Improve Your Knowledge with NCP-MCI-6.10 Exam Dumps

Practicing with NCP-MCI-6.10 questions can help you identify areas where you need to improve your knowledge. By answering NCP-MCI-6.10 questions and reviewing your responses, you can identify gaps in your understanding and focus your study efforts on those areas. The NCP-MCI-6.10 exam has a strict time limit, and you need to manage your time effectively to answer all the questions. Practicing with Nutanix NCP-MCI-6.10 dumps questions can help you develop time management skills by simulating the exam's time constraints. You'll learn how to pace yourself, manage your time effectively, and ensure that you complete the NCP-MCI-6.10 exam within the allotted time. Test Nutanix NCP-MCI-6.10 exam free dumps below.

Page 1 of 3

1. An administrator attempted to enable Data-in-Transit Encryption on a Scale-Out Prism Central cluster to encrypt service-level traffic between nodes. However, the feature did not work correctly due to a firewall restriction.

Which CVM-specific port should be allowed through the firewall for Data-in-Transit Encryption?

2009

2010

2020

9440

 Loading...

2. An administrator is configuring Nutanix Disaster Recovery (DR) for a cross-hypervisor setup (ESXi to AHV) but finds that guest VMs do not recover properly at the DR location.

What is required for a successful cross-hypervisor DR event?

Utilize delta disks.

Deploy Legacy BIOS boot on hosts within the cluster.

Use raw device mappings.

Nutanix Guest Tools (NGT) must be installed on source guest VMs.

 Loading...

3. After upgrading Prism Central from PC2022.1 to PC2024.1, an administrator is unable to log in with their IAM domain account.

What is the first troubleshooting step the administrator should take?

Ping the Domain Controller from the CV

Ensure port 9441 is open in the firewall.

Validate the trusted signing certificate of the organization.

Log in with a local admin account.

 Loading...

4. A security team asks an administrator to set up port mirroring of a specific source VM to a target VM.

What must the administrator ensure for this configuration to be possible?

Source VM and Target VM are on the same VLA

Source VM and Target VM are on the same host.

Source VM and Target VM are on the same subnet.

Source VM and Target VM are on the same VP

 Loading...

5. An administrator is working with a network engineer to design the network architecture for a DR failover.

Because DNS is well-designed, the DR site will use a different subnet but retain the same last octet in the IP address.

What is the best way to achieve this?

Use a custom script to update the IP address after instantiation in D

Set up IPAM so the address is dynamically assigned during D

Manually log into VMs after the DR event and update the last octet.

Utilize Recovery Plan Offset-based IP mapping.

 Loading...

6. An administrator wants to ensure that VMs can be migrated and restarted on another node in the event of a single-host failure.

What action should be taken in Prism Element to meet this requirement?

Set Redundancy Factor to 3.

Enable HA Reservation.

Configure a Protection Domain.

Configure an RF1 storage container.

 Loading...

7. Refer to Exhibit:





An administrator sees the alert shown in the exhibit.

What should the administrator do to ensure the nutanix user can no longer SSH to a CVM using a password?

Rename the nutanix user.

Block port 22 on the CVM firewall.

Enable Cluster Lockdown.

Delete the nutanix user.

 Loading...

8. In a scale-out Prism Central deployment, what additional functionality does configuring an FQDN instead of a Virtual IP provide?

Load balancing

Resiliency

Segmentation

SSL Certificate

 Loading...

9. An administrator notices high CPU usage on a VM and wants to determine whether adding more vCPUs would improve performance.

Which two metrics should be analyzed to make this decision? (Choose two.)

VM CPU Ready Time

VM CPU Usage

Host CPU Usage

Host Memory Swap Out Rate

 Loading...

10. In a five-node cluster, an administrator noticed that three VMs are consuming too many resources on a single host.

Acropolis Dynamic Scheduling (ADS) is not able to migrate these VMs.

What is the most likely reason preventing ADS from migrating these VMs?

VMs use a Volume Group.

VMs use GPU pass-through.

VM-VM anti-affinity policy is set.

VMs use external Network Attached Storage.

 Loading...

Page 2 of 3

11. An administrator has been tasked with performing firmware upgrades for all Nutanix sites.

When attempting to perform firmware upgrades via Life Cycle Manager (LCM) at a remote site with a single-node cluster, no firmware updates are listed as available. The administrator confirmed that the currently installed firmware is several revisions behind.

Why are no firmware upgrades listed in LCM for this cluster?

