Pass D-DP-DS-23 Exam to Get DELL EMC Certification

1. A customer is using Dell EMC RecoverPoint for VMs with a four vNIC configuration.

Which vRPA network component communicates with VMkernel ports in IP Communication mode?

2. A customer wants to reduce their dependency on tapes but rather leverage their public cloud account for long-term retention. A majority of the applications are still traditionally run on individual physical servers. In addition, they are undergoing a major infrastructure refresh and virtualizing their environment.

However, they want to continue using tapes on only a case-by-case basis.

Which solution should be recommended?

3. A backup administrator needs to back up a file server at a remote location by using Dell EMC Avamar Virtual Edition (AVE). The file server has approximately 2 TB of data and a change rate of 7 GB per day.

Which configuration is required to perform the backup of this remote site?

4. A customer has multiple data centers running Dell EMC Avamar and PowerProtect DD as their data protection solution. They are interested in using the Dell EMC Cloud DR feature.

The customer is using a public cloud for hosting their corporate website. As part of the initial deployment, they are planning to perform VM image-level protection.

What are the minimum components required for this solution?

5. An existing Dell EMC NetWorker customer is interested in replacing their current tape-based infrastructure with Data Domain. At the same time, they want to reduce the network traffic for backups.

What is a consideration when integrating NetWorker with Data Domain?

6. Which tool can be used to size a server to fulfill analytics software requirements within a Cyber Recovery Vault?

7. A customer is wants to ingest their backup to a Dell EMC Data Domain using Aavamar at the maximum network throughout that the system supports.

What should be used to achieve this requirement?

8. Which type of authentication is supported in Dell EMC Avamar client server communication?

9. A customer has finished upgrading an unserved Dell EMC NetWorker server and requires a new license to activate the software.

Which information is required?

10. A system administrator has configured data protection and archive media servers to send data to a Dell EMC PowerProtect DD series appliance over Ethernet.

Which protocol is used to perform the task?

11. A customer is using Dell EMC PowerProtect DP4400 to back up their virtual environment.

What should be recommended if the customer must back up their NAS file servers using the same DP4400?

12. A company plans to use Dell EMC NetWorker to back up their VMware environment using vProxy technology.

Based on best practice, what is the recommended Transport mode?

13. A customer has a Dell EMC Data Domain system with a n action tier of 864 TB configured for Cloud Tier with two cloud units.

What is the maximum storage capacity of each cloud unit?

14. A company requires both a local copy and a remote copy for each of their protected applications.

What is the minimum number of connected Dell EMC RecoverPoint clusters that will meet this requirement?

15. A customer wants a technology refresh of their Dell EMC Networker environment. They want the ability to backup to disk devices. In addition, they want to write all backup-todisk devices with eight save sets simultaneously. After reviewing the current environment, you discover that only two drives are used.

Which setting should be change so that all are used simultaneously?

16. A customer wants to use 40 GbE breakout uplinks in a Dell EMC Integrated Data Protection Appliance (IDPA) factory-configured ToR switch.

Which customer environment needs to exist to make use of this uplink option?

17. A customer has 6.8 TB of data with multiple backup jobs. The largest backup job is 680 GB, and the existing backup window is over 10 hours which is exceeding the customer backup SLA. The customer has asked you to redesign their current solution with one that enables the backups to complete within an 8-hour window.

When designing the solution, which rate is used to determine the minimum required Dell EMC PowerProtect DD throughput?

18. You are designing a Dell EMC Data Domain solution for a customer who has a total of 3 TB of data with a 10% daily change rate. In addition, the customer has 60% file system and 40% database data that runs daily incremental, weekly, and monthly full backups with three months of retention.

When determining the capacity, sizing, and Data Domain model, which key factors should be considered?

19. Which Dell EMC solution protects and isolates critical data?

20. What is an advantage of a shared switch topology in a PowerProtect Cyber Recovery Solution?

21. A customer wants to monitor resources for the Dell EMC NetWorker server installed on the Microsoft Windows OS over a prolonged period of time.

Which tool must be used to meet this requirement?

22. A customer has a Dell EMC RecoverPoint Consistency Group that contains six Production volumes. Remote replication is needed to their disaster recovery site.

Which factor determines the Protection window for this group?

23. A customer wants to deploy a Dell EMC data protection solution that meets the following criteria:

- Provide their DBAs with the ability to control their own backups.

