Study Online 101-500 Exam Dumps to Pass

Category:

Lpi Free Dumps

Comments:

0 Comments

Post Date:

February 18, 2023

101-500 dumps questions can help you identify areas where you need to focus your studies. As you answer questions, you will be able to see which topics you are comfortable with and which ones you need to spend more time studying. Lpi 101-500 dumps questions provide realistic practice for the certification exam. 101-500 dumps are designed to simulate the actual exam environment, and they will give you a chance to practice answering questions under time pressure. Study free Lpi 101-500 online dumps below.

Page 1 of 8

1. In compliance with the FHS, in which of the directories are man pages found?

/usr/share/man

/opt/man

/usr/doc/

/var/pkg/man

/var/man

2. To what environment variable will you assign or append a value if you need to tell the dynamic linker to look in a build directory for some of a program's shared libraries?

LD_LOAD_PATH

LD_LIB_PATH

LD_LIBRARY_PATH

LD_SHARE_PATH

LD_RUN_PATH

3. Which of the following are filesystems which can be used on Linux root partitions? (Choose two.)

NTFS

ext3

XFS

VFAT

swap

4. Which of the following commands will write a message to the terminals of all logged in users?

bcast

mesg

wall

yell

5. When planning a partition scheme, which of the following directories could be considered for separate partitions? (Choose three.)

/etc

/home

/var

/lib

/opt

6. What happens after issuing the command vi without any additional parameters?

vi starts and loads the last file used andmoves the cursor to the position where vi was when it last exited.

vi starts and requires the user to explicitly either create a new or load an existing file.

vi exits with an error message as it cannot be invoked without a file name to operate on.

vi starts in command mode and opens a new empty file.

vi starts and opens a new file which is filled with the content of the vi buffer if the buffer contains text.

7. Which of the following commands will produce the following output?

jobs

proclist

netstat

8. Which of the following commands converts spaces in a file to tab characters and prints the result to standard output?

iconv

expand

unexpand

tab

9. CORRECT TEXT

Following the Filesystem Hierarchy Standard (FHS), where should binaries that have been compiled by the system administrator be placed in order to be made available to all users on the system?

10. When using rpm --verify to check files created during the installation of RPM packages, which of the following information is taken into consideration? (Choose THREE correct answers.)

Timestamps

MD5 checksums

Inodes

File sizes

GnuPG signatures

Page 2 of 8

11. Which of the following commands creates an ext3 filesystem on /dev/sdb1? (Choose TWO correct answers.)

/sbin/mke2fs -j /dev/sdb1

/sbin/mkfs -t ext3 /dev/sdb1

/sbin/mkfs -c ext3 /dev/sdb1

/sbin/mke3fs -j /dev/sdb1

12. Which of the following describes the correct order in which the components of the system boot process are started?

BIOS, kernel, bootloader, init system

BIOS, bootloader,kernel, init system

Bootloader, BIOS, kernel, init system

BIOS, bootloader, init system, kernel

Bootloader, BIOS, init system, kernel

13. CORRECT TEXT

Which program runs a command in specific intervals and refreshes the display of the program’s output? (Specify ONLY the command without any path or parameters.)

14. Which of the following commands instructs SysVinit to reload its configuration file?

reinit

initreload

telinit 7

telinit q

init reinit

15. Which command uninstalls a package but keeps its configuration files in case the package is re-installed?

dpkg Cs pkgname

dpkg CL pkgname

dpkg CP pkgname

dpkg Cv pkgname

dpkg Cr pkgname

16. Which of the following statements is correct when talking about /proc/?

All changes to files in /proc/ are stored in /etc/proc.d/ and restored on reboot.

All files within /proc/ are read-only and their contents cannot be changed.

All changes to files in /proc/ are immediately recognized by the kernel.

All files within /proc/ are only readable by the root user.

17. Which type of filesystem is created by mkfs when it is executed with the block device name only and without any additional parameters?

ext2

ext3

ext4

XFS

VFAT

18. CORRECT TEXT

Which command shows all shared libraries required by a binary executable or another shared library? (Specify ONLY the command without any path or parameters.)