Single-node clusters only support one-disk firmware upgrades.

LCM is not supported on single-node clusters.

LCM cannot perform firmware upgrades on single-node clusters.

LCM does not have connectivity to the internet.

 Loading...

12. A Disaster Recovery administrator has set up a Protection Policy for 50 workloads, all configured similarly.

The RPO is 60 minutes with a specified retention of 10 local copies, 5 remote copies, and crash consistency.

After activation, recovery points are not appearing at the DR site, even though they are visible on the production side.

What is the most likely issue?

Nutanix Guest Tools (NGT) is not installed on the source VMs.

Windows updates need to be applied to all affected VMs.

The storage container name on the DR cluster does not match the production cluster.

The storage container RF factor does not match in both clusters.

 Loading...

13. What is required to create a category in Nutanix?

A name and a value

A policy and an entity

A service and a scope

A catalog and a template

 Loading...

14. An administrator wants to enable application discovery on a Nutanix cluster to monitor applications.

A Prism Central instance is already configured with sufficient CPU and memory.

What other prerequisites must be met before enabling application discovery? (Choose two.)

Sufficient Prism Central VM resources

Internet connection

API key and key ID

Network controller is enabled

 Loading...

15. An administrator is responsible for resource planning and needs to plan for resiliency of a 10-node RF3 cluster. The cluster has 100TB of storage.

How should the administrator plan for capacity in the event of future failures?

Set Reserve Storage Capacity (%) to 20.

Set Reserve Capacity for Failure to None.

Set Reserve Capacity for Failure to Auto Detect.

Set Reserve Memory Capacity (%) to 20.

 Loading...

16. A company is evaluating Nutanix Disaster Recovery (DR) to protect multiple business-critical applications. Some applications are built using a 3-tier architecture and have interdependencies. After failover, the VM's static IP address is retained, but DNS configuration is lost.

How should an administrator proceed to resolve this issue?

Configure Self-Service Restore.

Create custom in-guest scripts to preserve the statically assigned DNS IP addresses.

Install Network Manager command-line tool (nncli) in the protected Windows VMs.

Configure a Protection Domain.

 Loading...

17. If an administrator creates a report with no retention policy configured, how many instances of the report are retained by default?

5

10

15

20

 Loading...

18. An administrator configured a remote site for Protection Domain replication, but network performance and stability are impacted.

How can the remote site configuration be adjusted to fix the issue?

Configure Network Address Translation (NAT) between the two Nutanix clusters.

Configure the Protection Domain with many-to-many replication.

Configure a Bandwidth Throttling Policy.

Configure the remote Cluster VIP as a proxy.

 Loading...

19. After adding new workloads, the Overall Runway is now below 365 days, but the scenario still shows the cluster is in good shape.

Why?

Because Storage Runway is still good.

Because new workloads are sustainable.

Because there are recommended resources.

Because the Target is 1 month.

 Loading...

20. An administrator needs to optimize a VM’s storage by leveraging compression features. The VM’s vDisks are currently stored in a default storage container with no optimizations enabled.

How should the administrator proceed?

Migrate vDisks to the Production storage container.

Recreate the VM in the Production storage container and copy data.

Migrate the VM to the Production storage container.

Recreate the vDisk in the Production storage container and copy data.

 Loading...

Page 3 of 3

21. An administrator is preparing for a firmware upgrade on a host and wants to manually migrate VMs before executing the LCM upgrade. However, one VM is unable to migrate while others migrate successfully.

Which action would fix the issue?

Enable Acropolis Dynamic Scheduling (ADS) at the cluster level.

Update Link Layer Discovery Protocol (LLDP).

Disable Agent VM within the VM configuration options.

Configure backplane port groups that are assigned to the CV

 Loading...

22. Refer to Exhibit:





An administrator notices the message shown in the exhibit when navigating to LCM from Prism Central.

Which action should the administrator take to update LCM to the latest version?

Run an AOS upgrade.

Run an AHV upgrade.

Perform an Inventory Scan.

Download and install the latest LCM version from a CV

 Loading...

23. Refer to the Exhibit:





An administrator needs to create two virtual machines: VM4 and VM5 that leverage the memory over-commit feature.

Once VM4 is created and running, the administrator notices that it uses only 28GB of RAM.

What will be the maximum RAM that can be allocated to VM5 so that it can be powered on?

4GB

8GB

16GB

32GB

 Loading...

 Loading...