to the software configuration management (SCM) policy?

SCM must be implemented throughout the project's lifecycle.

SCM must be implemented for externally deliverable software products

Responsibility- for SCM must be explicitly assigned for each project

Each project must have an established repository for storing configuration items.

35. One of the biggest challenges in software testing is knowing

which functions to test

which tests to use

when to start testing

when to stop testing

36. When brainstorming is used to generate ideas, the most immediate result will be

an unrestricted list of items

a prioritized list of items

a categorized list of items

a problem solution

37. Defect prevention should be initiated during the

test phase

requirements phase

design phase

coding phase

38. Upon receipt of a new software deliver}-, which of the following tests should be executed to ensure the software operates in the target environment?

Release

Integration

Installation

Acceptance

39. Which of the following is an example of a poorly defined project milestone?

Program specification completed

Test plan approved by customer

Coding 50% completed

Program documentation approved

40. The most compelling reason for automating test execution is the need to

run a standard test set often

reduce test staff

verify initial product releases

stay current with program changes

Page 5 of 6

41. The Equity Theory states that for rewards to be motivational they must be distributed

as deserved

based on profit

at key milestones

based on seniority

42. Which of the following levels of control should be assigned when a software failure may result directly in a mishaps

LOC I - Autonomous Time Critical

LOC Ila - Autonomous Not Tune Critical

LOC nib - Operator Controlled

LOC IV - Not Safety Software

43. What type of technology- is designed to provide organizational partners with real-time access to information on a business-to-business architecture?

Embedded system

Encrypted email

Extranet

Internet

44. Which of the following disadvantages are associated with the "formal meeting" technique of oral communication?

Loss of non-verbal communication, no permanent record, and time consuming

Loss of non-verbal communication, one way communication, and all topics may not be relevant to all team members

Can degrade into time wasters, can be disruptive, and requires considerable planning and skills to achieve positive impression

Can degrade into time wasters, some people feel uncomfortable offering opinions in public, and difficult for remote team members

45. The benefits of having the data owner collect the data is that data owners

can process data as it is being created, which increases collection speed

know which are the best statistical tools and techniques for data analysis

have in-depth knowledge of the data: therefore, the data they collect will be bias-free

are more likely to detect anomalies in the data as it is being collected., which helps increase accuracy

46. Which of the following is a management practice that will provide business continuity?

Creating and documenting a business continuity’ plan

Defining an organizational policy for business continuity

Analyzing and assessing the organization for business continuity’

Identifying and selecting appropriate strategies for business continuity

47. A software quality engineer is managing a project to develop a new air traffic control system for a federal agency.

When conducting a stakeholder needs analysis., which of the following groups would be most important for eliciting criteria for the functional tests?

Current air traffic controllers

Investigators at the transportation safety board

Key associations that represent pilots and ground crews

Purchasing and finance representatives from the federal agency

48. In order for a risk management plan to be effective., it should be

updated regularly to address new risks

monitored continuously to determine risk frequency

based on maturing goals and sub-goals

reviewed for contributions to the risk database

49. One advantage of outsourcing is that it allows the primary company to

focus resources on its core competencies

redirect its resources on new product development

reduce the cost of ongoing training

eliminate the need for a skills-based workforce

50. When a software change order is reviewed by the change control board (CCB), it is assigned a status from which of the following sets of classifications?

Accepted, evaluated, m progress

Approved, disapproved, deferred

Escalated, rejected, in progress

Escalated, proposed, accepted

Page 6 of 6

51. Which of the roles in an organizational change management core team see the need for change and will help sell it to the organization?

Change sponsors

Change advocates

Official change agents

Informal change agents

52. In a Scrum project, who is responsible for determining the time estimates during the project?

Scrum master

Sponsor

Project team

Champion

53. Which of the following functions is the first step for effective software configuration management?

Configuration control

Configuration status accounting

Configuration audits and reviews

Configuration item identification

TAGS:

CSQE, CSQE exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

Study Online CSSBB Exam Dumps to Pass

CSSBB dumps questions can help you identify areas where you need to focus your studies. As you answer questions, you...

Get CSQE Dumps Full Version

Q&As: 175
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm