PAM-CDE-RECERT Dumps Guarantee You Pass PAM-CDE-RECERT Exam Easily

Category:

Comments:

0 Comments

Post Date:

April 27, 2023

As new threats and vulnerabilities emerge, the PAM-CDE-RECERT exam is updated to reflect the latest trends in CyberArk CDE Recertification. By using PAM-CDE-RECERT exam dumps questions, you can ensure that you're staying up-to-date with the latest exam content and are fully prepared to address new challenges in CyberArk CDE Recertification. CyberArk PAM-CDE-RECERT exam dumps questions can help you optimize your preparation and ensure that you're fully prepared for the exam. Practice free CyberArk PAM-CDE-RECERT exam dumps questions below.

Page 1 of 7

1. When managing SSH keys, the CPM stored the Private Key

In the Vault

On the target server

A & B

Nowhere because the private key can always be generated from the public key.

2. Which components can connect to a satellite Vault in distributed Vault architecture?

CPM, EPM, PTA

PVWA, PSM

CPM, PVWA, PSM

CPM, PSM

3. Your organization has a requirement to allow users to “check out passwords” and connect to targets with the same account through the PSM.

What needs to be configured in the Master policy to ensure this will happen?

Enforce check-in/check-out exclusive access = active; Require privileged session monitoring and isolation = active

Enforce check-in/check-out exclusive access = inactive; Require privileged session monitoring and isolation = inactive

Enforce check-in/check-out exclusive access = inactive; Record and save session activity = active

Enforce check-in/check-out exclusive access = active; Record and save session activity = inactive

4. You receive this error:

“Error in changepass to user domainuser on domain server(domain.(winRc=5) Access is denied.”

Which root cause should you investigate?

The account does not have sufficient permissions to change its own password.

The domain controller is unreachable.

The password has been changed recently and minimum password age is preventing the change.

The CPM service is disabled and will need to be restarted.

5. Secure Connect provides the following. Choose all that apply.

PSM connections to target devices that are not managed by CyberArk.

Session Recording

Real-time live session monitoring.

PSM connections from a terminal without the need to login to the PVWA

6. Which built-in report from the reports page in PVWA displays the number of days until a password is due to expire?

Privileged Accounts Inventory

Privileged Accounts Compliance Status

Activity Log

Privileged Accounts CPM Status

7. Which CyberArk group does a user need to be part of to view recordings or live monitor sessions?

Auditors

Vault Admin

DR Users

Operators

8. Accounts Discovery allows secure connections to domain controllers.

TRUE

FALSE

9. Which certificate type do you need to configure the vault for LDAP over SSL?

the CA Certificate that signed the certificate used by the External Directory

a CA signed Certificate for the Vault server

a CA signed Certificate for the PVWA server

a self-signed Certificate for the Vault

10. What is the easiest way to duplicate an existing platform?

From PrivateArk, copy/paste the appropriate Policy.ini file; then rename it.

From the PVWA, navigate to the platforms page, select an existing platform that is similar to the new target account platform and then click Duplicate; name the new platform.

From PrivateArk, copy/paste the appropriate settings in PVConfiguration.xml; then update the policyName variable.

From the PVWA, navigate to the platforms page, select an existing platform that is similar to the new target account platform, manually update the platform settings and click “Save as” INSTEAD of save to duplicate and rename the platform.

Page 2 of 7

11. What is the primary purpose of One Time Passwords?

Reduced risk of credential theft

More frequent password changes

Non-repudiation (individual accountability)

To force a 'collusion to commit' fraud ensuring no single actor may use a password without authorization.

12. You are logging into CyberArk as the Master user to recover an orphaned safe.

Which items are required to log in as Master?

Master CD, Master Password, console access to the Vault server, Private Ark Client

Operator CD, Master Password, console access to the PVWA server, PVWA access

Operator CD, Master Password, console access to the Vault server, Recover.exe

Master CD, Master Password, console access to the PVWA server, Recover.exe

13. In your organization the “click to connect” button is not active by default.

How can this feature be activated?

