Improve Your Knowledge with NCP-MCI-6.10 Exam Dumps

Category:

Comments:

0 Comments

Post Date:

May 18, 2025

Practicing with NCP-MCI-6.10 questions can help you identify areas where you need to improve your knowledge. By answering NCP-MCI-6.10 questions and reviewing your responses, you can identify gaps in your understanding and focus your study efforts on those areas. The NCP-MCI-6.10 exam has a strict time limit, and you need to manage your time effectively to answer all the questions. Practicing with Nutanix NCP-MCI-6.10 dumps questions can help you develop time management skills by simulating the exam's time constraints. You'll learn how to pace yourself, manage your time effectively, and ensure that you complete the NCP-MCI-6.10 exam within the allotted time. Test Nutanix NCP-MCI-6.10 exam free dumps below.

Page 1 of 4

1. A company is evaluating Nutanix Disaster Recovery (DR) to protect multiple business-critical applications. Some applications are built using a 3-tier architecture and have interdependencies. After failover, the VM's static IP address is retained, but DNS configuration is lost.

How should an administrator proceed to resolve this issue?

Configure Self-Service Restore.

Create custom in-guest scripts to preserve the statically assigned DNS IP addresses.

Install Network Manager command-line tool (nncli) in the protected Windows VMs.

Configure a Protection Domain.

2. An administrator receives complaints about VM performance.

After reviewing the VM’s CPU Ready Time data, which step should the administrator take to diagnose the issue further?

Check the number of vCPUs assigned to each CV

Review host CPU utilization.

Assess cluster SSD capacity.

Enable VM memory oversubscription.

3. Which two URLs must be accessible from a Connected Site’s Controller VMs to allow Life Cycle Manager (LCM) to download software updates?

download.nutanix.com

mynutanix.com

release-api.nutanix.com

portal.nutanix.com

4. A user created a report in the Intelligent Operations Analysis Dashboard but forgot to download it. However, after logging back into Prism Central, the administrator finds that the report is no longer available.

What is the most likely cause?

A user with Cluster Viewer role deleted the report.

The user-generated report was archived.

Reports are automatically deleted after 24 hours.

The report is stored in the cluster’s Prism Element.

5. Refer to Exhibit:

An administrator sees the alert shown in the exhibit.

What should the administrator do to ensure the nutanix user can no longer SSH to a CVM using a password?

Rename the nutanix user.

Block port 22 on the CVM firewall.

Enable Cluster Lockdown.

Delete the nutanix user.

6. An administrator is receiving repeated approval requests to delete a protected snapshot that has

already been approved.

What is the likely cause?

There is an error with the SMTP server.

The Policy Engine wasn't implemented.

The administrator is an approver on the approval policy.

There are multiple approvers on the approval policy.

7. An administrator needs to perform an LCM upgrade on an AHV host with GPUs.

What additional step is required before upgrading the host?

Create an agent VM on each host that has GPU drivers installed.

Run LCM in dark site mode so it can update AHV independently.

Use Direct Uploads to upload appropriate driver bundles.

Update NCC to the latest version and re-run Inventory.

8. After adding new workloads, the Overall Runway is now below 365 days, but the scenario still shows the cluster is in good shape.

Why?

Because Storage Runway is still good.

Because new workloads are sustainable.

Because there are recommended resources.

Because the Target is 1 month.

9. Which prerequisite should be met before any LCM updates are performed?

Update AOS

Update Foundation

Update AHV

Update BIOS

10. An administrator is planning for an upcoming maintenance window. The administrator would like to minimize the chance of an upgrade failure during the maintenance window to ensure the updates will complete without issue.

What action should the administrator take to reduce the risk of any potential failures during an upgrade?

Upgrade AOS to the latest version from LC

Run an Upgrade Precheck from LC

Reboot each CVM one-at-a-time to ensure the reboots are successful.

Reboot each host one-at-a-time to ensure the reboots are successful.

Page 2 of 4

11. An administrator needs to set up a protection policy in preparation for a Disaster Recovery (DR) test.

What is the first step required to satisfy this task?

Install NGT (Nutanix Guest Tools) on VMs where applications are supported.

Create an Availability Zone between Production and D

Convert the source cluster to AH

Create a point-in-time snapshot of source VMs.

12. What guest customization options are available when creating a VM template?

Sysprep, Cloud-init, Custom Script, Guided Script

Bash, Powershell

Python, YAML

None, guest customization is not supported in Nutanix templates.

13. Due to application requirements, an administrator needs to support a multicast configuration in an AHV cluster.

Which AHV feature can be used to optimize network traffic so that multicast traffic is only forwarded to the VMs that need to receive it?

LACP

UDP

IGMP Snooping

Network Segmentation

14. An administrator is configuring Protection Policies to replicate VMs to a Nutanix Cloud Cluster (NC2) over the internet.

To comply with security policies, how should data be protected during transmission?

