Good NCP-MCI-6.5 Exam Dumps Save Your Preparation Time

Category:

Comments:

0 Comments

Post Date:

March 22, 2023

Nutanix NCP-MCI-6.5 dumps questions are an essential tool for anyone looking to pursue the NCP-MCI certification. By using these NCP-MCI-6.5 dumps questions as part of your exam preparation, you can gain a deeper understanding of the exam format, identify knowledge gaps, build confidence, get real-time feedback, and stay up-to-date with the latest trends in Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam. So, if you're serious about achieving NCP-MCI-6.5 certification success, be sure to incorporate NCP-MCI-6.5 exam dumps questions into your study plan. Test free Nutanix NCP-MCI-6.5 exam dumps below.

Page 1 of 6

1. An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.

The application was installed on a VM with the following configuration:

• FOU vCPUs with one core/vCPU

• 4GB of Memory

• One 50GB vDisk for the Windows installation

• One 2TB vDisk for the application

What is the recommended configuration change to improve throughput?

Add 4GB of memory to the VM

Increase the vCPUs assigned to the VM

Span the 2TB disk across four vDisks

Increase the number of cores per vCPU

2. An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.

Which two actions should the administrator take when designing the Volume Group? (Choose two.)

Distribute workload across multiple virtual disks

Enable RSS (Receive Side Scaling)

Use multiple subnets for iSCSI traffic

Enable thick provisioning on the Volume Group(s)

3. How will an HDD failure affect VMs with data on the failed device?

The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.

A live migration will be initiated, moving the affected VMs to a host that contains the replica data.

The VMs will remain operational on that host and continue to function normally with no noticeable impact

An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.

4. Upon logging into Prism Central, an administrator notices high cluster latency.

How can the administrator analyze data with the least number of steps or actions?

Modify Data Density in the main Prism Central dashboard.

Click on the chart in the widget to expand the data elements.

Take note of the duster name and create a new Analysis chart.

Click the cluster name in the cluster quick access widget.

5. Refer to the exhibit.

The Linux Admin role has been created to manage only Linux VMs in the environment.

However, the Admin1 user does not have access to all Linux VMs.

What step should be taken to grant the proper access?

Add the hosts to the entities KM for the role.

Grant the admin1 user the viewer role (or the cluster.

Add the role to the Linux images.

Add the proper category to each Linux V

6. In which two scenarios is an automated live migration likely to occur? (Choose two)

Cluster resource hotspot

AOS upgrade

Network upgrade

Hypervisor upgrade

7. Which AOS process determine if an I/O from a user will be written to OpLog or to an Extent Store?

Stargate

Curtor

Cassandara

Zeus

8. Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly.

Where in Prism Element should the administrator change the frequency of checks and alerts?

Health Dashboard > Manage Crocks > Frequency

Alerts Dashboard > Manage Checks > Schedule

Health Dashboard > Manage Checks > Schedule

Alerts Dashboard > Manage Checks > Frequency

9. An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.

Which initial step was missed during the post process cluster configuration?

Setting the cluster time zone via PC GUI

Setting the cluster time zone via CVM NCLI

Setting the cluster time zone via PE GUI

Setting the cluster time zone via CVM ACLI

10. An administrator wants to replace and old node with a node of newer generation in a 3-node cluster. The administrator has already chosen the appropriate node. But unable to remove it from the cluster.

Why is the Remove Host option not shown in the exhibit?

The host needs to be placed into maintenance Mode before.

It is only possible to remove a host from a cluster using CL

It is not possible to remove a node from a the cluster using Prism Central

It is not possible to remove a host from a 3-node cluster.

Page 2 of 6

11. What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

A Live Migration will be performed on the affected VMs.

The host will automatically redirect I/O and VMs will continue running.

The impacted host and VMs will automatically shut down.

VM High Availability will restart the impacted VMs on another host

12. An administrator is adding a node with a higher AOS release to an existing cluster.

What is the most efficient action an administrator should take to ensure it is in a supported state?

Destroy cluster and foundation with the new node in place

Add the node to the cluster and leave the existing AOS version in place

Perform standalone reimage of the new node and then add to cluster

Add the node to the cluster and reboot all running VMs to use new release

13. An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.

But users are reporting disk latency.

