Juniper JN0-636 Exam Questions Simulate Actual JN0-636 Exam

Category:

Comments:

0 Comments

Post Date:

June 2, 2023

JN0-636 exam dumps questions are designed to simulate the actual exam. This means that you will get a feel for the types of questions you can expect to see on the exam, as well as the format and difficulty level. In addition, JNCIP-SEC JN0-636 dumps are often accompanied by detailed explanations and answers. This means that if you get a question wrong, you can learn from your mistake and understand why the correct answer is the right one. Test free online JN0-636 exam dumps below.

Page 1 of 4

1. You are asked to detect domain generation algorithms

Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)

Define an advanced-anti-malware policy under [edit services].

Attach the security-metadata-streaming policy to a security

Define a security-metadata-streaming policy under [edit

Attach the advanced-anti-malware policy to a security policy.

2. 1.SRX Series device enrollment with Policy Enforcer fails To debug further, the user issues the following commandshow configuration services security―intelligence url

https://cloudfeeds.argon.juniperaecurity.net/api/manifeat.xml

and receives the following output:

What is the problem in this scenario?

The device is directly enrolled with Juniper ATP Cloud.

The device is already enrolled with Policy Enforcer.

The SRX Series device does not have a valid license.

Junos Space does not have matching schema based on the

3. Exhibit

Which two statements are correct about the output shown in the exhibit? (Choose two.)

The packet is processed as host inbound traffic.

The packet matches the default security policy.

The packet matches a configured security policy.

The packet is processed in the first path packet flow.

4. In an effort to reduce client-server latency transparent mode was enabled an SRX series device.

Which two types of traffic will be permitted in this scenario? (Choose Two)

ARP

Layer 2 non-IP multicast

BGP

IPsec

5. Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user’s access rights.

What would you use to assist your SRX series devices to accomplish this task?

JIMS

Junos Space

JSA

JATP Appliance

6. You are asked to look at a configuration that is designed to take all traffic with a specific source ip address and forward the traffic to a traffic analysis server for further evaluation. The configuration is no longer working as intended.

Referring to the exhibit which change must be made to correct the configuration?

Apply the filter as in input filter on interface xe-0/2/1.0

Apply the filter as in input filter on interface xe-0/0/1.0

Create a routing instance named default

Apply the filter as in output filter on interface xe-0/1/0.0

7. A company wants to paron their physical SRX series firewall into multiple logical units and assign each unit (tenant) to a department within the organization. You are the primary administrator of firewall

and a colleague is the administrator for one of the departments.

Which two statements are correct about your colleague? (Choose two)

The colleague can configure the resources allocated and routing protocols

The colleague can access and view the resources of the tenant system.

The colleague can create and assign logical interfaces to the tenant system

The colleague can modify the number of allocated resources for the tenant system

8. Click the Exhibit button.

When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.

What is the cause of the error?

The fxp0 IP address is not routable

The SRX Series device certificate does not match the JATP certificate

The SRX Series device does not have an IP address assigned to the interface that accesses JATP

A firewall is blocking HTTPS on fxp0

9. Exhibit

Referring to the exhibit, which statement is true?

This custom block list feed will be used before the Juniper Seclntel

This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.

This custom block list feed will be used instead of the Juniper Seclntel block list feed

This custom block list feed will be used after the Juniper Seclntel block list feed.

10. Which statement is true about persistent NAT types?

The target-host-port parameter cannot be used with IPv4 addresses in NAT46.

The target-host parameter cannot be used with IPv6 addressee in NAT64.

The target-host parameter cannot be used with IPv4 addresses inNAT46

The target-host-port parameter cannot be used with IPv6 addresses in NAT64

Page 2 of 4

11. According to the log shown in the exhibit, you notice the IPsec session is not establishing.

What is the reason for this behavior?

Mismatched proxy ID

Mismatched peer ID

Mismatched preshared key

Incorrect peer address.

12. You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.

Which two statements are true in this scenario? (Choose two.)

The DNS doctoring ALG is not enabled by default.

The Proxy ARP feature must be configured.

The DNS doctoring ALG is enabled by default.

The DNS CNAME record is translated.

13. Exhibit

An administrator wants to configure an SRX Series device to log binary security events for tenant systems.

Referring to the exhibit, which statement would complete the configuration?

Configure the tenant as TSYS1 for the pi security profile.

Configure the tenant as root for the pi security profile.

Configure the tenant as master for the pi security profile.

Configure the tenant as local for the pi security profile

14. Exhibit

The highlighted incident (arrow) shown in the exhibit shows a progression level of "Download" in the kill chain.

What are two appropriate mitigation actions for the selected incident? (Choose two.)

Immediate response required: Block malware IP addresses (download server or CnC server)

Immediate response required: Wipe infected endpoint hosts.

Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.

Not an urgent action: Use IVP to confirm if machine is infected.

15. Exhibit.

A hub member of an ADVPN is not functioning correctly.

Referring the exhibit, which action should you take to solve the problem?

[edit interfaces] root@vSRX-1# delete st0.0 multipoint

[edit interfaces] user@hub-1# delete ipsec vpn advpn-vpn traffic-selector

[edit security] user@hub-1# set ike gateway advpn-gateway advpn suggester disable

[edit security] user@hub-1# delete ike gateway advpn-gateway advpn partner

16. You want to enable inter-tenant communicaon with tenant system.

In this Scenario, which two solutions will accomplish this task?

interconnect EVPN switch

interconnect VPLS switch

external router

logical tunnel interface

17. You are required to deploy a security policy on an SRX Series device that blocks all known Tor network IP addresses.

Which two steps will fulfill this requirement? (Choose two.)