19. CORRECT TEXT

What command changes the nice level of a running process? (Specify ONLY the command without any path or parameters)

20. CORRECT TEXT

Which command reads and displays the current contents of the Kernel Ring Buffer on the command line? (Specify ONLY the command without any path or parameters.)

Page 3 of 8

21. The command dbmaint & was used to run dbmaint in the background. However, dbmaint is terminated after logging out of the system.

Which alternative dbmaint invocation lets dbmaint continue to run even when the user running the program logs out?

job Cb dmaint

dbmaint &>/dev/pts/null

nohup dbmaint &

bg dbmaint

wait dbmaint

22. Which of the following commands brings a system running SysV init into a state in which it is safe to perform maintenance tasks? (Choose TWO correct answers.)

shutdown -R 1 now

shutdown -single now

init 1

telinit 1

runlevel 1

23. Which Bash environment variable defines in which file the user history is stored when exiting a Bash process? (Specify ONLY the variable name.)

24. Which of the following commands print the current working directory when using a Bash shell? (Choose two.)

echo “${PWD}”

echo “${WD}”

pwd

printwd

echo “${pwd}”

25. You are trying to make a hard link to an ordinary file but ln returns an error.

Which of the following could cause this?

The source file is hidden.

The source file is read-only.

The source file is a shell script.

You do not own the source file.

The source and the target are on different filesystems.

26. Which of the following files, located in a user’s home directory, contains the Bash history?

.bashrc_history

.bash_histfile

.history

.bash_history

.history_bash

27. What does the command mount --bind do?

It makes the contents of one directory available in another directory

It mounts all available filesystems to the current directory

It mounts all user mountable filesystems to the user’s home directory

It mounts all file systems listed in /etc/fstab which have the option userbind set

It permanently mounts a regular file to a directory

28. Which command will uninstall a package but leave its configuration files in case the package is re-installed?

dpkg Cs pkgname

dpkg CL pkgname

dpkg CP pkgname

dpkg Cr pkgname

29. Which of the following commands can be used to determine how long the system has been running? (Choose TWO correct answers.)

uptime

top

uname -u

time Cup

30. The system is having trouble and the engineer wants to bypass the usual /sbin/init start up and run /bin/sh.

What is the usual way to pass this change to the kernel from your boot loader?

Start in runlevel 1.

Pass init=/bin/sh on the kernel parameter line.

Pass /bin/sh on the kernel parameter line.

Pass start=/bin/sh on the kernel parameter line.

Page 4 of 8

31. CORRECT TEXT

Which file in the /proc filesystem lists parameters passed from the bootloader to the kernel? (Specify the file name only without any path.)

32. Which of the following is a limitation of the cut command?

Thecutcommand can only select output by field position.

Thecutcommand cannot reorder fields.

Thecutcommand only works on ASCIItext.

Thecutcommand cannot use different input and output delimiters.

33. Which of the following files, located in the user home directory, is used to store the Bash history?

.bash_history

.bash_histfile

.history

.bashrc_history

.history_bash

34. What is the default nice level when a process is started using the nice command?

-10

35. Which file should be edited to select the network locations from which Debian installation package files are loaded?

/etc/dpkg/dpkg.cfg

/etc/apt/apt.conf

/etc/apt/apt.conf.d

/etc/apt/sources.list

/etc/dpkg/dselect.cfg

36. Which of the following commands determines the type of a file by using a definition database file which contains information about all common file types?

magic

type

file

pmagic

hash

37. Which of the following statements is correct for a command line ending with a & character?

The command’s output is redirected to/dev/null.

The result of the command defines if the next command will be run.

Thecommand is run in background of the current shell.

The command is run as a direct child of theinitprocess.

38. When in Normal mode invi, which character can be used to begin a reverse search of the text?

39. CORRECT TEXT

What is the name of the main configuration file for GNU GRUB? (Specify the file name only without any path.)

