Prepare CWT-101 Exam with Using CWT-101 Dump Questions

If you are serious about passing your CWNP CWT-101 certification exam, practicing with CWT-101 dumps questions is an essential step in your preparation process. These CWT-101 dumps will help you assess your knowledge, identify your strengths and weaknesses, and improve your chances of passing the exam on the first try. So why wait? Start practicing today and give yourself the best possible chance of success! Test free CWT-101 exam dumps questions below.

Page 1 of 5

1. Which of the following is a measurement unit commonly used to assess RF signal strength?

Wireless scanner tools

Client signal strength reports

RSSI vs. dBm

Output power vs. received signal strength

 Loading...

2. Which management interface allows configuration of an 802.11 AP through a web browser?

Web-based

CLI (Command Line Interface)

Remote CLI

SNMP (Simple Network Management Protocol)

 Loading...

3. What RF feature determines the range and coverage of a wireless device?

Supported channels

Channel widths

Transmit power

Receive sensitivity

 Loading...

4. What security feature should be avoided in wireless networks, as it can be easily bypassed?

Shared Key Authentication

WPA3

802.1X/EAP

Pre-Shared Key

 Loading...

5. What is the term used to describe the software component responsible for authenticating and connecting to a wireless network?

Configuration errors

Interference

Supplicant

Feature incompatibility

 Loading...

6. What is the term used to describe the decrease in signal strength as an RF signal propagates through space?

Gain and loss

Reflection

Refraction

Free space path loss

 Loading...

7. What kind of antenna chart shows the radiation pattern of an antenna from the side view of that antenna?

Top-down

Azimuth

Horizontal

Elevation

 Loading...

8. Which security problem can occur if the network key used for encryption in a wireless network is incorrect?

Configuration errors

Incorrect passphrases

Incompatible EAP methods

Incorrect network keys

 Loading...

9. You have configured a WLAN profile on a client computer for a hidden SSID network. The SSID operates in both 2.4 GHz and 5 GHz. The profile never connects or even attempts to connect.

What is the most likely configuration error in the profile or on the computer?

Wrong passphrase

Band selection is configured for 5 GHz-only

Wrong SSID

Band selection is configured for 2.4 GHz-only

 Loading...

10. You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas.

What is most likely problem in that area?

High SNR

Improper AP security configuration

Poor signal strength

Improper client security configuration

 Loading...

Page 2 of 5

11. What term is used to describe the phenomenon of an RF signal bouncing off a surface?

Gain and loss

Reflection

Refraction

Scattering

 Loading...

12. You use 802.1X/EAP for all WLAN authentication in your network. You have several VoIP handsets that work well until they have to roam from one AP to another.

When they roam, calls are often dropped or call quality is significantly diminished.

What is the most likely cause of this problem?

Wrong passphrase entered on the VoIP handsets

Non-implemented roaming features on the APs

Wrong SSID used by the VoIP handsets

Wrong certificate installed on the VoIP handsets

 Loading...

13. What is one possible cause of mobility problems in a wireless network if the fast roaming method used by the client is not supported by the access point?

Configuration errors

Improper network settings

Unsupported fast roaming methods

Non-implemented roaming features

 Loading...

14. How many non-overlapping 20 MHz channels are available in the 5 GHz frequency band assuming the regulatory domain allows them all?

11

25

24

14

 Loading...

15. What is the term used to describe the key used for authenticating a wireless client to a specific access point?

Configuration errors

Incorrect passphrases

Incorrect join keys

Incompatible EAP methods

 Loading...

16. What are the basic steps involved in the WLAN connection process for 802.11 wireless networks?

Authentication, Association, 802.1X/EAP authentication

Passive scanning, Active scanning, 4-way handshake

Authentication, Association, 4-way handshake

Passive scanning, Active scanning, 802.1X/EAP authentication

 Loading...

17. What is the term used to describe the interference caused when multiple devices use the same channel in RF communication?

Antenna pattern charts

Co-Channel Interference (CCI)

Passive antenna gain

Antenna mounting kits

 Loading...

18. Some APs come with a captive portal available within the AP, controller or cloud interface. For what would this captive portal most likely be used?

Guest access

Employee access

Executive management access

Long-term contractor access

 Loading...

19. When configuring an AP or controller, what is the collection of settings that define radio operations and the parameters for the BSS?