Configure Data on a self-encrypting drive.

Configure VMs to use UEFI Secure Boot.

Enable Data-at-Rest Encryption.

Enable Data-in-Transit Encryption.

15. Refer to the exhibit.

LCM Framework Check

A Lcm prechecks detected 3 issues that would cause upgrade failures.

Check test lacp_configuration' failed: test_lacp_configuration: Unable to find Vcenter details for connection. Please refer to KB 14277 Check test esx_ha_enabled' failed: Unable to find Vcenter details for connection

Check test_es_entering_mm_pinned_vms' failed: Unable to find Vcenter details for connection X LCM Framework Check

An administrator is attempting to upgrade the NIC firmware on a Nutanix cluster and sees the error displayed in the exhibit.

Which log is the most appropriate to analyze the LCM precheck failure?

genesis.out

1cm_ops.out

1cm_wget.out

catalog.out

16. What can be used to easily group a set of VMs?

Catalog Items

Labels

Projects

Tags

17. An administrator needs to ensure that a VM is powered on before the rest of the VMs when starting a host.

Which configuration option allows this behavior?

Recovery Plan

Host Affinity

High Availability

Agent VM

18. What is supported for creating a VM Template in Nutanix?

VM is protected by Protection Domain-based D

VM is an agent or a Prism Central V

VM has disks located on RF2 containers.

VM runs on the ESXi hypervisor.

19. An administrator is tasked with protection of a business critical application. The application is running on a Linux VM and is using a custom DB that require application consistent snapshots for data integrity.

An administrator has written a pre_freeze and post_thaw scripts and placed them under /usr/local/sbin/.

During protection domain scheduled run an alert is generated:

Execution of the PostThaw Script Failed

Which two resolution steps could an administrator conduct to fix the issue? (Choose two.)

Ensure that scripts have nutanix user ownership and admin access.

Review the NGT logs under /usr/local/sbin/post_thaw.

Ensure NGT service is up and running.

Execute scripts manually and ensure they succeed

20. An administrator has been tasked with developing a Prism Central Recovery Plan for 50 workloads that will be assigned new IP addresses and will need to utilize a new DNS server upon instantiation of workloads in the Disaster Recovery (DR) location.

What is the best way to accomplish this?

Install Nutanix Guest Tools, this will allow Re-IP and automatically assign updated DNS server(s).

Enable scripting within Recovery Sequence & utilize custom script per V

Utilize recovery Plan to bring VMs online at DR and then manually login to each VM and update IP/DN

Update DNS settings on production VMs prior to execution of Recovery Plan.

Page 3 of 4

21. An administrator received a request to create a new storage container for persistent desktops.

Which storage optimization setting must the administrator set for the best possible capacity savings?

Erasure Coding

Inline compression with a delay of 0 minutes

Inline Deduplication of Read Caches

Post Process Deduplication

22. An administrator needs to create a storage container named TestData with the following conditions:

Replication Factor (RF) = 1 (RF1)

Inline Compression enabled

Deduplication disabled

Maximum storage capacity = 100 GiB

How should the administrator complete this task?

Log into Prism Element and create the storage container with an Advertised Capacity of 100 Gi

Log into Prism Element and create the storage container.

Log into Prism Central and create the storage container with a Reserved Capacity of 100 Gi

Log into Prism Central and create the storage container.

23. A new employee has inherited a partially configured Disaster Recovery (DR) schema. Source workloads have been identified and Nutanix Guest Tools has been installed.

There are two Protection Polices in place, one with an asynchronous schedule with a 1-hour RPO and a second policy utilizing synchronous replication. All of these workloads need to be recovered at a DR location and this will be orchestrated by Prism Central Recovery Plans.

What is the best way to setup this recovery orchestration?

Identify the workload startup order and create Recovery Plans corresponding to the startup order.

Setup a Recovery Plan for the asynchronous replication and convert the synchronous replication to a Protection Domain.

Setup two Recovery Plans, one for the asynchronous replication and one for the synchronous replication.

Setup a single Recovery Plan utilizing stages of recovery delays as needed.

24. An administrator using a dark site deployment for LCM is attempting to upgrade to the latest BIOS. After completing an inventory scan, the administrator does not see the expected BIOS version available for upgrade.

What is the most likely reason the latest BIOS is not shown?

AOS needs to be upgraded first.

The latest compatibility bundle has not been uploaded.

The BMC version needs to be upgraded first.

The dark site webserver is not accessible.

25. Refer to the Exhibit:

An administrator needs to create two virtual machines: VM4 and VM5 that leverage the memory over-commit feature.

Once VM4 is created and running, the administrator notices that it uses only 28GB of RAM.

What will be the maximum RAM that can be allocated to VM5 so that it can be powered on?

4GB

8GB

16GB

32GB

26. After upgrading Prism Central from PC2022.1 to PC2024.1, an administrator is unable to log in with their IAM domain account.