What could cause the performance issues?

Flash mode is disabled when a node fails.

Compression is disabled on the vDisk storage container.

The VMs vDisks are in multiple containers.

Data size for flash mode exceeds 25% of the SSD capacity.

14. How should an administrator configure a custom alert for a specific VM in Prism?

Modify an existing alert to only alert on the specific V

Modify VM settings to add the custom alert.

Modify the alerts to add a new custom alert policy.

Modify node settings to add the custom alert.

15. An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.

How should the administrator fix this issue?

Reduce the amount of memory assigned to the V

Migrate the VM to a different host.

Add more memory to the V

Increase the memory on the CV

16. What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?

5 Minutes

10 minutes

30 minutes

60 minutes

17. What is Prism Central primarily used for?

Multi-cluster network configuration

Container creation

Multi-cluster Single Sign On

Data reduction configuration

18. A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.

What is the effect on the replicas of the VMs?

Some VM data may be lost

No VMs lose data if the node has two or more SSDs

Some VMs may reboot and gain access to data

No VMs lose data because of RF2

19. An administrator has set up a local web server accessible to the Nutanix clusters.

Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.

Edit LCM Advanced Settings in Prism Element and enter the address of the web server.

Edit LCM Advanced Settings m Prism Central and enter the address of the web server.

Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.

20. An administrator receives complaints of poor performance in a particular VM.

Based on the VM performance metric, what is the most likely cause of this behavior?

Oplog is full cannot serve IO request from this V

The host’s CPU is severely overloaded.

SSD tier is not big enough to serve workloads’ IOPS demand.

The VM needs more vCPUs

Page 3 of 6

21. An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Connect the 10Gb interfaces to the physical switch.

Change the bond mode to balance-slb or balance―tcp.

Remove any 1Gb interfaces still connected from the default bond.

Add a new switch to the network and connect 1Gb interfaces to it.

Change the VLAN ID to a higher priority I

22. A system administrator needs to add more VMs to their Nutanix cluster.

Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

Enable Deduplication and Ensure Coding

Utilize Optimize Resources for VM efficiency

Determine utilization with Cluster Runway

Perform an inventory with Life Cycle Management

23. Where are Leap Availability Zones configured?

Cloud Connect

Controller VM

Prism Element

Prism Central

24. HOTSPOT

What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

25. Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)

AOS

BMC

BIOS

Hypervisor

HBA Firmware

26. Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Deploy the Move appliance.

Use Cross-Hypervisor D

Import the .vmdk into the Image Service.

Use shared nothing live migration.

27. An administrator recently added new SSDs to a Nutanix cluster and knows the firmware will be out of date, Due to security constraints, the cluster does not have access to the Internet.

Which two steps must be completed to update the firmware? (Choose two.)

Download the disk firmware from the OEM's website.

Download a darksite bundle and deploy an internal webserver,

Select Upgrade Software, then upload the firmware bundle.

update the LCM Source and URL to access the firmware bundle.

28. An Administrator is working on a one-node ROBO cluster configurations

Which statement is true for this configuration?

Witness vm required to break cluster quoram

Supported hardware is NX-1175-G5 and G6

witness vm should be 8vcp and 20gb ram

the minimum RPO 8 hours required

29. An administrator needs to limit the amount of storage space that data stored in single container can consume.

Which action should the administrator take?

Enable reservation for rebuild capacity

Set an advertised capacity for the container

Store VM snapshots in a different container

Thick prevision the container

30. A user is complaining about slowness of a mission-critical MSSQL Server. The administrator logs into Prism Element to investigate the VM performance and observes what is shown in the diagram.

Which action would best improve VM performance?

Disable hyperthreading in the BIO

Add additional RAM to the user V

Add additional RAM to the host on which the VM is running.

Ensure the host's CPUs ere not excessively overcommitted.

Page 4 of 6

31. AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.

At which two instances does the address release back to the pool? (Choose two)

The IP address lease expires

The VM NIC is deleted.

The IP address is changed to static.

The VM is deleted.

32. An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

The CD-ROM interface is too slow.

The administrator selected a disk attached before it can boot to a C

The VM needs to have a standard disk attached before it can boot to a C

The bootable CD image is corrupted during creation.