Enroll the devices with Juniper ATP Appliance.

Enroll the devices with Juniper ATP Cloud.

Enable a third-party Tor feed.

Create a custom feed containing all current known MAC addresses.

18. You want traffic to avoid the flow daemon for administrative task.

In this scenario which two stateless service are available with selective stateless packet based

service. (Choose Two)

Layer 2 switching

IPv4 routing

IPsec

IPv6 routing

19. Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.

Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.)

A)

Option A

Option B

Option C

Option D

20. You are asked to control access to network resources based on the identity of an authenticated device.

Which three steps will accomplish this goal on the SRX Series firewalls? (Choose three)

Configure an end-user-profile that characterizes a device or set of devices

Reference the end-user-profile in the security zone

Reference the end-user-profile in the security policy.

Apply the end-user-profile at the interface connecting the devices

Configure the authentication source to be used to authenticate the device

Page 3 of 4

21. Which two modes are supported on Juniper ATP Cloud? (Choose two.)

global mode

transparent mode

private mode

Layer 3 mode

22. Which two log format types are supported by the JATP appliance? (Choose two.)

YAML

XML

CSV

YANG

23. Exhibit

Which two statements are correct about the output shown in the exhibit. (Choose two.)

The source address is translated.

The packet is an SSH packet

The packet matches a user-configured policy

The destination address is translated.

24. you must create a secure fabric in your company’s network

In this Scenario, which three statements are correct? (Choose Three)

MX Series device associated with tenants can belong to only one site

A switch must be assigned to the site to enforce an infected host policy within the network

SRX Series devices can belong to multiple sites

SRX Series devices can belong to only one site

Switches and connectors cannot be added to the same site

25. Which two statements are correct regarding tenant systems on SRX Series devices? (Choose two.)

A maximum of 32 tenant systems can be configured on a physical SRX device.

All tenant systems share a single routing protocol process.

Each tenant system runs its own instance of the routing protocol process

A maximum of 500 tenant systems can be configured on a physical SRX device.

26. You are asked to share threat intelligence from your environment with third party tools so that those tools can be identify and block lateral threat propagation from compromised hosts.

Which two steps accomplish this goal? (Choose Two)

Configure application tokens in the SRX Series firewalls to limit who has access

Enable Juniper ATP Cloud to share threat intelligence

Configure application tokens in the Juniper ATP Cloud to limit who has access

Enable SRX Series firewalls to share Threat intelligence with third party tool.

27. Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

The configured solution allows IPv6 to IPv4 translation.

The configured solution allows IPv4 to IPv6 translation.

The IPv6 address is invalid.

External hosts cannot initiate contact.

28. The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.

In this scenario, which two statements related to the feature are true? (Choose two.)

This feature does not capture transit traffic.

This feature captures ICMP traffic to and from the SRX Series device.

This feature is supported on high-end SRX Series devices only.

This feature is supported on both branch and high-end SRX Series devices.

29. Exhibit

Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"? (Choose two.)

CAK is not used for encryption and decryption of the MACsec session.

SAK is successfully generated using this key.

CAK is used for encryption and decryption of the MACsec session.

SAK is not generated using this key.

30. You are asked to download and install the IPS signature database to a device operating in chassis cluster mode.

Which statement is correct in this scenario?

You must download and install the IPS signature package on the primary node.

The first synchronization of the backup node and the primary node must be performed manually.

The first time you synchronize the IPS signature package from the primary node to the backup node, the primary node must be rebooted.

The IPS signature package must be downloaded and installed on the primary and backup nodes.

Page 4 of 4

31. You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.

Which configuration accomplishes these objectives?

A)

Option A

Option B

Option C

Option D

32. Exhibit

The show network-access aaa radius-servers command has been issued to solve authentication issues.

Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (Choose TWO)

200l:DB8:0:f101;:2

192.168.30.191

192.168.30.190

192.168.30.188

33. You are requested to enroll an SRX Series device with Juniper ATP Cloud.

Which statement is correct in this scenario?

If a device is already enrolled in a realm and you enroll it in a new realm, the device data or configuration information is propagated to the new realm.

The only way to enroll an SRX Series device is to interact with the Juniper ATP Cloud Web portal.

When the license expires, the SRX Series device is disenrolled from Juniper ATP Cloud without a grace period

Juniper ATP Cloud uses a Junos OS op script to help you configure your SRX Series device to connect to the Juniper ATP Cloud service.

34. You want to enroll an SRX Series device with Juniper ATP Appliance. There is a firewall device in the path between the devices.

In this scenario, which port should be opened in the firewall device?

8080

443

35. Exhibit:

You are troubleshooting a firewall filter shown in the exhibit that is intended to log all traffic and block

only inbound telnet traffic on interface ge-0/0/3.

How should you modify the configuration to fulfill the requirements?

Modify the log-all term to add the next term action

Delete the log-all term

Add a term before the log-all term that blocks Telnet

Apply a firewall filter to the loopback interface that blocks Telnet traffic

TAGS:

JN0-636, JN0-636 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

Juniper Free Dumps

Get JN0-636 Dumps Full Version

Q&As: 115
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Juniper JN0-636 Exam Questions Simulate Actual JN0-636 Exam

Related

Posts

Valid JN0-252 Exam Dumps are Your best Choice to Pass

JN0-280 Dumps Questions – Effective Way to Get Certified

Online JN0-105 Dumps Help You Understand Questions Well

JN0-480 Exam Dumps – Reliable Way to Pass and Get Certified

About Us

EMAIL

Services

Opening Hours