Policies > Master Policy > Allow EPV transparent connections > Inactive

Policies > Master Policy > Session Management > Require privileged session monitoring and isolation > Add Exception

Policies > Master Policy > Allow EPV transparent connections > Active

Policies > Master Policy > Password Management

14. Which parameter controls how often the CPM looks for Soon-to-be-expired Passwords that need to be changed.

HeadStartInterval

Interval

ImmediateInterval

The CPM does not change the password under this circumstance

15. Which combination of Safe member permissions will allow end users to log in to a remote machine transparently but NOT show or copy the password?

Use Accounts, Retrieve Accounts, List Accounts

Use Accounts, List Accounts

Use Accounts

List Accounts, Retrieve Accounts

16. PSM captures a record of each command that was executed in Unix.

TRIE

FALSE

17. Which utilities could you use to change debugging levels on the vault without having to restart the vault. Select all that apply.

PAR Agent

PrivateArk Server Central Administration

Edit DBParm.ini in a text editor.

Setup.exe

18. dbparm.ini is the main configuration file for the Vault.

True

False

19. How much disk space do you need on the server for a PAReplicate?

500 GB

1 TB

same as disk size on Satellite Vault

same as disk size on Primary Vault

20. The Privileged Access Management solution provides an out-of-the-box target platform to manage SSH keys, called UNIX Via SSH Keys.

How are these keys managed?

CyberArk stores Private keys in the Vault and updates Public keys on target systems.

CyberArk stores Public keys in the Vault and updates Private keys on target systems.

CyberArk does not store Public or Private keys and instead uses a reconcile account to create keys on demand.

CyberArk stores both Private and Public keys and can update target systems with either key.

Page 3 of 7

21. The System safe allows access to the Vault configuration files.

TRUE

FALS

22. For Digital Vault Cluster in a high availability configuration, how does the cluster determine if a node is down?

The heartbeat s no longer detected on the private network.

The shared storage array is offline.

An alert is generated in the Windows Event log.

The Digital Vault Cluster does not detect a node failure.

23. Which keys are required to be present in order to start the PrivateArk Server service?

Recovery public key

Recovery private key

Server key

Safe key

24. You are creating a new Rest API user that utilizes CyberArk Authentication.

What is a correct process to provision this user?

Private Ark Client > Tools > Administrative Tools > Users and Groups > New > User

Private Ark Client > Tools > Administrative Tools > Directory Mapping > Add

PVWA > User Provisioning > LDAP Integration > Add Mapping

PVWA > User Provisioning > Users and Groups > New > User

25. VAULT authorizations may be granted to_____.

Vault Users

Vault Groups

LDAP Users

LDAP Groups

26. What is mandatory for a PVWA installation?

A DNS entry for PVWA url must be created.

A company signed TLS certificate must be imported into the server

A vault Administrator user must be used to register the PVWA

Data Execution Prevention must be disabled.

27. Ad-Hoc Access (formerly Secure Connect) provides the following features. Choose all that apply.

PSM connections to target devices that are not managed by CyberArk.

Session Recording.

Real-time live session monitoring.

PSM connections from a terminal without the need to login to the PVW

28. To enable the Automatic response “Add to Pending” within PTA when unmanaged credentials are found, what are the minimum permissions required by PTAUser for the PasswordManager_pending safe?

List Accounts, View Safe members, Add accounts (includes update properties), Update Account content, Update Account properties

List Accounts, Add accounts (includes update properties), Delete Accounts, Manage Safe

Add accounts (includes update properties), Update Account content, Update Account properties, View Audit

View Accounts, Update Account content, Update Account properties, Access Safe without confirmation, Manage Safe, View Audit

29. A customer is deploying PVWAs in the Amazon Web Services Public Cloud.

Which load balancing option does CyberArk recommend?