What is the first troubleshooting step the administrator should take?

Ping the Domain Controller from the CV

Ensure port 9441 is open in the firewall.

Validate the trusted signing certificate of the organization.

27. What happens if an agent VM is powered off and then manually started on another host?

Agent VM become unresponsive.

Agent VM cannot be migrated back to the original host.

Agent VM migrates back to the original host once it's powered on.

Agent VM migrates to another host automatically

28. An administrator notices high CPU usage on a VM and wants to determine whether adding more vCPUs would improve performance.

Which two metrics should be analyzed to make this decision? (Choose two.)

VM CPU Ready Time

VM CPU Usage

Host CPU Usage

Host Memory Swap Out Rate

29. An administrator has been tasked with justifying why Nutanix Disaster Recovery was chosen for a multi-tier application spanning multiple business units.

What is the most efficient way to organize and manage the workloads?

Utilize a VM naming schema that allows sorting

Utilize Categories to organize VMs in Recovery Plans

Utilize a 1:10 ratio of Recovery Plan to VMs

Utilize RESTful APIs to script creation of Recovery Plans

30. An administrator wants to clean up inactive VMs using VM Efficiency in Nutanix.

The business requires that VMs must be inactive for 120 days before deletion.

A Playbook was created to delete Dead and Zombie VMs with a 99-day wait period after they are marked inactive.

How long will have passed before these VMs are deleted? (Choose two.)

For Dead VMs, the wait before deletion is 120 days.

For Zombie VMs, the wait before deletion is 129 days.

For Dead VMs, the wait before deletion is 129 days.

For Zombie VMs, the wait before deletion is 120 days.

Page 4 of 4

31. Refer to Exhibit:

An administrator notices the message shown in the exhibit when navigating to LCM from Prism Central.

Which action should the administrator take to update LCM to the latest version?

Run an AOS upgrade.

Run an AHV upgrade.

Perform an Inventory Scan.

Download and install the latest LCM version from a CV

32. An administrator is trying to configure Metro Availability between Nutanix ESXi-based clusters.

However, the Compatible Remote Sites screen does not list all required storage containers.

Which two reasons could be a cause for this issue? (Choose two.)

Source and destination hardware are from different vendors.

The remote site storage container has compression enabled.

The destination storage container is not empty.

Both storage containers must have the same name.

33. In an RF2 cluster, what is the minimum number of nodes required to allow a host removal?

34. An administrator is managing a 4-node cluster with different hardware generations:

Two G5 Nodes → 2 CPUs (12 cores), 1 SSD (1.92 TB), 2 HDDs (4 TB).

Two G7 Nodes → 2 CPUs (16 cores), 2 SSDs (1.92 TB), 4 HDDs (4 TB).

The cluster will be decommissioned from production and used for Disaster Recovery (DR) purposes with an RPO of 1 hour.

What is the best approach when replacing G5 nodes without impacting performance?

New node must have at least 2 SSDs.

New node must be G7 or G8.

New node must have 2 CPUs with 12 cores.

New node must be hybrid.

35. An administrator has been asked to calculate baseline Capacity Runway on a newly registered AHV cluster.

The cluster has been running for 16 days, but no runway projections are displayed.

Why are no Capacity Runway projections being displayed?

Capacity Planning requires at least 30 days of data.

Capacity Planning requires at least 21 days of data.

Capacity Planning requires at least 3 months of data.

Capacity Planning requires at least 6 months of data.

36. An administrator configured a remote site for Protection Domain replication, but network performance and stability are impacted.

How can the remote site configuration be adjusted to fix the issue?

Configure Network Address Translation (NAT) between the two Nutanix clusters.

Configure the Protection Domain with many-to-many replication.

Configure a Bandwidth Throttling Policy.

Configure the remote Cluster VIP as a proxy.

37. An administrator needs to compare the performance of two VMs that are running on separate Nutanix clusters.

When creating an Analysis chart in Prism Central Intelligent Operations, the administrator discovers that it is not possible to add VM metrics for IOPS and CPU utilization to the same chart.

How should the administrator resolve this issue?

Create an Entity chart instead of a Metric chart.

Ensure that both VMs have the same number of vCPUs provisioned.

Migrate one of the VMs so that both VMs are running on the same cluster.

Create separate charts for metrics with different units of measurement

TAGS:

NCP-MCI-6.10, NCP-MCI-6.10 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get NCP-MCI-6.10 Dumps Full Version

Q&As: 121
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Improve Your Knowledge with NCP-MCI-6.10 Exam Dumps

Related

Posts

Online NCP-DB-6.10 Exam Dumps Help You Build Confidence

NCA-6.10 Dumps Questions Increase Your Chance of Success

NCP-US-6.10 Dumps Questions Increase Your Chance of Success

Use NCP-CN Dumps to Obtain Nutanix Certification

About Us

EMAIL

Services

Opening Hours