HPE2-T37 Dumps Guarantee You Pass HPE2-T37 Exam Easily

Category:

HP Free Dumps

Comments:

0 Comments

Post Date:

March 5, 2023

As new threats and vulnerabilities emerge, the HPE2-T37 exam is updated to reflect the latest trends in HPE Product Certified - OneView [2022]. By using HPE2-T37 exam dumps questions, you can ensure that you're staying up-to-date with the latest exam content and are fully prepared to address new challenges in Using HPE OneView. HP HPE2-T37 exam dumps questions can help you optimize your preparation and ensure that you're fully prepared for the exam. Practice free HP HPE2-T37 exam dumps questions below.

Page 1 of 3

1. You are deploying HPE OneView to manage a customer's HPE ProLiant servers

Is this statement about appliance availability true?

HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster

HPE OneView has a built-in HA feature that can be activated with an additional license

HPE OneView availability relies on HA features provoed by the hypervisor

During hpeoneView deployment customer may select configure proprietary HA mode.

2. Which types of support dump can be created using HPE OneView? (Select two.)

Enclosure group support dump

Appliance support dump

Firmware deployment support dump

Logical enclosure support dump

Maintenance console support dump

3. Which operation can be performed using HPE OneView for VMware vCenter Server?

Create a new distributed switch for cluster connectivity.

Configure VMware cluster properties for HA and DR

Deploy a new cluster node using OS Deployment Plan.

Create a new VMware cluster within vCenter Server.

4. Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template .

What could cause this profile to be inconsistent with the server profile template?

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

HPE OneView was restored from a backup that created inconsistency with the server profile template.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Changes to the server profile were implemented directly on the server profile.

5. Match each type of HPE OneView network with its appropriate description.

6. Which HPE components can be managed using HPE Composer? (select two.)

HPE Superdome Flex 280

HPE Synergy Virtual Connect SE 32Gb FC Module

HPE Synergy 480 Compute Modules

HPE B-series SN6600B Fibre Channel Switch

HPE MSA 2062 Storage Array

7. You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment.

From which level must this procedure be initiated?

Logical Interconnect Group

Logical Interconnect

Server Profile

Logical Enclosure

8. Which statement about M-LAG setup is true?

When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.

M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.

sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.

M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.

9. A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup .

How this task can be simplified while keeping the profile consistent?

Boot volumes can be created on demand and defined in the server profile template.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

An existing volume can be replicated automatically when creating a server profile.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

10. Your customer runs VMware ESXi on an HPE Synergy platform. The ESXi systems must have access to 50 VLANs initially. However, this is a dynamic environment, and more VLANs will be added in the future.

They want to add more networks for virtual machines, but they do not want to modify the HPE Virtual Connect configuration.

Which type of the network should the customer define?

Untagged

Internal

Tunnel

Tagged

Page 2 of 3

11. HOTSPOT

Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

12. You plan to update HPE OneVew to the latest version

What Should you do Mora starting HPE OneView update?

Disable HPE Remote Support at toe HPE OneView appliance level

Put all servers managed through HPE OneView to maintenance state

Run the Update Readiness checker tool to evaluate HPE OneView health status

Create a support dump for the appliance and for all managed logical interconnects

13. HOTSPOT

As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

14. What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?

IPMI credentials are configured for the iLO

REST API plugin is enabled for iLO

Active Directory configuration is performed on iLO

SSO certificate is added to the iLO

15. HOTSPOT

Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.

16. You plan to update HPE OneView to the latest version.

What should you do before starting the HPE OneView update?

Create an HPE OneView backup, either manually or to the remote location.

Put all servers managed through HPE OneView into maintenance state.

Create a support dump for the appliance and for all managed logical interconnects.

Disable HPE Remote Support at the HPE OneView appliance level.

17. You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.

What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

18. Your customer wants to manage their HPE Superdome Flex using HPE OneView.

Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

19. You are designing a management solution for five HPE Synergy frames in a primary data center and two additional frames at aproduction site, which is 80m away. Your C……about the cost and complexity of the proposed solution.

What can be done to simplify management and deployment of the remote frames?

Frames from the remote data center can be added to an existing Logical Enclosures using FLM links.

HPE OneView backup from the primary data center can be restored in the remote data center.

HPE OneView from the primary data center can be replicated and used to manage remote frames.

Frames from the remote data center can be added as a remote management ring.

20. You are creating a Logical Interconnect Group (LIG) that will be used to configure SAS connectivity .

What is the maximum number of frames that can be inducted in this LIG?

2 frames

4 frames

3 frames

1 frame

5 frames

Page 3 of 3

21. Which action is allowed on storage pools managed by HPE OneView?

Volume provisioning

Setting storage pool replication

Changing storage pool RAID level

Changing storage pool capacity

22. You want to add the latest IL0 firmware to an HPE OneView firmware repository .

How can you complete this task?

A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

An external repository must be created, because standalone components are supported only In an external repository.

ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.

23. Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.

A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.

A logical enclosure is created automatically, and it is always based on a single enclosure.

A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.

24. Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile .

What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network' selected, which hides them from ComputeModules.

The other networks are configured with a purpose other than General or Management.

25. Refer to the exhibit.

What does selecting the "Permanent" option mean?

Any write operation to the logical JBOD will be immediately written, bypassing the cache.

The logical JBOD will not be deleted, even when server profile is deleted.

Deleting the logical JBOD is possible only from the CLI with Administrator privileges.

To remove data from the logical JBOD, the "erase on delete" option must be selected.

26. HOTSPOT

Click the option that will allow you to update the firmware of master and satellite modules.

27. Why would you install an HPE OneView corticate to HPE BladeSystem Onboard Administrator?

to enable single sign-on functionality

to enable automatic firmware management

to enable licenses management

to enable access to REST API features

28. You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC .

What should you verify before adding HPE Primera to HPE OneView?

whether WSAPI service is enabled on HPE Primera array.

whether the appropriate license for HPE Primera Is available in HPE OneView.

whether array management using HPE OneView is enabled in SSM

whether there are at least two Fibre Channel networks defined in HPE OneView.

29. Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.

Which resource provided by HPE should you discuss with this customer?

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

30. How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

TAGS:

HPE2-T37, HPE2-T37 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

HP Free Dumps

Get HPE2-T37 Dumps Full Version

Q&As: 99
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

HPE2-T37 Dumps Guarantee You Pass HPE2-T37 Exam Easily

Related

Posts

HP HPE7-A07 Exam Questions Simulate Actual HPE7-A07 Exam

Test Online HPE7-A03 Dumps Questions to Be Certified

HPE0-S60 Dumps Guarantee You Pass HPE0-S60 Exam Easily

Pass HP2-I47 Exam to Get HP Certification

About Us

EMAIL

Services

Opening Hours