33. Refer to the exhibit.

Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)

Host password changes

Password policy changes

BIOS password changes

CVM password changes

34. An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors.

What is the effect on live migration?

Live migration continues to function as expected and VMs can move to any AHV host.

Live migration is prevented until the administrator enables the legacy migration option.

Live migration is prevented until the administrator manually changes the newer processor level.

Live migration of VMs is prevented between newer and older processors.

35. A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.

What occurs to the cluster and these VMs during an AHV upgrade?

One node hosts two VMs while the node being upgraded is in maintenance mode.

One VM out of the four powers down when the node hosting it reboots.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

The AHV pre-upgrade checks fail until the four VMs are powered off.

36. What is a requirement to enable Flow Neworking?

A dedicated virtual switch has been created for Flow Networking.

Flow Micro segmentation must be enabled.

Microservices infrastructure must be enabled.

Prims Central is using a three-node scale-out deployment

37. An administrator is not able to log into Prism Central by using a new Active Directory user account. After Logging with the local user, the administrator verified that Directory Services and Role Mapping setting are valid.

What is the most likely cause of this issue?

Change password at next logon attribute is set.

User does not belong to the Administrators group.

Active Directory functional level of wrong.

Prism Element authentication is not configured.

38. An administrator is performing validation testing of a new-deploy cluster. During this test, the administrator disconnect each LAN interface from each of the nodes while pinging the hypervisor and guest VMs.

When the first interface is disconnected, pings continue as expected to the hypervisor, but pings stop responding from the guest. Pings continue when the interface is reconnected. When the second interface is disconnected, pings continue to both the hypervisor and guest VMs.

What could be the cause of this error?

This is normal behavior for a LAN Failover

Switch ports are configured with different VLANs

Portfast is not enabled on the switch ports

One of the network interfaces has a bad patch cable.

39. After running an LCM inventory it is noticed that there are a number of firmware and software updates available. The administrator would like to avoid any host reboots, but would like to apply some of the available updates?

Which two updates can be done while avoiding a host reboot? (Choose two.)

2 Drives

AHV

Data Drives

AOS

40. A guest VM should be able to tolerate simultaneous failure of two nodes or drives.

What are the minimum requirements for the Nutanix cluster?

3 nodes with cluster RF 3 and container RF 3

3 nodes with cluster RF 3 and container RF 2

5 nodes with cluster RF 2 and container RF 3

5 nodes with cluster RF 3 and container RF 3

Page 5 of 6

41. An administrator logs into the Nutanix Support Portal and notices there is a new version of

the LCM Framework available. In an effort ensure LCM is providing the latest features, the administrator would like to upgrade LCM.

How can the LCM Framework be upgraded?

Perform an LCM inventory

Upload the latest LCM Framework as an image in the image Configuration in Prism

Upload the latest LCM Framework bundle via Upgrade Software in Prism

Upgrade AOS

42. An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event

Which storage optimizations should the administrator set to meet the requirements?

Compression only

Deduplication and Erasure Coding

Compressoion and Deduplication

Compression Deduplication and Erasure Coding

43. When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Restart on a best-effort basis if resources are available

Perform a live migration to other hosts in the AHV cluster

Restart on other hosts in the AHV cluster

Perform a live migration on a best-effort basis if resources are available

44. When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?

2000

2074

8080

9943

45. An administrator is concerned about the amount of data that a VM reading and writing to the storage fabric.

Which metric will provide that data?

Host Hypervisor IO Bandwidth

Host Disk IOPS

VM Storage Controller IOPS

VM Storage Controller Bandwidth

46. Which component can be associated with a storage policy?

Subnet

Catalog

Posts

Nutanix Free Dumps

Get NCP-MCI-6.5 Dumps Full Version

Q&As: 172
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Good NCP-MCI-6.5 Exam Dumps Save Your Preparation Time

Related

Posts

Improve Your Knowledge with NCP-CI-AWS Exam Dumps

Online NCP-DB-6.5 Exam Dumps Help You Build Confidence

Study Online NCP-MCA Exam Dumps to Pass

Online NCM-MCI-6.5 Exam Dumps Help You Build Confidence

About Us

EMAIL

Services

Opening Hours