Online D-RP-OE-A-24 Dumps Help You Understand Questions Well

Category:

Comments:

0 Comments

Post Date:

April 3, 2024

If you're interested in pursuing the Dell Data Protection certification, it's important to understand the exam format and the types of questions you can expect. This is where D-RP-OE-A-24 questions come in. D-RP-OE-A-24 exam dumps questions are designed to simulate the actual certification exam, providing you with a deeper understanding of the exam format and what to expect on test day. By taking practice exams and reviewing D-RP-OE-A-24 questions, you can identify areas where you may need to focus your studying. Study free D-RP-OE-A-24 exam dumps below.

Page 1 of 5

1. Which type of RecoverPoint Consistency Group contains both active and standby production copies?

XtremIO Consistency Groups

Distributed Consistency Groups

Any group with multiple remote copies

MetroPoint Consistency Group

2. Which RecoverPoint CLI command can be used to show a summarization of the errors and warnings for either one site or the entire RecoverPoint system?

get_rpa_states

get_events_log

get_system_status

get_clusters_topology

3. Select all valid steps to recover from a logical corruption in a RecoverPoint protected environment using the Recover Production wizard.

Unmount the affected volumes.

Pause the affected C

Execute the "Recover Production" wizard.

Create a recovery bookmark.

4. Which EMC product integrates with RecoverPoint to provide application-driven point-in-time copies?

ProtectPoint

ViPR SRM

Data Domain

AppSync

5. A company is using XtremIO for their RecoverPoint environment. They have approximately 100 GB of cumulative changes per day with the change being constant throughout the day. The company has a requirement to roll back 48 hours.

How should the Journals be sized and how should the copy policy be configured to ensure maximum protection with the least amount of storage used?

5 GB with the “Required Protection Window” set for 2 days

10 GB with the “Required Protection Window” set for 2 days

40 GB with the “Required Protection Window” set for 2 days

200 GB with the “Required Protection Window” set for Default

6. What does a physical RecoverPoint cluster connect to when configured with a single VMAX array?

An additional VMAX for redundancy

A single journal volume

The SAN through Fibre Channel

The SAN through iSCSI

7. Which CLI command is used to view the error and warning log of a RecoverPoint system?

`get_errors`

`get_system_log`

`get_events_log`

`show_alerts`

8. Which Consistency Group setting is directly affected by the maximum Journal lag setting?

Deduplication

RPO

Compression

RTO

9. When using a Distributed Consistency Group, additional traffic is generated between the primary RPA and secondary RPAs.

Where is this increase in traffic observed?

Additional traffic is seen on the WAN network between the RPAs

Additional traffic is seen on the FC links between the RPAs

No additional traffic will be observed because host writes are multicast to all appliances in a cluster

Additional traffic is seen on the management network between the RPAs

10. Which RPA interface is used for management?

eth1

eth0

iSCSI-1

iSCSI-2

Page 2 of 5

11. What is a possible option to store the “Collect System Information” file using RecoverPoint Unispehre?

FTP server configured on the RPA cluster

External temporary FTP server

Local RPA

Syslog server

12. Select all conditions that trigger a 'high-load alert' in RecoverPoint.

Initialization of new CGs

Excessive WAN traffic

Undersized journal volumes

Poorly performing storage hardware

13. What benefits does the use of RecoverPoint bring to a hybrid cloud environment?

Lower overall storage costs

Improved RPO and RTO for cloud applications

Seamless data mobility between on-premises and cloud

Reduction in physical server count

14. An administrator wants to integrate Site Recovery Manager (SRM) with RecoverPoint.

Where should the RecoverPoint storage replication adapter be installed?

On the same servers running VCenter and the SRM service

On servers running SRM service only

On servers running VCenter only

On a newly installed server

15. Which feature ensures data consistency across multiple sites in a RecoverPoint deployment?

Distributed Consistency Groups

Multi-site synchronous replication

Inter-site deduplication technology

Automated network rerouting

16. After creating a Consistency Group with a local copy, initialization is taking longer than expected.

What is a possible reason for this condition?

Limited WAN bandwidth is available to the RPAs

Slow performing storage on the production array

Copy is not attached to the same splitter as production

Size mismatch between the production and the copy volumes

17. A RecoverPoint administrator is failing over a Consistency Group including two non-production copies.

What will be the replication state between the new production and former production when the administrator selects “Set Copy as Production”?

A full sweep is started between the new production and former production

A volume sweep is started between the new production and former production

A short initialization is started between the new production and former production

Replication is paused between the new production and former production

18. Select all conditions that trigger a 'high-load alert' in RecoverPoint.

Initialization of new CGs

Excessive WAN traffic

Undersized journal volumes

Poorly performing storage hardware

19. If a VPLEX distributed device is selected during the RecoverPoint Consistency Group Creation wizard, which option will appear?

Ability to create a MetroPoint Consistency Group

List of LUNs which are less than 10 TBs in size; the size limit for distributed devices

Section to define production and replica Journals on unregistered storage arrays

Radio button to select which cluster will be the winning cluster upon the initialization of the Consistency Group

20. A database team is performing tests against a PIT copy data. Their write activity is going to exceed the currently allocated amount of space dedicated to Image Access mode.

What should be done to allow testing to continue without disruption to their testing?

Navigate to Protection> Manage Protection> Select the CG from the list and select the copy. Click Edit Journal, and add one or more additional Journal volumes.

Expand the Journal volume using native array tools. Navigate to Protection>Manage Protection>Select the CG from the list and select the copy. Click Edit Journal, and then select “Expand Journal”.

Navigate to Protection> Manage Protection>Select the CG from the list and select the copy. Click Edit, and then increase the reserved image access percentage from 20%.

