Advance Your Career by Using Online HPE6-A89 Dumps

Obtaining the HPE Advanced Product Certified - Comware HPE6-A89 certification can help you demonstrate your expertise in HP solutions and advance your career in related industry. Using HPE6-A89 dumps as part of your study plan can help you identify knowledge gaps, improve your exam-taking skills, provide immediate feedback, and increase your chances of passing the HPE6-A89 exam. HP HPE6-A89 exam free dumps questions are available below.

Page 1 of 3

1. Which of the following statements is true about External BGP (eBGP) neighbors?

They must reside in the same autonomous system

They use UDP for updates

They typically have a default TTL of 1 hop

They require GRE tunnels to exchange routes

 Loading...

2. Which of the following describes a static route?

Automatically learned from neighboring routers

Generated by OSPF protocol

Manually configured and does not change unless reconfigured

Created when a VLAN interface is assigned an IP

 Loading...

3. Scenario: You are backing up the configuration of a Comware switch to an external TFTP server. You want to verify that the backup file is saved in flash memory.

What command should you run to list saved files on the device?

display files

display flash:

dir flash:

show flash

 Loading...

4. Which command would you use to apply a QoS policy to an interface?

apply qos-profile

traffic-policy apply

qos enable interface

class-map bind

 Loading...

5. Which command in Comware enables a BGP process for a router in AS 65001?

router bgp enable 65001

bgp instance 65001

bgp 65001

bgp enable as 65001

 Loading...

6. Which command displays the current system software version running on an HPE Comware switch?

display version

show system-info

display startup

show running-config

 Loading...

7. Which field can not be matched in a standard ACL on Comware?

Source IP

Time-range

Destination IP

Packet length

 Loading...

8. What is the primary purpose of using multiple OSPF areas?

To reduce the size of the routing table and improve scalability

To increase packet forwarding speed

To allow static routes to take priority over dynamic routes

To enable NAT for internal networks

 Loading...

9. Which prompt indicates that a user is in the system view of a Comware device?

[Device]

(Device)#

Device(config)#

 Loading...

10. What is the function of a Designated Port in STP?

Provides a backup path

Learns but does not forward frames

Forwards frames toward the root bridge

Forwards frames away from the segment

 Loading...

Page 2 of 3

11. Scenario: You configure a static route on your Comware switch using:

ip route 10.10.10.0 255.255.255.0 192.168.1.1

However, traffic to 10.10.10.0/24 is not being routed.

You verify the configuration is correct.

What is the likely cause?

The VLAN interface is down

There is no route to 192.168.1.1

You forgot to enable STP

The firewall is blocking the traffic

 Loading...

12. Which Comware feature limits the rate of traffic received on an interface?

Traffic shaping

Congestion avoidance

CAR (Committed Access Rate)

WRR (Weighted Round Robin)

 Loading...

13. Scenario: After making several configuration changes on a Comware switch, an administrator wants to ensure these changes are retained after a reboot.

Which command should be executed?

write memory

save

copy running-config startup-config

commit

 Loading...

14. Which command tests basic IP connectivity from a Comware switch?

traceroute

ping

display ip route

ip test

 Loading...

15. Scenario: Two Comware switches are part of an IRF fabric. The master switch fails unexpectedly.

What happens next in the IRF topology?

The fabric shuts down

The backup switch takes over as the new master

All VLANs are disabled until recovery

Manual intervention is required to restore operations

 Loading...

16. What must exist between all non-backbone areas in an OSPF network?

A virtual link

Static route fallback

A direct connection

A common router ID

 Loading...

17. What is the default queue scheduling method used in Comware for outbound traffic?

FIFO

PQ

WFQ

WRR

 Loading...

18. Scenario: You are tasked with configuring secure remote access for all administrators on an HPE Comware switch. The current configuration allows plain text access through Telnet.

What is your first recommended action to enhance security?

Block Telnet using an ACL

Enable SSH and disable Telnet

Change the Telnet port number

Upgrade firmware

 Loading...

19. Which command is used to configure a static route on a Comware switch?

ip static-route 192.168.2.0 255.255.255.0 192.168.1.1

ip route 192.168.2.0 255.255.255.0 192.168.1.1

route add 192.168.2.0/24 via 192.168.1.1

add ip route 192.168.2.0/24 192.168.1.1

 Loading...

20. Scenario: You configure BGP on two Comware routers in different ASes (65001 and 65002). Despite correct IP reachability, the neighbor relationship is not forming.

Which command might resolve the issue?

ttl-security hops 1

peer ebgp-max-hop 2

bgp router-id 1.1.1.1

undo bgp

 Loading...

Page 3 of 3

21. Which command is used to assign an IP address to a VLAN interface on a Comware switch?

interface vlan 10 ip address 192.168.1.1 255.255.255.0

ip address 192.168.1.1 255.255.255.0 vlan 10

interface Vlan-interface 10 then ip address 192.168.1.1 255.255.255.0

interface vlanif 10 then set ip-address

 Loading...

22. What must be configured after assigning a port to a VLAN in access mode?

PVID

Trunk tag list

VLAN IP address

Link aggregation

 Loading...

23. Which command verifies the current IRF topology and role of each switch?

display irf

show stacking status

display irf topology

show irf-members

 Loading...

24. What is the default Spanning Tree mode on most HPE Comware switches?

MSTP

RSTP

STP

Disabled

 Loading...

25. Which of the following determines the root bridge in an STP topology?

Switch uptime

MAC address

Bridge priority + MAC address

Port speed

 Loading...

26. In BGP, what is the primary purpose of the AS-PATH attribute?

Determines interface cost

Identifies loop-free routing

Assigns route priority based on bandwidth

Determines OSPF area

 Loading...

27. Scenario: A junior network engineer configures a user account on a Comware switch but forgets to assign a privilege level. The engineer reports they cannot execute administrative commands after logging in.

What is the likely cause?

The switch is in user view mode only

SSH key was not imported

The user is at privilege level 1

No console port is available

 Loading...

28. What is the function of the PVID on a trunk port?

Assigns default IP address

Determines the VLAN for untagged frames

Blocks tagged VLANs

Enables STP on the VLAN

 Loading...

 Loading...