- A fixed data center footprint initially and with future upgrades.

- Ability to perform long-term retention to the cloud.

- Easy to deploy and have the Data Protection Central interface for management.

- Capability to perform reporting, indexing, and searching of backups.

Which Dell EMC solution meets the requirements?

24. A company using a Dell EMC RecoverPoint solution has asked you to explain how to increase their protection Windows on certain key Consistency Groups.

Which action addresses the company’s inquiry?

25. A customer has a new NAS device that to be backed Up. The data should be written to a EMC Data Domain with networker. The Data Domain is only accessible through the network.

What is the recommended way to back up the NAS through NDMP?

26. You are designing a Dell EMC RecoverPoint for VMs solution. During the design meeting, you are asked where point-in-time copies are stored to allow failover to a previous state.

What information should be provided to the customer?

27. As a total data protection solution, which Dell EMC Integrated Data Protection Appliance models use a Virtual Edition backup server?

28. In the Dell EMC Data Protection Suite for application, what is a benefits of storage Backup?

29. A customer is evaluating the risks associated with their environment after implementing a Dell EMC Isolated Recovery Solution.

What is the probability of an air gap bypass?

30. Refer to the Exhibit.





A company wants to implement replication using Dell EMC Data Domain systems in multiple locations. They want to replicate data at their London site to and from the Madrid site. In addition, the company wants to replicate data at the London site to and from the Paris site.

How should the company’s design requirements be addressed?

31. What is the approximate duplication rate for a Dell EMC Avamar server across all clients?

32. A system architect is designing a Dell EMC RecoverPoint for a VMs solution. During the design meeting, they are asked where point-in-time copies are stored to allow failover to a previous state.

What information should be provided to the customer?

33. Based on the graphic, which component in the Dell EMC Data Domain Cloud DR solution connects the On-Premises backup solution to the public cloud?

34. What is a key benefit associated with a Dell EMC DPS Hypervisor Direct solution?

35. What makes a DP4400 different from other Dell EMC PowerProtect DP series appliance models?

36. A company wants to leverage their cloud object storage account and move their long-term retention backup from their Dell EMC IDPA DP5300.

What is a recommended solution?

37. A company environment consists of two data centers with a single Dell EMC XtremIO array. The Company has indicate has that they need ability to provide disaster recovery protection.

Which RecoverPoint license will provide this capability while minimizing cost?

38. Which Dell EMC Isolated Recovery Solution component includes compute and a hardened Data Domain?

39. Which Microsoft technologies are used to provide database consistent backups for MS SQL with Dell DPS Application Direct?

40. What is Dell EMC PowerProtect Cloud Snapshot Manager?

41. The entire application infrastructure of a customer is hosted on two public clouds with no on-premises infrastructure except for user workstations.

They want to deploy a Dell EMC data protection solution that allows them to backup and bi-directionally replicate in each of their public cloud accounts. The customer is new to the Dell EMC data protection technology. They want to keep everything as simple as possible while minimizing the application footprint.

Which recommended solutions meet the requirements?

42. A customer is considering a Dell EMC Avamar backup solution. They want to know whether Avamar can provide the security benefit of data encryption for the data stored on Avamar.

What is an encryption at rest consideration?

43. In a Dell EMC Networker environment, which component uses the largest amount of storage resources?

44. How can the maximum capacity of 96 TB in the Dell EMC IDPA DP4400 fully utilized?

45. In a Dell EMC RecoverPoint for VMs environment, what is the minimum vRPA configuration that supports compression and deduplication?

46. A customer is planning to install Dell EMC NetWorker to back up to PowerProtect DD.

What are the optimal settings to minimize the backup window time?

47. What is a consideration when designing a network topology for PowerProtect Data Manager?

48. A customer has two new Dell EMC integrated Data Protection Appliances and wants to back up to both applications bidirectional. The data centers are connected by a WAN link that will also be used by other mission critical applications.

To prepare for replication, the customer wants to co-locate both appliances at one data center and configure replication locally minimize the initial replication traffic.

After the initial synchronization, one unit will be relocated and the network reconfigured at the disaster recovery data center, What is mandatory for this solution to be deployed?

49. Which PowerProtect Data Manager tool is used to back up ESXi virtual machines?

50. A company wants to perform backups of user desktops and laptops. In addition, they want the flexibility to have some users select the data to backup but restrict other users.

Which Dell EMC solution meets these requirements?