Use the config_copy_group= copy= policy image_access_log_size= CLI command

Page 3 of 5

21. Which point-in-time image can be tied to application events and is created by a user command?

Direct Access

Virtual Image Access

Bookmark

Snapshot

22. What are the advantages of using the splitter in EMC RecoverPoint?

It enables more efficient use of network resources.

It allows for precise control of replication granularity.

It enhances security by segregating data streams.

It simplifies management by automating replication tasks.

23. What is a critical consideration when deploying a new Consistency Group in a busy RecoverPoint environment?

Ensuring sufficient WAN bandwidth

Making sure the new CG uses separate hardware

Journal volume sizing

Prioritizing the CG over others

24. What is the direct benefit of integrating RecoverPoint with VMware?

It allows for single-sign-on capabilities.

It provides VM-level replication granularity.

It reduces overall storage needs.

It simplifies user management.

25. A RecoverPoint administrator needs to add a local copy to three existing Consistency Groups. The RecoverPoint system currently contains 100 Consistency Groups. Each group has one remote copy with 80 replication sets. Each cluster contains eight physical RPAs.

However, the administrator is unable to add all the local copies.

What is a cause for this issue?

Consistency Group copy cannot have 1024 volumes within the copy

Cluster has the maximum number of RPAs and cannot be expanded

Addition of the local volumes will exceed the 16K volume limit per cluster

RecoverPoint system needs to be converted to a RP/EX system to support the extra volumes

26. A RecoverPoint administrator wants to use the compression setting to save bandwidth in their environment.

What will be the impact of changing the link compression setting on a Consistency Group?

Short initialization

Temporary high-load

Journal history will be lost

Long resynchronization

27. Select all valid options for a RecoverPoint administrator when adding a local copy to an existing CG.

Reconfigure the existing CG to include the local copy.

Create a new CG with identical settings.

Use the "Protect Volumes" wizard.

Upgrade the system license.

28. How does EMC RecoverPoint address the challenge of maintaining data accuracy during replication?

By ensuring all data writes are timestamped

By employing write-order fidelity technology

Using artificial intelligence to predict data changes

Through real-time data compression

29. Select all valid steps to recover from a logical corruption in a RecoverPoint protected environment using the Recover Production wizard.

Unmount the affected volumes.

Pause the affected C

Execute the "Recover Production" wizard.

Create a recovery bookmark.

30. During Consistency Group initialization, other groups are experiencing high load conditions.

Which utility can be used to reduce the negative impact on performance?

I/O throttling

Detect bottlenecks

FC diagnostics

IP diagnostics

Page 4 of 5

31. 1.What is determined by setting the priority level on a Consistency Group (CG)?

Amount of time before sending an automated notification stating a watermark has been reached

Amount of bandwidth allocated to the CG in relation to all other CGs using the same primary RPA

CG(s) that requires the most resources from the primary RPA, regardless of other system activity

Order in which the CG will begin replication in the event a failover occurs

32. A storage administrator is unable to perform Direct Access to a copy in their RecoverPoint environment.

Which array type has this limitation with regards to RecoverPoint copies?

XtremIO

VMAX

VNX

VPLEX

33. What are the benefits of using the journal in EMC RecoverPoint for data recovery?

Allows recovery to any point within the journal window

Reduces the overall storage footprint by compressing journal data

Enhances data transfer speeds between production and recovery sites

Provides a detailed audit trail of all changes over time

34. Which characteristics define the deployment of RecoverPoint in large enterprises?

Scalability to match enterprise growth

Support for mixed storage environments

Requirement for specialized IT skills

High initial setup costs

35. Which attributes can affect the Distribution phase of Consistency Groups?

Copy location, WAN bandwidth, and replication type

Change rate of the applications and number of replication sets

Journal volume performance, storage array performance, and copy volume performance

Compression and deduplication settings of the Consistency Group

36. In terms of data protection, what unique feature does RecoverPoint offer that traditional backup solutions typically do not?

High-frequency snapshots

Continuous data protection

Incremental forever backups

Granular file level restores

37. What function does RecoverPoint’s bandwidth reduction feature during replication?

It decreases the amount of data sent over the network.

It increases the speed of data transfer.

It encrypts data to ensure security.

It prioritizes traffic to ensure RPO compliance.

38. Which command can be used to reduce the impact of the initial volume synchronization on production applications?

config_io_throttling throttling=high

config_link_policy group= cgname copy_1=prod_copy copy_2= dr_copy regulate_application=yes

config_link_policy group= cgname copy_1=prod_copy copy_2= dr_copy regulate_application=no

config_io_throttling throttling=none

39. What is the minimum size of a Journal when using Distributed Consistency Groups?

10 GB

20 GB

40 GB

80 GB

40. Select all factors that influence the performance of a RecoverPoint system during a Consistency Group initialization.

Number of protected volumes

Size of the journal volumes

Amount of available WAN bandwidth

RPA CPU utilization

Page 5 of 5

41. What is the direct benefit of integrating RecoverPoint with VMware?

It allows for single-sign-on capabilities.

It provides VM-level replication granularity.

It reduces overall storage needs.

It simplifies user management.

TAGS:

D-RP-OE-A-24, D-RP-OE-A-24 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Inline Feedbacks

View all comments

Posts

DELL EMC Free Dumps

Get D-RP-OE-A-24 Dumps Full Version

Q&As: 66
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Online D-RP-OE-A-24 Dumps Help You Understand Questions Well

Related

Posts

D-VXB-DY-A-24 Dumps Guarantee You Pass D-VXB-DY-A-24 Exam Easily

Study Online D-CS-DS-23 Exam Dumps to Pass

D-MN-OE-23 Online Dumps Boost Your Career

Get Certified Easily with Online D-PSC-DY-23 Dumps

About Us

EMAIL

Services

Opening Hours