Network Load Balancer

Classic Load Balancer

HTTPS load balancer

Public standard load balancer

30. When a group is granted the 'Authorize Account Requests' permission on a safe Dual Control requests must be approved by

Any one person from that group

Every person from that group

The number of persons specified by the Master Policy

That access cannot be granted to groups

Page 4 of 7

31. What is the purpose of the PrivateArk Server service?

Executes password changes

Maintains Vault metadata

Makes Vault data accessible to components

Sends email alerts from the Vault

32. Assuming a safe has been configured to be accessible during certain hours of the day, a Vault Admin may still access that safe outside of those hours.

TRUE

FALSE

33. For a safe with Object Level Access enabled you can turn off Object Level Access Control when it no longer needed on the safe.

TRUE

FALSE

34. Which of the following components can be used to create a tape backup of the Vault?

Disaster Recovery

Distributed Vaults

Replicate

High Availability

35. Vault admins must manually add the auditors group to newly created safes so auditors will have sufficient access to run reports.

TRUE

FALSE

36. You are installing HTML5 gateway on a Linux host using the RPM provided.

After installing the Tomcat webapp, what is the next step in the installation process?

Deploy the HTML5 service (guacd)

Secure the connection between the guacd and the webapp

Secure the webapp and JWT validation endpoint

Configure ASLR

37. You have been asked to identify the up or down status of Vault services.

Which CyberArk utility can you use to accomplish this task?

Vault Replicator

PAS Reporter

Remote Control Agent

Syslog

38. Within the Vault each password is encrypted by:

the server key

the recovery public key

the recovery private key

its own unique key

39. Your organization requires all passwords be rotated every 90 days.

Where can you set this regulatory requirement?

Master Policy

Safe Templates

PVWAConfig.xml

Platform Configuration

40. A user with administrative privileges to the vault can only grant other users privileges that he himself has.

TRUE

FALSE

Page 5 of 7

41. Users can be resulted to using certain CyberArk interfaces (e.g.PVWA or PACLI).

TRUE

FALS

42. When Dual Control is enabled a user must first submit a request in the Password Vault Web Access (PVWA) and receive approval before being able to launch a secure connection via PSM for Windows (previously known as RDP Proxy).

True

False, a user can submit the request after the connection has already been initiated via the PSM for Windows

43. DRAG DROP

Arrange the steps to restore a Vault using PARestore for a Backup in the correct sequence.

44. What is the chief benefit of PSM?

Privileged session isolation

Automatic password management

Privileged session recording

‘Privileged session isolation’ and ‘Privileged session recording’

45. A Simple Mail Transfer Protocol (SMTP) integration is critical for monitoring Vault activity and facilitating workflow processes, such as Dual Control.

True

False

46. You are onboarding 5,000 UNIX root accounts for rotation by the CPM. You discover that the CPM is unable to log in directly with the root account and will need to use a secondary account.

How should this be configured to allow for password management using least privilege?

Configure each CPM to use the correct logon account.

Configure each CPM to use the correct reconcile account.

Configure the UNIX platform to use the correct logon account.

Configure the UNIX platform to use the correct reconcile account.

47. DRAG DROP

Match each component to its respective Log File location.

48. DRAG DROP

Match the log file name with the CyberArk Component that generates the log.

49. A company requires challenge/response multi-factor authentication for PSMP sessions.

Which server must you integrate with the CyberArk vault?

LDAP

PKI

SAML

RADIUS

50. A logon account can be specified in the platform settings.

True

False

Page 6 of 7

51. To use PSM connections while in the PVWA, what are the minimum safe permissions a user or group will need?

List Accounts, Use Accounts

List Accounts, Use Accounts, Retrieve Accounts

Use Accounts

List Accounts, Use Accounts, Retrieve Accounts, Access Safe without confirmation

52. A new HTML5 Gateway has been deployed in your organization.

Where do you configure the PSM to use the HTML5 Gateway?

Administration > Options > Privileged Session Management > Configured PSM Servers > Connection Details > Add PSM Gateway

Administration > Options > Privileged Session Management > Add Configured PSM Gateway Servers

Administration > Options > Privileged Session Management > Configured PSM Servers > Add PSM Gateway

Administration > Options > Privileged Session Management > Configured PSM Servers > Connection Details

53. What is the primary purpose of Dual Control?

Reduced risk of credential theft

More frequent password changes

Non-repudiation (individual accountability)

To force a 'collusion to commit' fraud ensuring no single actor may use a password without authorization.