WLAN profile

LAN configuration

Admin account credentials

WAN configuration

 Loading...

20. 1.Which type of mount is commonly used for installing an 802.11 AP on a pole or mast?

Wall mount

Pole/mast mount

Ceiling mount

Floor mount

 Loading...

Page 3 of 5

21. Which factor can contribute to security issues in a wireless network if the passphrase is not properly configured?

Configuration errors

Incorrect passphrases

Incompatible EAP methods

Incorrect network keys

 Loading...

22. A device is a 3x2:2 device.

How many spatial streams can it receive?

3

9

6

2

 Loading...

23. Which security measure is often mistakenly believed to provide network invisibility, but offers no actual security benefit?

WEP

Shared Key Authentication

Hidden SSIDs

MAC filtering

 Loading...

24. What are some common causes of connectivity problems in wireless networks?

Configuration errors

Low data rates

Driver issues

Feature incompatibility

 Loading...

25. Which factor can contribute to low data rates in a wireless network?

Interference

Co-channel interference (CCI)

Configuration errors

Low signal strength

 Loading...

26. What best describes passive scanning used to locate WLANs?

Listening for beacon frames from the APs

Scanning in only on frequency band

Sending probe requests and listening for probe responses

Scanning on only one channel

 Loading...

27. What is the maximum power that an 802.3at Power over Ethernet (PoE) injector can output in the Ethernet interface?

30 W

15.4 W

12.95 W

25.5 W

 Loading...

28. Which feature of an 802.11 AP determines the supported wireless frequency bands?

PHY and frequency band support

Single-band vs. dual-band

Output power control

Operational modes

 Loading...

29. How can a device report the strength of the RF signal it is receiving?

Wireless scanner tools

Client signal strength reports

RSSI vs. dBm

Output power vs. received signal strength

 Loading...

30. At what point is RF power typically stipulated in milliwatts?

At the receiver

Fifty feet from the transmitter

At the transmitter

One hundred feet from the transmitter

 Loading...

Page 4 of 5

31. What is the main difference between Personal and Enterprise security modes in 802.11 networks?

Personal mode requires individual user authentication, while Enterprise mode uses a centralized authentication server

Personal mode is more secure than Enterprise mode

Personal mode is only suitable for small networks, while Enterprise mode is for larger networks

Personal mode uses WPA, while Enterprise mode uses WPA2

 Loading...

32. What kind of AP mounting kit is most likely to use U-brackets?

Desktop mount

Ceiling mount

Pole/mast mount

Wall mount

 Loading...

33. What AP configuration option is often thought to provide security but actually provides no security because of the simple spoofing attack weakens it?

MAC filtering

WEP

Shared Key Authentication

SSID hiding

 Loading...

34. What are some common causes of performance problems in wireless networks?

Configuration errors

Interference

Low data rates

Co-channel interference (CCI)

 Loading...

35. An AP specifies that it requires 802.3af Power over Ethernet (PoE).

What is the maximum power this AP could draw?

25.5 W

30 W

15.4 W

12.95 W

 Loading...

36. Which process in the WLAN connection sequence establishes the encryption keys between the client device and the access point?

Authentication

Association

802.1X/EAP authentication

4-way handshake

 Loading...

37. What is the term used to describe the increase in signal strength provided by an antenna?

Antenna mounting kits

Passive antenna gain

Highly directional

Antenna cables and connectors

 Loading...

38. Which component of a wireless device needs to be configured for optimum performance, such as band preference and regulatory domain?

Supported channels

Channel widths

Transmit power

Client drivers

 Loading...

39. Which tool can be used to detect and analyze RF signals?

Amplitude scanner

Phase detector

Wireless scanner tools

Wavelength meter

 Loading...

40. Which RF feature determines the number of simultaneous channels a device can use for communication?

Supported channels

Channel widths

Transmit power

Receive sensitivity

 Loading...

Page 5 of 5

41. What process is used after authentication to generate and install encryption keys on 802.11 devices using WPA2?

802.1X port-based authentication

Passphrase to PSK mapping algorithm

EAP authentication

4-way handshake

 Loading...

42. Which security problem can occur if the network key used for authentication during the join process in a wireless network is incorrect?

Configuration errors

Incorrect passphrases

Incompatible EAP methods

Incorrect join keys

 Loading...

 Loading...