40. Which of the following command lines creates or, in case it already exists, overwrites a file called data with the output of ls?

ls 3> data

ls >& data

ls > data

ls >> data

Page 5 of 8

41. What is the difference between the i and a commands of the vi editor?

i (interactive) requires the user to explicitly switch between vi modes whereas a (automatic) switches modesautomatically.

i (insert) inserts text before the current cursor position whereas a (append) inserts text after the cursor.

i (independent rows) starts every new line at the first character whereas a (aligned rows) keeps the indentation of the previous line.

i (interrupt) temporarily suspends editing of a file to the background whereas a (abort) terminates editing.

42. Which of the following commands will change all CR-LF pairs in an imported text file, userlist.txt, to Linux standard LF characters and store it as newlist.txt?

tr ‘r
’ ‘’ < userlist.txt > newlist.txt

tr Cc ‘
r’ ‘’ < newlist.txt > userlist.txt

tr Cd ‘r’ < userlist.txt > newlist.txt

tr ‘r’ ‘
’ userlist.txt newlist.txt

tr Cs ‘^M’ ‘^J’ userlist.txt newlist.txt

43. Which of the following commands is used to modify quota settings? (Choose two.)

editquota

setquota

edquota

quotaedit

quotaset

44. CORRECT TEXT

Which world-writable directory should be placed on a separate partition in order to prevent users from being able to fill up the / filesystem? (Specify the full path to the directory.)

45. When considering the use of hard links, what are valid reasons not to use hard links?

Hard links are not available on all Linux systems because traditional filesystems, such as ext4, do not support them

Each hard link has individual ownership, permissions and ACLs which can lead to unintended disclosure of file content

Hard links are specific to one filesystem and cannot point to files on another filesystem

If users other than root should be able to create hard links, suln has to be installed and configured

When a hard linked file is changed, a copy of the file is created and consumes additional space

46. When piping the output of find to the xargs command, what option to find is useful if the filenames have spaces in them?

Crep-space

Cprint0

Cnospace

Cignore-space

47. When given the following command line.

echo "foo bar" | tee bar | cat Which of the following output is created?

cat

foo bar

tee bar

bar

foo

48. Which of the following Linux filesystems preallocates a fixed number of inodes at the filesystem's make/creation time and does NOT generate them as needed? (Choose TWO correct answers.)

ext3

JFS

ext2

XFS

procfs

49. CORRECT TEXT

Which program updates the database that is used by the locate command?

50. When redirecting the output of find to the xargs command, what option to find is useful if the filenames contain spaces?

Crep-space

-printnul

-nospace

Cignore-space

Cprint0

Page 6 of 8

51. When using regular expressions, which of the following characters match the beginning of a line?

52. Which of the following files exist in a standard GRUB 2 installation? (Choose two.)

/boot/grub/stages/stage0

/boot/grub/i386-pc/1vm.mod

/boot/grub/fstab

/boot/grub/grub.cfg

/boot/grub/linux/vmlinuz

53. Which of the following file permissions belong to a symbolic link?

-rwxrwxrwx

+rwxrwxrwx

lrwxrwxrwx

srwxrwxrwx

54. A user accidentally created the subdirectory dir in his home directory.

Which of the following commands will remove that directory?

rmdir '~/dir'

rmdir "~/dir"

rmdir ~/'dir'

rmdir ~/dir

rmdir ~/\dir

55. CORRECT TEXT

Which command is used to create and initialize the files used to store quota information?

(Specify ONLY the command without any path or parameters.)

56. Which of the following commands will display the inode usage of each mounted filesystem?

du Ci

df Ci

lsfs Ci

printfs Ci

57. Which of the following properties of a Linux system should be changed when a virtual machine is cloned? (Choose two.)

The partitioning scheme

The file system

The D-Bus Machine ID

The permissions of /root/

The SSH host keys

58. Which grep command will print only the lines that do not end with a / in the file foo?

grep'/$' foo

grep '/#' foo

grep -v '/$' foo

grep -v '/#' foo

59. Which of the following kernel parameters instructs the kernel to suppress most boot messages?

silent

verbose=0

nomesg

quiet

60. Consider the following directory:

drwxrwxr-x 2 root sales 4096 Jan 1 15:21 sales

Which command ensures new files created within the directory sales are owned by the group sales? (Choose two.)

chmod g+s sales

setpol CR newgroup=sales sales

chgrp Cp sales sales

chown --persistent *.sales sales

chmod 2775 sales

Page 7 of 8

61. Which of the following apt-get commands will install the newest versions of all currently installed packages?

auto-update

full-upgrade

dist-upgrade

install

update

62. Which shell command is used to continue background execution of a suspended command?

cont

exec

63. Which of the following are valid stream redirection operators within Bash? (Choose THREE correct answers.)

<<<

>>>

64. Which character, added to the end of a command, runs that command in the background as a child process of the current shell?