54. What is a prerequisite step before CyberArk can be configured to support RADIUS authentication?

Log on to the PrivateArk Client, display the user properties of the user to configure, run the Authentication method drop-down list, and select RADIUS authentication.

In the RADIUS server, define the CyberArk Vault as RADIUS client/agent.

In the Vault Installation folder, run CAVaultManger as Administrator with the SecureSecretFiles command.

Navigate to /Server/Conf and open DBParms.ini and set the RadiusServersInfo parameter.

55. When a DR Vault Server becomes an active vault, it will automatically fail back to the original state once the Primary Vault comes back online.

True; this is the default behavior

False; this is not possible

True, if the AllowFailback setting is set to “yes” in the padr.ini file

True, if the AllowFailback setting is set to “yes” in the dbparm.ini file

56. Users are unable to launch Web Type Connection components from the PSM server. Your manager asked you to open the case with CyberArk Support.

Which logs will help the CyberArk Support Team debug the issue? (Choose three.)

PSMConsole.log

PSMDebug.log

PSMTrace.log

.Component.log

PMconsole.log

ITAlog.log

57. You need to enable the PSM for all platforms.

Where do you perform this task?

Platform Management > (Platform) > UI & Workflows

Master Policy > Session Management

Master Policy > Privileged Access Workflows

Administration > Options > Connection Components

58. CyberArk implements license limits by controlling the number and types of users that can be provisioned in the vault.

TRUE

FALSE

59. What is the purpose of the Immediate Interval setting in a CPM policy?

To control how often the CPM looks for System Initiated CPM work.

To control how often the CPM looks for User Initiated CPM work.

To control how often the CPM rests between password changes.

To Control the maximum amount of time the CPM will wait for a password change to complete.

60. In accordance with best practice, SSH access is denied for root accounts on UNIX/LINUX system.

What is the BEST way to allow CPM to manage root accounts?

Create a privileged account on the target server. Allow this account the ability to SSH directly from the CPM machine. Configure this account as the Reconcile account of the target server’s root account.

Create a non-privileged account on the target server. Allow this account the ability to SSH directly from the CPM machine. Configure this account as the Logon account of the target server’s root account.

Configure the Unix system to allow SSH logins.

Configure the CPM to allow SSH logins.

Page 7 of 7

61. As long as you are a member of the Vault Admins group, you can grant any permission on any safe that you have access to.

TRUE

FALSE

62. If a password is changed manually on a server, bypassing the CPM, how would you configure the account so that the CPM could resume management automatically?

Configure the Provider to change the password to match the Vault’s Password

Associate a reconcile account and configure the platform to reconcile automatically

Associate a logon account and configure the platform to reconcile automatically

Run the correct auto detection process to rediscover the password

63. CyberArk user Neil is trying to connect to the Target Linux server 192.168.1.64 using a domain account ACME/linuxuser01 on Domain Acme.corp using PSM for SSH server 192.168.65.145.

What is the correct syntax?

Ssh neil@linuxuser01: [email protected]@192.168.1.45

Ssh neil@linuxuser01#[email protected]@192.168.1.45

Ssh neil@[email protected]@192.168.65.145

Ssh neil@[email protected]@[email protected]

TAGS:

PAM-CDE-RECERT, PAM-CDE-RECERT exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

CyberArk Free Dumps

Get PAM-CDE-RECERT Dumps Full Version

Q&As: 207
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

PAM-CDE-RECERT Dumps Guarantee You Pass PAM-CDE-RECERT Exam Easily

Related

Posts

Test Online CPC-SEN Dumps Questions to Be Certified

Improve Your Knowledge with ACCESS DEF Exam Dumps

Online SECRET-SEN Dumps Help You Understand Questions Well

PAM-DEF Online Dumps Boost Your Career

About Us

EMAIL

Services

Opening Hours