65. Topic 5, New Questions Mix

What is true regarding the configuration of yum? (Choose two.)

Changes to the repository configuration become active after running yum confupdate

Changes to the yum configuration become active after restarting the yumd service

The configuration of package repositories can be divided into multiple files

Repository configurations can include variables such as $basearch or $releasever

In case /etc/yum.repos.d/ contains files, /etc/yum.conf is ignored

66. Consider the following output from the command ls Ci:

How would a new file named c.txt be created with the same inode number as a.txt (Inode 525385)?

ln Ch a.txt c.txt

ln c.txt a.txt

ln a.txt c.txt

ln Cf c.txt a.txt

ln Ci 525385 c.txt

67. In compliance with the FHS, in which of the following directories are documentation files found?

/usr/share/documentation

/usr/local/share/documentation

/var/share/doc

/usr/share/doc

/etc/share/doc

68. Which of the following directories on a 64 bit Linux system typically contain shared libraries? (Choose two.)

~/.lib64/

/usr/lib64/

/var/lib64/

/lib64/

/opt/lib64/

69. From a Bash shell, which of the following commands directly executes the instruction from the file /usr/local/bin/runme.sh without starting a subshell? (Please select TWO answers.)

source /usr/local/bin/runme.sh

. /usr/local/bin/runme.sh

/bin/bash /usr/local/bin/runme.sh

/usr/local/bin/runme.sh

run /usr/local/bin/runme.sh

70. What of the following statements are true regarding /dev/ when using udev? (Choose TWO correct answers.)

Entries for all possible devices get created on boot even if those devices are not connected.

Additional rules for udev can be created by adding them to /etc/udev/rules.d/.

When using udev, it is not possible to create block orcharacter devices in /dev/ using mknod.

The /dev/ directory is a filesystem of type tmpfs and is mounted by udev during system startup.

The content of /dev/ is stored in /etc/udev/dev and is restored during system startup.

Page 8 of 8

71. Which of the following is true when a file system, which is neither listed in /etc/fstab nor known to system, is mounted manually?

systemd ignores any manual mounts which are not done using the systemctl mount command

The command systemctl mountsync can be used to create a mount unit based on the existing mount

systemd automatically generates a mount unit and monitors the mount point without changing it

Unless a systemd mount unit is created, systemd unmounts the file system after a short period of time

systemctl unmount must be used to remove the mount because system opens a file descriptor on the mount point

72. Which function key is used to start Safe Mode in Windows NT?

F10

Windows NT does not support Safe Mode

73. A faulty kernel module is causing issues with a network interface card.

Which of the following actions ensures that this module is not loaded automatically when the system boots?

Using lsmod --remove --autoclean without specifying the name of a specific module

Using modinfo Ck followed by the name of the offending module

Using modprobe Cr followed by the name of the offending module

Adding a blacklist line including the name of the offending module to the file /etc/modprobe.d/blacklist.conf

Deleting the kernel module’s directory from the file system and recompiling the kernel, including its modules

74. CORRECT TEXT

Typically, which top level system directory is used for files and data that change regularly while the system is running and are to be kept between reboots? (Specify only the top level directory)

TAGS:

101-500, 101-500 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

Lpi Free Dumps

Get 101-500 Dumps Full Version

Q&As: 283
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Study Online 101-500 Exam Dumps to Pass

Related

Posts

Use 306-300 Dumps to Obtain Lpi Certification

300-300 Dumps Guarantee You Pass 300-300 Exam Easily

303-300 Dumps Questions Increase Your Chance of Success

Good 303-300 Exam Dumps Save Your Preparation Time

About Us

EMAIL

Services

Opening Hours